▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [61 - 80 of 1220]

Vertical EDM Machine

Ingersoll Hansen GANTRY 500

Germany

1996

used

on request

INNO32429

X-axis: 525mm, Y-axis: 400mm, Z-axis: 450mm, Y-axis at electrode change and loading position: 675mm, internal dimensions of working tank: 750x650x420mm, max. dielectric level: 375mm, max. head load: 100kg, distance from tool carrier plate to worktable: 135-585mm, integrated C-axis speed, adjustable: 1-20rpm, measuring resolution: 0.001°, load capacity with manual electrode change: 50kg, load capacity with automatic electrode change: 15kg, support surface: 730x630mm, worktable load capacity: 1,000kg, connected load: 7kVA, fuse protection: 25A, length: 2900mm, width: 2200mm, height: 2653mm, machine weight: 4.4t, generator weight: 200kg, with documentation, C-axis, EW20 electrode changer, TAE M10 cooling unit, CO2 fire extinguishing system, 4µm filter system, locators, MultiProg software, an on-site inspection is possible.

Folding Machine

Jorns Schweiz NORMA LINE-125-SM-OP-6

Germany

1989

used

on request

INNO32428

Working width: 6000mm, max. sheet thickness: 1.25mm, control panel: Siemens SIMATIC HMI, including electric rotary shear, an on-site inspection is possible.

Bar Loader Magazine

Lns SUPER HYDROBAR 6.60 H5-4.4

Germany

2001

used

on request

INNO32427

Number of guide tubes: 3, mains connection: 380V, 3-phase, frequency: 50Hz, control voltage: 24VDC, rated current / FLA: 5A, an on-site inspection is possible, not connected to power.

Center Lathe

Schaerer

Germany

unknown

used

on request

INNO32425

Thread-cutting gears, number of teeth: 30, 57, 60, 105, 120, 127, equipment: lead screw for thread cutting, separate feed system, automatic longitudinal and cross feed, change gear for feed and thread gearbox, back gear in the headstock, three-jaw chuck, cross slide and compound slide, four-way tool post, tailstock, an on-site inspection is possible.

Tool Presetting and Measuring Device

Gildemeister De Vlieg

Germany

unknown

used

on request

INNO32424

Display: microset DPS, an on-site inspection is possible, without power.

Milling Machine

Tos Obrabeci Stroje FNK 2

Germany

1998

used

on request

INNO32411

Rated current: 7.6A, frequency: 50Hz, control voltage: 110V, machine lamp: 24V, degree of protection: IP54, connected load: 5kVA, weight: 1.65t, with CE marking, an on-site inspection is possible.

Single-Column Knuckle-Joint Press

May Pressenbau MKN1-100/6

Germany

unknown

used

on request

INNO32410

There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible.

CNC Press Brake

Steiner AK 25/350

Germany

1987

used

on request

INNO32408

Control: Cybelec DNC 600S. Inspection by appointment possible.

Centre Lathe

Knuth Compass 200/1500

Germany

2001

used

on request

INNO32407

Total power: 6kW, voltage: 400V, frequency: 50Hz/3-phase. Documentation available. Inspection by appointment possible.

Vertical Machining Center

Bridgeport VMC 1000-30

Germany

unknown

used

on request

INNO32403

A CNC machining center is offered. Control: Heidenhain TNC 426, spindle motor power: 13kW, full-load current: 30A, internal coolant supply: 10bar, spindle hours: 21704h, machine power-on hours: 51118h, control power-on hours: 25924h, program run time: 20017h. Equipped with internal coolant supply 10bar, 4th and 5th axes and machine vises. Weight: approx. 4300kg. An on-site inspection is possible.

Vertical Machining Center

Bridgeport XR 1000

Germany

2007

used

on request

INNO32396

A vertical CNC machining center in need of repair is offered for sale. Main motor: 15kW (S1), max. current: 36A, phases: 3, control: Heidenhain. Weight: approx. 7000kg. The main spindle has bearing damage, and the control requires overhaul. An inspection is possible by prior arrangement.

CNC Universal Circular Grinding Machine

Kellenberger KEL-VISION

Germany

2004

used

on request

INNO32390

Weight: 4.7t, automatic system operating hours: 41,411h, feed operating hours: 14,251h, an on-site inspection is possible.

Round-Table Surface Grinder

Elb-schliff Rotary H6 STC

Germany

2011

used

on request

INNO32388

Grinding diameter: 600mm, grinding height: 400mm, max. table load: 500kg, length: 2540mm, width: 2130mm, height: 2350mm, weight: 5.2t, with manual, installation instructions and operating instructions, special face grinding program, 1x standard grinding wheel holder 25-100mm for wheel bore Ø127, tools (1x open-end wrench, 1x removal screw). An on-site inspection is possible.

Universal Center Lathe

Tos Trencin SN 500S

Germany

1998

used

on request

INNO32385

Speed: 12.5-2000/min, with documentation. An on-site inspection is possible.

Saw Blade Sharpening Machine

Vollmer CNG

Germany

unknown

used

on request

INNO32383

Max. saw blade diameter: 800mm, feed speeds: 3, max. feed 80teeth/min, motors: 2. With dressing device and coolant system. All motor cables and switch connectors were replaced. The machine was completely dismantled, cleaned and workshop-overhauled. Documentation available. Inspection possible by appointment.

Vertical Machining Center

Mazak VQC 15/40

Germany

1986

used

on request

INNO32375

A vertical CNC machining center is offered. X/Y/Z-axis travels: 560mm/410mm/381mm, spindle speed: 60-6000rpm, drive power: 3.7/5.5kW, table size: 410mm × 900mm, max. table load: 300kg, tool shank: ISO 40 (MAS-BT40), rapid traverse X/Y/Z: 24/24/18m/min, control: Mazatrol CAM M-2. Equipped with original parameter lists. Weight: approx. 4200kg, overall dimensions X/Y/Z: approx. 2300mm/2000mm/2641mm. The program is missing because the machine has been disconnected from power for several years. Documentation available. Inspection possible by appointment.

CNC Lathe

Spinner TTC 300 42SMMCY

Germany

2010

used

on request

INNO32374

A Spinner CNC lathe in need of repair is offered. Control: FANUC Series 31i-A, spindle operating hours: approx. 36824h. The lower turret is locked but incorrectly indicates unlocked status. A broken spring is suspected as the cause. Documentation available. Inspection by appointment possible.

Universal Milling Machine

Reckermann 1300 Kombi

Germany

2020

used

on request

INNO32363

A CNC universal bed-type milling machine is offered. Table setup area: approx. 1300mm, operating hours: approx. 100h, spindle hours S1: 54h, program run time: 159h, control: HEIDENHAIN TNC 320, operating voltage: 400V, total rated current: 50A, fuse rating: 63A, spindle speed: 32-1400rpm, control: HEIDENHAIN TNC 320. Equipped with full enclosure, coolant system, work area lighting, chip guard. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3910mm/2700mm/2800mm. Inspection by prior arrangement is possible.

CNC Lathe

Oerlikon Boehringer VDF 400 C-U

Germany

1985

used

on request

INNO32358

Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026.

CNC Machining Center

Matec 30HV

Germany

1999

used

on request

INNO32355

Travel X/Y/Z: 2000mm/600mm/800mm, rapid traverse: 30m/min, feed rate: 30m/min, max. spindle speed: 9000rpm, tool holder: SK40, tool positions: 48, clamping plate: 650×2500mm, control: Bosch Type 3 OSA. Documentation available. An on-site inspection is possible.