Innovac GmbH Used machines from Germany
Innovac used-machines Machining centers [1 - 20 of 127]
Universal-Machining-Centre-Deckel-Maho-DMU-70-eVolution used
Universal Machining Centre
Deckel Maho DMU 70 eVolution
Germany
2001
used
on request
INNO32830
Offered is a machining center with an enclosed work area. Swivelling control panel, spin window in the work area door. Inspection possible by arrangement.
Vertical-Machining-Center-Haas-SMINIMILL-HE used
Vertical Machining Center
Haas SMINIMILL HE
Germany
2002
used
on request
INNO32824
Offered is a machining center with a vertical spindle. Tool changer, missing safety door. Inspection possible by arrangement.
Vertical-Machining-Center-Deckel-Maho-DMC-635-V used
Vertical Machining Center
Deckel Maho DMC 635 V
Germany
2013
used
on request
INNO32822
Offered is a machining center with a vertical spindle. X/Y/Z travels: 635mm/510mm/460mm, spindle speed: 20-10000rpm, spindle torque: 83Nm, X/Y/Z rapid traverse: 30m/min, X/Y table clamping surface: 560mm/790mm, maximum table load: 600kg, tool interface: SK40, DIN 69871, tool change time: 1.6s, chip-to-chip time: 6s, control voltage ON counter: 18687h, program running counter: 7844h, control: Siemens Sinumerik 840D Solutionline with Operate, ShopMill Open and DMG ERGOline Control, 20-position tool magazine with double gripper, water-cooled motor spindle, direct position measuring systems X/Y/Z with sealing air, electronic handwheel, operating mode 4 with SMARTkey, production package 2 with internal coolant supply at 20bar, 600l tank, paper belt filter, scraper-type chip conveyor with 950mm discharge height, closed enclosure roof, work area lighting, bed flushing, flushing gun, rotating viewing window, coolant/air-blast switchover, oil mist separator AFS 1100 with year of manufacture 2022, Heidenhain TS 649 DMG workpiece touch probe, SK40 accessories: 12 drill chucks, 18 fixed Weldon tool holders, 7 collet chucks, 4 milling cutter heads, 2 × 100er: Translation unresolved (rule 30), 2 × 40er: Translation unresolved (rule 30), 2 machine vises. Inspection possible by arrangement.
Profile-Machining-Centre-Schüco-MFM-AF-200 used
Profile Machining Centre
Schüco MFM AF 200
Germany
2012
used
on request
INNO32785
Offered is a profile machining centre with a swivelling workpiece support. Control: operator panel with screen, keyboard and separate controls, pneumatic workpiece clamps, tool rack with five tool holders fitted with tools, protective hood with viewing window. Inspection possible by arrangement.
CNC-Horizontal-Machining-Center-Mori-Seiki-NH5000-40-DCG used
CNC Horizontal Machining Center
Mori Seiki NH5000/40 DCG
Germany
2006
used
on request
INNO32750
Chain-type tool magazine: 60, commissioning date: 26.07.2007, scraper-type chip conveyor, spindle max. 14000rpm, NC table with a min. indexing increment of 0.001°, pallet positioning with a minimum angular increment of 0.001° instead of the standard version with 1°, chain-type tool magazine with 60 positions, I/F for 70bar high-pressure coolant system (with side-through spindle coolant supply), DLAB 50F transformer: 54kVA, control options: ATA card, AI Contour Control and Fast Data Server, coolant gun for cleaning workpieces and fixtures, control: MSX-701 III, NC software: G103/02.4, PLC software: I81191A08, MAPPS I98143B47, machining time: approx. 13901h, power-on time: approx. 32187h, weight: 12.4t. Inspection possible by arrangement.
CNC-Machining-Center-Mori-Seiki-MV-40B-40 used
CNC Machining Center
Mori Seiki MV-40B/40
Germany
unknown
used
on request
INNO32731
Control: MSC-516. Accessories are available and included in the offer. The exact scope of delivery is yet to be clarified. Inspection possible by prior arrangement.
CNC-Machining-Center-Hermle-U-630-T used
CNC Machining Center
Hermle U 630 T
Germany
2001
used
on request
INNO32721
A CNC machining center with 3 axes is offered. Travel X/Y/Z: 630mm/500mm/500mm. Table load capacity: 400kg. Tool taper: SK 40. Number of axes: 3. Spindle hours: approx. 7300h. Operating hours in motion: approx. 7300h. The buffer battery must be replaced. The hour meter readings are stated as approximate values. Control: Heidenhain TNC 426. Equipped with a 16-position chain-type tool changer, coolant system, chip flushing gun, touch probe and handheld control unit. Weight: approx. 4800kg. Inspection possible by arrangement.
CNC-Machining-Center-Hermle-C-600-T used
CNC Machining Center
Hermle C 600 T
Germany
2002
used
on request
INNO32720
A CNC machining center with 4 axes is offered. Travel X/Y/Z: 600mm/450mm/450mm. Table load: 1000kg. Tool taper: SK 40. Number of axes: 4. Machine body: mineral casting. Spindle hours: 6372h. Operating hours in motion: 6392h. Control: Heidenhain TNC 530. Equipped with a permanently mounted rotary clamping fixture, 30-position carousel tool changer, coolant system, chip washing gun, touch probe and handheld control module. Weight: approx. 6500kg. Inspection possible by arrangement.
Universal-Machining-Centre-Hermle-C-800-U used
Universal Machining Centre
Hermle C 800 U
Germany
1997
used
on request
INNO32719
A 5-axis machining center is offered. Travels X/Y/Z: 800mm/600mm/500mm. Table clamping surface X/Y: 540mm/540mm. Maximum workpiece weight: 300kg. Rapid traverse X/Y/Z: 35m/min. Tool magazine: 30 positions. Control: HEIDENHAIN TNC 430. Equipped with an NC swiveling rotary table, tool changer, protective enclosure and coolant system. Axis damage requiring repair. Repair quotation from the manufacturer is available. Inspection possible by arrangement.
CNC-Machining-Center-Willemin-macodel-S.a.-W-408B used
CNC Machining Center
Willemin-macodel S.a. W 408B
Germany
2002
used
on request
INNO32700
Offered for sale is a CNC machining center. Control: GE Fanuc Series 16i-M. Equipped with a fully enclosed machine guarding, viewing windows, electronic handwheel and signal light. Inspection possible by arrangement.
CNC-Gantry-Machining-Center-Reichenbacher-Univers used
CNC Gantry Machining Center
Reichenbacher Univers
Germany
unknown
used
on request
INNO32684
Offered is a CNC portal machining center with multiple clamping. Equipped with a large clamping table, several workholding fixtures, numerous hose connections and protective curtains on the machining portal. Inspection possible by arrangement.
Vertical-CNC-Machining-Center-Hermle-C-1200-V used
Vertical CNC Machining Center
Hermle C 1200 V
Germany
1999
used
on request
INNO32671
A vertical CNC machining center is offered. Heidenhain CNC control. Equipped with: Tool magazine with tool changer, chip conveyor, enclosed work area with safety doors, separate CNC control panel. Weight: approx. 13000kg. The machine is defective and therefore in need of repair. Viewing possible by appointment.
Vertical-3-Axis-CNC-Machining-Center-Tajmac-Zpc-S.s.-MCFV-1060S used
Vertical 3-Axis CNC Machining Center
Tajmac Zpc S.s. MCFV 1060S
Germany
2008
used
on request
INNO32612
X-axis travel: 1016mm, Y-axis travel: 610mm, Z-axis travel: 760mm, distance from spindle nose to pallet: 150-910mm, distance from spindle axis to column: 635mm, distance from spindle axis to front of machine: 820mm, distance from table to floor: 959mm, working surface dimensions: 1270x590mm, number of T-slots: 5, T-slot width: 18mm, center T-slot dimensions: 18 H6 mm, centering bore diameter: 30 H6 mm, T-slot spacing: 125mm, max. table load: 1350kg, working feed rate: 0-15m/min, max. programmable feed rate: 40m/min, rapid traverse speed: 40m/min, acceleration: 5m/s², max. spindle speed: 10,000rpm, control system: HEIDENHAIN, length: 2750mm, width: 2120mm, height: 2100mm, weight: approx. 7.7t, operational hours counter: approx. 17,000h, including documentation. An on-site inspection is possible.
CNC-Compact-Machining-Center-Spinner-VC810-II used
CNC Compact Machining Center
Spinner VC810-II
Germany
2004
used
on request
INNO32524
X-axis travel: 810mm, Y-axis travel: 610mm, Z-axis travel: 610mm, rapid traverse: 30m/min, tool holder: SK40/DIN 69871A, pull stud: DIN 69872A, tool changer: 32 tools, program memory expansion: 64MB (ATA memory card), machine color: RAL 7035/5008, mains voltage: 400V, mains connection: 3/PE~ (three-phase AC with protective earth), mains frequency: 50/60Hz, operating current (I_B): 50A, rated current (I_N): 50A, programming interface: Siemens ShopMill, max. spindle speed: 8,000rpm, screen: 10.4-inch color display, control system: Siemens 810DE PowerLine, operating hours: 37,506h, including documentation. On-site inspection is possible.
Vertical-CNC-Machining-Center-Haas-VCE-1600W used
Vertical CNC Machining Center
Haas VCE 1600W
Germany
2000
used
on request
INNO32508
Offered for sale is a vertical CNC machining center with tool changer. Control system: HAAS CNC control with operator monitor and keyboard. Equipped with automatic tool changer, machine table, enclosed work area, control pendant and tool cart with tool holders. Inspection possible by arrangement.
Vertical-CNC-Machining-Center-Hardinge-Bridgeport-XR-1000 used
Vertical CNC Machining Center
Hardinge Bridgeport XR 1000
Germany
2008
used
on request
INNO32496
Travels X/Y/Z: 1020mm/610mm/610mm, table dimensions X/Y: 1300mm/600mm, max. table load: 900kg, spindle taper: SK40, spindle speed: 12000rpm, tool positions: 30, control: Heidenhain iTNC 530, machine operating hours: 27500h, spindle operating hours: 12700h. Including 3D touch probe, through-spindle coolant at 20bar, additional external air cooling and scraper belt chip conveyor. The machine was used in single-shift operation.
Machining-Center-Schwäbische-Werkzeugmaschinen-BAW04-22 used
Machining Center
Schwäbische Werkzeugmaschinen BAW04-22
Germany
2011
used
on request
INNO32488
A machining center from Schwäbische Werkzeugmaschinen in need of repair is offered. Travels X/Y/Z1/Z2: 400mm/500mm/425mm/425mm, Y tool-change position: 775mm, swivel axis Q: 180°, rotary axes: A + U, number of spindles: 2, spindle distance: 400mm, max. spindle speed: 17500rpm, spindle bearing diameter: 80mm, rapid traverse: 100m/min, max. tool positions: 232, tool interface: HSK-A63, max. tool diameter: 80mm, max. tool length: 300mm, max. tool weight: 10kg, Control: Siemens 840D. Motor of the C1 axis defective, W axis is defective. Replacement required. Machine dimensions X/Y/Z: 4350mm/7000mm/4000mm, weight: 14.5t. Documentation available. Inspection possible by arrangement.
Vertical-CNC-Machining-Center-Hurco-VMX24 used
Vertical CNC Machining Center
Hurco VMX24
Germany
unknown
used
on request
INNO32468
A CNC machining center with T-slot table is offered. Control: HURCO Ultimax with dual-screen console. Equipped with several fixtures mounted on the machine table, coolant system and available HURCO documentation including training documentation for the Ultimax CNC control. Inspection possible by appointment.
CNC-machining-center-Maho-Mahomat-600 used
CNC machining center
Maho Mahomat 600
Germany
1994
used
on request
INNO32463
A Maho 4-axis CNC machining center is offered for sale. X/Y/Z travel: 600mm/500mm/400mm, tool holder: ISO 40, max. spindle speed: 6000rpm, feed rate: 6m/min, rapid traverse: 13m/min, operating hours/power-on hours: approx. 58569h, control: Philips CNC 432. Equipped with through-spindle coolant supply with high-pressure pump, fully enclosed splash guard, automatic tool changer, 2-pallet changer and chip conveyor. The main spindle is defective and has already been removed from the machine. The machine is not operational. Documentation available. An on-site inspection is possible.
CNC-Machining-Center-Stama-MC-326 used
CNC Machining Center
Stama MC 326
Germany
2001
used
on request
INNO32455
A CNC machining center is offered. Control: CNC control with control panel. Equipped with workholding fixture and coolant system. The boards are presumably defective. Inspection possible by prior arrangement.