Universal Tool Milling and Drilling Machine

Maho MH 800

Germany

unknown

used

on request

INNO32481

Machine was regularly serviced, was in operation until recently, with documentation and accessories, an on-site inspection is possible.

more

Universal Tool Milling and Drilling Machine

Friedrich Deckel Ag FP 3NC

Germany

unknown

used

on request

INNO32475

Control voltage: 42/48V, max. fuse rating: 35A, operating voltage: 380V, rated current: 20/22/24A, control: DECKEL DIALOG 11, an on-site inspection is possible.

more

Universal Tool Milling and Drilling Machine

Friedrich Deckel Ag FP 1

Germany

unknown

used

on request

INNO32473

There are five Friedrich Deckel FP 1 machines available. An on-site inspection is possible.

more

Milling Machines

Wabeco 1140013

Germany

2005

used

on request

INNO32449

Max. speed: 7500rpm, voltage: 230V, current consumption: 8.6A, frequency: 50Hz, power: 2000W. The machine can be controlled using a standard computer. The A-axis can be controlled and positioned via the software. Including software/CD. Without PC. An on-site inspection is possible.

more

CNC Trun and Milling Center

Okuma OKUMA Mac Turn 250

Germany

unknown

used

on request

INNO32440

Rated voltage: 400V, phases: 3, frequency: 50Hz, max. power consumption: 57.9kVA, total current consumption: approx. 83.8A, max. motor current consumption: 94A, current interruption at: 10kA, connected load: 47.8kVA, control: Okuma OSP-U100L, an on-site inspection is possible.

more

Universal Tool Milling and Drilling Machine

Freidrich Deckel Ag FP4A

Germany

1988

used

on request

INNO32423

Rated current: 25A, control voltage: 24V, operating voltage: 380V, control: DECKEL Dialog 2, weight: approx. 1.8t, without clamping systems or tools, Z-axis scale defective, screen display partially incorrect, not operational, an on-site inspection is possible.

more

Universal Tool Milling and Drilling Machine

Friedrich Deckel Ag FP 1

Germany

1972

used

on request

INNO32422

Controls: Heidenhain 2-axis digital readout, without clamping systems or tools, with large table, an on-site inspection is possible.

more

Universal Tool Milling and Drilling Machine

Friedrich Deckel Ag FP 1

Germany

1990

used

on request

INNO32421

Controls: Heidenhain 3-axis digital readout, without clamping systems, tools and large table, with small table, machine makes noticeable operating noises, an on-site inspection is possible.

more

CNC Bed Milling Machine

Mte BF 2200

Germany

2014

used

on request

INNO32420

X-axis: 2000mm, Y-axis: 1200mm, Z-axis: 1500mm, table surface: 2200x1200mm, number and width of T-slots: 7x22mm, distance between T-slots: 140mm, max. workpiece weight on table: 7.2t, working feed rate: 0-12,000mm/min, rapid traverse: 15m/min, acceleration: 1.5m/s², hydraulic unit power: 5.5kW, pump flow rate: 25l/min, working pressure: 110bar, tank capacity: 180l, cooling unit capacity: 6,100W, compressor power: 2.61kW, length: 5820mm, width: 6723mm, height: 3602mm, weight: 17t, spindle operating hours: 5,000h, with documentation, an on-site inspection is possible.

more

Milling Machine

Tos Obrabeci Stroje FNK 2

Germany

1998

used

on request

INNO32411

Rated current: 7.6A, frequency: 50Hz, control voltage: 110V, machine lamp: 24V, degree of protection: IP54, connected load: 5kVA, weight: 1.65t, with CE marking, an on-site inspection is possible.

more

Universal Milling Machine

Reckermann 1300 Kombi

Germany

2020

used

on request

INNO32363

A CNC universal bed-type milling machine is offered. Table setup area: approx. 1300mm, operating hours: approx. 100h, spindle hours S1: 54h, program run time: 159h, control: HEIDENHAIN TNC 320, operating voltage: 400V, total rated current: 50A, fuse rating: 63A, spindle speed: 32-1400rpm, control: HEIDENHAIN TNC 320. Equipped with full enclosure, coolant system, work area lighting, chip guard. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3910mm/2700mm/2800mm. Inspection by prior arrangement is possible.

more

CNC Milling Machine

Fehlmann PICOMAX 100 CNC

Germany

1991

used

on request

INNO32354

Travel X/Y/Z: 850mm/435mm/210mm, vertical head adjustment: approx. 590mm, table dimensions X/Y: approx. 1570mm/500mm, max. table load: 250kg, spindle taper: Fehlmann SF32, max. spindle speed: 7100rpm, spindle power: approx. 5kW, drilling capacity in steel: 30mm, tapping capacity in steel: M20, control: Mach3 with touchscreen PC, weight: approx. 3000kg. The machine was subsequently retrofitted with a Mach3 control. An on-site inspection is possible.

more

HSC Milling Machine

Röders Tec RXP400

Germany

2017

used

on request

INNO32350

Number of axes: 5, max. spindle speed: 50,000rpm, spindle taper: HSK E25, working area dimensions: 410x294x210mm, table dimensions: 450x300mm, T-slots: 12mm, spacing: 50mm, max. workpiece weight: 100kg, feed rate: 0-42,000mm/min, tool changer positions: 18 (linear), max. current consumption: 18A, connected load: 10kVA, length: 1995mm, width: 2480mm, height: 2080mm, weight: 3.2t, operating hours: 57,869h, spindle hours: 1,797h, an on-site inspection is possible.

more

CNC Universal Milling Machine

Deckel Maho DMU 50

Germany

2005

used

on request

INNO32290

X-axis: 500mm, Y-axis: 450mm, Z-axis: 400mm, swivel rotary table dimensions: 630x500mm, max. table load: 200kg, swivel range: -5 to 110°, continuously variable speed: 20-10,000/min, drive power (100%/40% duty cycle): 9kW/13kW, torque (40% duty cycle): 82Nm, input resolution: 0.01mm, positioning tolerance: 0.010mm, rapid traverse: 24m/min, feed speed: 20m/min, number of SK40 tool positions (DIN 69871): 30, tool diameter (speed-dependent): D80-D130, max. tool length: 290mm, max. tool weight: 6kg, connected load: 17kW, control: Siemens 840D Powerline ShopMill, length: 4860mm, width: 4350mm, height: 2424mm, transport dimensions: 2210x2120x2150mm, weight: 4.05t, operating hours power-on time: 35,880h, spindle hours: 9609h. Equipment: digital drive and hydraulic clamping (positioning operation only), electronic angle display and plane transformation, chain magazine with double gripper, additional cabin door on the right, 80l coolant system, coolant/compressed-air switching, flushing gun, oil pan drawing, MDE interface (machine on, machine running, piece counter), documentation in German, 3D machine model for kinematic simulation in the CAM programming system (IGES, STEP format), numerous SK40 tool holders (DIN 69871), Heidenhain TS641 infrared touch probe, electronic handwheel, additional V24 RS232 interface on the control cabinet. An on-site inspection is possible.

more

CNC Universal Milling Machine

Abene VHF-360

Germany

2019

used

on request

INNO32259

Travel X/Y/Z: 650mm/500mm/475mm, table dimensions X/Y: 1530mm/450mm, max. table load: 400kg, spindle taper: SK40, max. spindle speed: 4000rpm, spindle power: 7.5kW, milling head swivel range: 140°, control: Heidenhain TNC 620. Weight: approx. 2750kg, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2050mm. An on-site inspection is possible.

more

CNC Universal Milling and Drilling Machine

Hermle UWF 801

Germany

1987

used

on request

INNO32251

X-axis: 500mm, y-axis: 430mm, z-axis: 400mm, table dimensions: 510x450x410mm, max. table load: 250kg, angular clamping table: 800x390mm, feed rate x-/y-axis: 4-1600mm/min, z-axis: 4-1000mm/min, feed force: 5000N on all axes, rapid traverse x-/y-axis: 1.6m/min, z-axis: 1m/min, tool holder (DIN 2079): ISO 40, cutter drawbar thread: M16, hydromechanical tool clamping: 12,000Nm, quill stroke: 80mm, drive power: 3kW, 18-speed sliding-gear transmission: manually or automatically selectable, torque: 5Nm, spindle speed: 50-2500rpm, connected load: 6kW, control: Heidenhain TNC 114B (hand control type HS262), display resolution: 0.005mm, length: 1400mm, width: 1300mm, height: 1830mm, weight: 1.6t, space requirement: 2300x2300x2400mm, equipment: machine light, coolant tank: 18l, external coolant supply: 3bar, various tool holders, spindle tool. On-site inspection is possible.

more

5-Axis CNC Milling Machine

Deckel Maho DMU 100 T

Germany

2003

used

on request

INNO32250

A Deckel Maho 5-axis CNC milling machine in need of repair is offered. Travel X/Y/Z: 1080mm/710mm/710mm, NC-mounted rotary table C-axis X/Y: 800mm/620mm, swiveling milling head B-axis: 90°, max. spindle speed: 12000rpm, tool taper: SK40, tool positions: 32, control: Heidenhain iTNC 530, control-on hours: 75100h, program run hours: 24720h. Equipped with internal air blast supply, external coolant supply, Heidenhain infrared touch probe, Heidenhain electronic handwheel, Rotoclear rotating inspection window, chip conveyor, oil mist extraction system, coolant system with paper band filter, chip flushing gun, work area light and clamping support next to the mounted rotary table for longer workpieces. The milling head clamping system is leaking, but the machine is still operational. An on-site inspection is possible.

more

CNC Universal Milling Machine

Hermle U 1000 S

Germany

2000

used

on request

INNO32233

X-axis: 1000/1245mm, Y-axis: 630mm, Z-axis: 550mm, angle table: 1200x630mm, quill stroke: 75mm, tool holder: SK40, drive power: 7.5kW, spindle speed (continuously variable): 20-7,000/min, feeds: 1-20,000mm/min, rapid traverse: 20,000mm/min, connected load: 14kW, rated current: 24A, control: HEIDENHAIN TNC 426 with hand-held control unit, total connected load: 17kVA, weight: 6t, operating hours, machine on: 122,355h, control on: 18,579h, program run: 36,747h, with Knoll 400 K-1 scraper belt conveyor. Equipment: manually swivelling vertical milling head, protective enclosure with viewing window, coolant system, chip conveyor, HEIDENHAIN 3D touch probe TS 642. An on-site inspection is possible.

more

Milling Machine

Caser-saimp FM1X

Germany

1978

used

on request

INNO32194

A Caser-Saimp universal milling machine in need of repair but still operational is offered. Spindle taper: ISO 40, table size X/Y: approx. 1300mm/265mm, travel X/Y/Z: approx. 750mm/265mm/430mm, max. spindle speed: 1700rpm, spindle drive power: approx. 4kW. The X-axis can no longer be moved using the power feed. A servo motor was retrofitted to the X-axis (white assembly). Inspection possible by arrangement.

more

Tool Milling Machine

Optimum OPTImill MT 50

Germany

2017

used

on request

INNO32164

Offered for sale is an Optimum toolroom milling machine. Drilling capacity in steel: 30mm, continuous drilling capacity in steel: 25mm, spindle taper: ISO40, quill travel: 120mm, milling head swivel range: +/-45°, cross table X/Y: 1000mm/240mm, max. cross table load: 160kg, X/Y/Z travel: 580mm/200mm/340mm, X-axis table feed: 720mm/min. Including accessories. The tray has been cut open on the right-hand side so that longer workpieces can also be machined. Dimensions X/Y/Z: approx. 2270mm/1500mm/2100mm, weight: approx. 900kg. An on-site inspection is possible.

more

All Offers / Metal processing machines / Milling machines