Press

Wmw KD2320

Germany

1971

used

on request

INNO27269

Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg.

more

CNC Machining Center

Axa DBZ 2

Germany

2012

used

on request

INNO27230

Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available.

more

Milling Machine

Steinel BZ20

Germany

1982

used

on request

INNO27209

Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier.

more

CNC Cycle Lathe

Wagner WDE 360

Germany

2014

used

on request

INNO27207

Travel X/Y: 230mm/870mm, speed: 3000rpm, max. spindle bore 52mm, max. turning diameter over bed/face slide: 360mm/180mm, max. workpiece length: 870mm, bed width: 1000mm, max. tailstock stroke: 130mm, max. quill diameter: 63mm. Dimensions X/Y/Z: approx. 2500mm/1700mm/2000mm, weight: approx. 1600kg. Documentation available.

more

Deep Hole Drilling Machine

Tbt T30-1000 KTN/NC

Germany

unknown

used

on request

INNO27205

Travel X/Y/Z: 700mm/300mm/1000mm, rapid traverse X/Y/Z: 4000mm/4000mm/2000mm /min, drilling method: ELB, number of drilling spindles: 1, min./max. drilling diameter: 4mm/30mm, max. drilling depth: 1000mm, table dimensions X/Y: approx. 850mm/750mm.

more

Deep Hole Drilling Machine

Tbt T10-500

Germany

unknown

used

on request

INNO27204

Drilling diameter: 2mm-10mm, max. drilling depth: 500mm, drilling method: ELB, speed: 8000rpm. Dimensions X/Y/Z: approx. 2300mm/1300mm/1600mm, weight: approx. 2000kg. Including cooling with automatic filter and magnetic chip conveyor.

more

CNC Vertical Machining Center

Mazak AJV 60/120

Germany

1990

used

on request

INNO27196

Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible.

more

CNC Milling Machine

Mazak FH 880

Germany

1997

used

on request

INNO27195

Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible.

more

Row Drilling Machine

Elu S156

Germany

1976

used

on request

INNO14814

Number of drilling heads: 4.

more

CNC Lathe

Monforts RNC 200 A

Germany

2000

used

on request

INNO27182

Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available.

more

Wire Drawing Plant

Koch KHZ 5000

Germany

1993

used

on request

INNO27180

A wire drawing unit is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 5000, year of manufacture: 1993, number of draws per block: 1, drawing drum diameter: 700mm, drawing force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of construction: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Including hydraulic unit G13 AK. Documentation available.

more

Tube Furnace

Thermconcept ROHT 50/200/17

Germany

2018

used

on request

INNO27169

A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available.

more

Tube Furnace

Thermconcept ROK 70/500/11

Germany

2023

used

on request

INNO27168

A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available.

more

CNC Tool Grinding Machine

Anca PGX Grinder

Germany

1999

used

on request

INNO27151

Grinding wheel diameter: 200mm, max. grinding diameter/length: 150mm/760mm, travel X/Y/Z: 760mm/460mm/360mm, swivel range A/C: 270°/360°, speed: 3000rpm. Dimensions X/Y/Z: approx. 2200mm/2100mm/2700mm, weight: approx. 6500kg.

more

CNC Punch Grinding Machine

Anca PGX+

Germany

2007

used

on request

INNO27150

Spindle power: 22kW, grinding wheel diameter: 762mm, grinding wheel speed: 3000rpm, max. punching size: 150mm.

more

Surface Grinding Machine

Monoprecis 114S

Germany

1984

used

on request

INNO27149

Table size X/Y: 500mm/200mm, max. table load: 200kg, longitudinal movement/transverse movement: 540mm/240mm, table grinding wheel distance: 400mm, grinding wheel size: 180mm/32mm/20mm, speed: 2850rpm. Dimensions X/Y/Z: approx. 1500mm/1100mm/2000mm, weight: approx. 1500kg.

more

CNC Lathe

Hardinge SG-42

Germany

unknown

used

on request

INNO27148

Max. swing diameter over bed: 540mm, max. turning diameter: 240mm, max. machining length: 330mm, traverse path: X/Y: 135mm/350, spindle bore: 40mm, speed: 4400rpm. Tool positions: 12, max. tool size square/round: 19mm/31mm, chuck size: 152mm, traversing speed X/Z: 12/16 m/min. Dimensions X/Y/: approx. 2200mm/1700mm/1700mm, weight: approx. 3600kg, control: GE Fanuc 18T.

more

Internal Cylindrical Grinding Machine

Overbeck Zetto 30

Germany

1986

used

on request

INNO27147

Center height: 80mm, sanding length: 120mm, jaw chuck diameter: 125mm, max. sanding diameter: 80mm.

more

Automatic Punching and Bending Machine

Bihler GRM-50

Germany

1979

used

on request

INNO24616

Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg.

more

CNC Press Brake

Eht EHPS 20-35

Germany

1995

used

on request

INNO27107

Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible.

more

All Offers / Metal processing machines