Horizontal Boring Machine

Wagner WBX 1003

Germany

1987

used

on request

INNO27026

A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available.

more

Billet Shear

Peddinghaus 214/200

Germany

unknown

used

on request

INNO27021

A Peddinghaus 214/200 billet shear is available. Cutting capacity: square: 70mm, round: 80mm, flat: 180mm x 35mm/250mm x 28mm, weight: approx. 5000kg.

more

Laser Cutting Machine

Bystronic ByVention 2,2kW

Germany

2008

used

on request

INNO27025

Laser type: CO2, laser power: 2.2kW, working range X/Y/Z: 1500mm/3000mm/100mm, max. material thickness: aluminum: 8mm, mild steel: 10mm, stainless steel: 6mm, max. workpiece weight: 890kg. Positioning speed X/Y: 100m/min, simultaneous positioning speed: 140m/min, total energy consumption: 37kW, max. sheet weight: 70kg/m². Dimensions X/Y/Z: 6000mm/6400mm/2150mm, weight: approx. 13500kg.

more

Profile Hardening System

Elotherm Elomat V/M/180/3

Germany

unknown

used

on request

INNO27020

A profile hardening system (inductor) AEG-Elotherm Elomat V/N/180/3 is available. The nominal output is 200kW. The system is fully functional and is offered including various coils.

more

CNC Machining Center

Hommel Unverzagt UVA 725 Plus

Germany

2010

used

on request

INNO27008

Travel X/Y/Z: 725mm/460mm/460mm, speed: 10000rpm, tool holder: SK40, tool magazine: 24 places, max. tool diameter/length: 100mm/300mm, max. tool weight: 7kg, tool change time: 2s, table dimensions X/Y: 760mm/420mm, max. table load: 400kg. Dimensions X/Y/Z: approx. 2200mm/2100mm/2300mm, weight: approx. 3600kg, control: Heidenhain TNC 620. Defects: Compact inverter with integrated controller and PLC, door switch, both work area lamps, X-axis ball screw and roller bearings. Including chip conveyor. Documentation available. On-site inspection is possible.

more

Hydraulic Press

Wanzke HVZ 160/S

Germany

1998

used

on request

INNO26995

Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible.

more

Angular Window Machining Centre

Weinig Unicontrol 10

Germany

1998

used

on request

INNO26960

An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available.

more

Powder Coating Cabin

Gema StandardClassic

Germany

2015

used

on request

INNO26948

Inlet pressure min./max.: 6bar/10bar, recommended inlet pressure: 7bar, max. compressed air water vapor content: 1.3g/³, max. compressed air oil content: 0.1mg/kg. Max. Compressed air consumption with collection container/fluidized powder trolley: 12m³/h / 47m³/h, manual coating opening X/Y: 1300mm/1300mm, number of filter elements: 3, filter area: 29.25m². Exhaust air volume initial/working area: 3200m³/h / approx. 2650m³/h, powder capacity with collection container/fluidized powder trolley: 80l/30l, dimensions X/Y/Z: 1500mm/2758mm/2100mm. Documentation available.

more

Hydraulic Press

Dunkes HZS 125

Germany

2000

used

on request

INNO26947

Pressing force: 1250kN, closing speed: 450mm/s, working speed: 21mm/s, stroke length: 590mm, dry weight: 15000kg. The hydraulic press has a defect in the tool holder, they must be fixated with clamping claws. Documentation available. On-site inspection is possible.

more

CNC Milling Machine

Makino FNC-A20

Germany

1985

used

on request

INNO26937

Travels: 1200mm/700mm/650mm, table dimensions X/Y: 1550mm/650mm, torque: 410Nm, control: Heidenhain 426. On-site inspection is possible.

more

Multi-Spindle Lathe

Mori-say 6/32M

Germany

1997

used

on request

INNO26918

A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg.

more

CNC Lathe

Takamaz X180

Germany

2010

used

on request

INNO26917

One CNC lathe Takamaz X180 available. Turning diameter: 210mm, turning length: 230mm, spindle bore: 51mm, speed: 3500rpm, number of axes: 3, tool positions: 12, chuck size: 8inch (Kitagawa B208, 200mm), control: Fanuc 0i-TC, weight: approx. 4000kg.

more

CNC Profile Machining Center

Maka PA 37

Germany

2006

used

on request

INNO26915

Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available.

more

CNC Press Brake

Trumpf TrumaBend V170

Germany

1997

used

on request

INNO26911

Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available.

more

Multi-Spindle Lathe

Gildemeister GMC20 ONE

Germany

2010

used

on request

INNO26919

Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline.

more

Punch Press

Edel Stanzmaster 40

Germany

1985

used

on request

INNO26882

Pressing force: 400kN, throat depth: 520mm, dimensions X/Y/Z: 1800mm/1000mm/1900mm, weight: approx. 2600kg. Documentation available.

more

CNC Machining Center

Yamazaki Mazak AJV-35/60

Germany

1988

used

on request

INNO26880

Travel X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10000rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11000kg.

more

Batch Furnace System

Xerion XRetort

Germany

2015

used

on request

INNO26848

There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible.

more

Sand Blast Machine

Peenmatic 1800 SDK

Germany

2000

used

on request

INNO26817

Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available.

more

Drilling and Milling Machine

Hille/raboma/shw UE 21/SKM/BG 80

Germany

1959

used

on request

INNO26815

There are 3 old used machines without documentation available. 1x multi-spindle drilling machine Hille type: BG 80, year of manufacture: 1959. 1x NC milling machine SHW type: UE 21. 1x radial drilling machine Raboma type: SKM. All machines in working order. On-site inspection is possible.

more

All Offers / Metal processing machines