Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Metal processing machines
Broaching and slotting and drawing machines 10 Deburring machines 6 Diecasting 2 Drilling 38 Engraving machines 3 Eroding machines 27 Facing and centering machines 1 Forging attachments 2 Foundry machinery 1 Gear cutting machines 2 Grinding machines 108 Honing machines 2 Lapping machines 1 Lathes 194 Machining centers 136 Measuring machines 1 Milling machines 135 Other machinery 44 Pipe and tube working machines 11 Planing machines 1 Polishing machines 2 Presses 97 Profile processing machines 9 Roller leveller 3 Saws 57 Sheet metal working 84 Stoves 40 Surface technology 53 Threading machines 1 Tools and accessories 5 Transfer machines 11 Welding and cutting 102 Window production machines 8 Wire industry machinery 24
Innovac used-machines Metal processing machines [501 - 520 of 1221]
CNC-Circular-Grinding-Machine-Monzesi-Monza-420-200-M6 used
CNC Circular Grinding Machine
Monzesi Monza 420/200 M6
Germany
2024
used
on request
INNO31127
An almost like-new and high-precision CNC centerless grinding machine Monzesi is available. Grinding wheel outer diameter min./max.: 406mm/280mm, inner diameter: 152mm, max. width: 200mm, speed: 2100rpm, power: 11kW. Regulating wheel outer diameter min./max.: 160mm/254mm, inner diameter: 115mm, max. width: 200mm, speed: 285rpm. Workpiece diameter: 100mm, workpiece length: 200mm, regulating wheel axial adjustment: +/-10mm, taper setting: -2°/6°, tilt adjustment: +/-5°, accuracy: 0.0001mm. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/21500mm, weight: approx. 4500kg, control: CNC Fanuc 35i-B Digital, operating hours April/2026: 481h. Documentation available. An on-site inspection is possible. Expected to be available from end of July/August 2026.
more
Lathe-Martin-DS-80 used
Lathe
Martin DS 80
Germany
1966
used
on request
INNO31125
An old Martin automatic lathe is available. Center height: 355mm, turning diameter over bed/slide: 720mm/515mm, faceplate diameter: 710mm, three-jaw chuck diameter range: 250mm-500mm, crank: 980mm, swing diameter: 1030mm, bed width: 530mm, speed: 1400rpm, quill diameter: 1150mm, max. quill travel: 280mm, max. workpiece weight: approx. 4000kg, weight: approx. 4900kg. Documentation available. An on-site inspection is possible.
more
CNC-Cycle-Lathe-Unitech-UT-660x4000 used
CNC Cycle Lathe
Unitech UT 660x4000
Germany
2016
used
on request
INNO31119
Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible.
more
Cable-Processing-Machine-Ka-be-ma-AS400-T-KW-UKW-A-1,5-DWST400-1 used
Cable Processing Machine
Ka-be-ma AS400/T-KW-UKW-A-1,5/DWST400-1
Germany
2005
used
on request
INNO31109
Three cable processing machines from a complete extrusion line are available. 1) Spindle pay-off Ka-Be-Ma AS400, spool flange diameter range: 140mm-400mm, min. core diameter: 90mm, max. spool width: 300mm, max. spool weight: 50kg, conductor diameter range: 0.1mm-1mm, max. pay-off speed: 600m/min, tensile force: 0.5N-20N, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 1000kg. 2) Cooling section Ka-Be-Ma T-KW-UKW-A-1,5, Zone 1: Process: immersion cooling, temperature range: 70°C-80°C, length: 2000mm. Zone 2: Process: spray cooling/deflection section, temperature: approx. 25°C. 3) Dual take-up Ka-Be-Ma DWST400-1, spool flange diameter range: 305mm-400mm, min. core diameter: 156mm, max. spool width: 282mm, conductor diameter range: 0.1mm-1mm, speed: 600m/min, tensile force range: 0.5N-1.5N, max. spool weight: 80kg, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible.
more
Deburring-Machine-Rausch-Gratomat-500-Robot used
Deburring Machine
Rausch Gratomat 500 Robot
Germany
2014
used
on request
INNO31108
A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible.
more
Hydraulic-Frame-Press-Oevermann-ESP-150 used
Hydraulic Frame Press
Oevermann ESP 150
Germany
unknown
used
on request
INNO31104
A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.
more
CNC-Milling-Machine-Strojtos-FGS-63-NCP used
CNC Milling Machine
Strojtos FGS 63 NCP
Germany
2006
used
on request
INNO31092
Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible.
more
CNC-Vertical-Machining-Center-Bridgeport-VMX-1000-30 used
CNC Vertical Machining Center
Bridgeport VMX 1000-30
Germany
1992
used
on request
INNO31091
A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible.
more
CNC-Milling-Machine-Knuth-EcoMill-350-CNC used
CNC Milling Machine
Knuth EcoMill 350 CNC
Germany
2013
used
on request
INNO31087
A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible.
more
Band-Saw-Behringer-HBP-220-HY used
Band Saw
Behringer HBP 220-HY
Germany
1994
used
on request
INNO31082
Cutting range round material: 220mm, cutting range flat material: 350mm/220mm, cutting range rectangular material: 220mm/220mm, saw band dimensions X/Y/Z: 3720mm/27mm/1mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 2400mm/1900mm/1500mm, weight: approx. 1350kg, operating hours: approx. 1450h. The drive cylinder must be sealed. Documentation available. An on-site inspection is possible.
more
CNC-Surface-Grinding-Machine-Jung-J-630-C used
CNC Surface Grinding Machine
Jung J 630 C
Germany
1999
used
on request
INNO31081
Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible.
more
CNC-Vertical-Machining-Center-Chiron-FZ-12-L used
CNC Vertical Machining Center
Chiron FZ 12 L
Germany
1991
used
on request
INNO31076
Travel X/Y/Z: 1600mm/400mm/425mm, table dimensions X/Y: 2000mm/400mm, max. table load: 350kg, tool positions: 12, tool holder: SK30, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2800mm, weight: approx. 5000kg, control: Siemens Sinumerik. The hoses, the Y-axis cover, and the battery (data loss) are in need of repair. An on-site inspection is possible.
more
CNC-Press-Brake-Weinbrenner-GP-125 used
CNC Press Brake
Weinbrenner GP 125
Germany
1986
used
on request
INNO31075
Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible.
more
CNC-Travelling-Column-Maching-Center-Matec-30L used
CNC Travelling Column Maching Center
Matec 30L
Germany
2000
used
on request
INNO31069
Machining length X: 5000mm, machine dimensions X/Y/Z: approx. 7500mm/3500mm/3500mm, weight: approx. 14000kg, control system: Heidenhain 426, operating hours: 91758h, running hours: 36086h. Including tool changer and tool holders. Without extraction system. Documentation available. An on-site inspection is possible.
more
Cleaning-System-Mea-L160 used
Cleaning System
Mea L160
Germany
1998
used
on request
INNO31068
Basket dimensions: 1100x1100mm, usable height: 800mm, max. load weight: 700kg, spray pressure: 4.3bar, ambient temperature: 5-40°C, max. washing temperature: 90°C, material of media-contact parts: stainless steel V2A, power connection: 55A. With control cabinet and documentation. An on-site inspection is possible.
more
CNC-Lathe-Eguro-Nuclet-10A used
CNC Lathe
Eguro Nuclet-10A
Germany
1995
used
on request
INNO31066
A CNC compact turning machine Eguro is available. Turning diameter: 350mm, machining diameter: 200mm, turning length: 200mm, speed: 5000rpm, bar capacity: 1inch, travel X/Z: 250mm/250mm, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/1200mm, weight: approx. 1250kg. An on-site inspection is possible.
more
CNC-Milling-Machine-Haas-VF-3 used
CNC Milling Machine
Haas VF-3
Germany
1997
used
on request
INNO31058
A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible.
more
Welding-Cell-Kuka-genius-KR300-R2500-KR60-3-HWI408 used
Welding Cell
Kuka/genius KR300-R2500/KR60-3/HWI408
Germany
2017
used
on request
INNO31054
Two welding cells are available, each with two KUKA robots, one for workpiece handling and one for the welding process. 1) Welding process: resistance spot welding, robot: 2x KUKA KR 60-3, max. payload: 60kg, max. reach: 2033mm, repeatability: +/-0.06mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 4500h/8200h. 2) Welding process: resistance spot welding, robot: KUKA KR300 R2500, max. payload: 300kg, max. reach: 2496mm, repeatability: +/-0.6mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 2700h/6100h. Documentation available. An on-site inspection is possible. Individual sale possible.
more
CNC-Lathe-Doosan-Puma-240-MS used
CNC Lathe
Doosan Puma 240 MS
Germany
2006
used
on request
INNO31053
A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible.
more
Point-Rolling-Machine-Krollmann-Nowa-3-S used
Point-Rolling Machine
Krollmann Nowa 3/S
Germany
1991
used
on request
INNO31049
A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 3
Automation-technology 60
Beverage-filling-technology 40
Complete-production-lines 3
Construction-machinery 34
Energy-management 150
Food-processing-and-beverage 169
Material-storage 70
Materials-handling-technology 79
Measurement-and-testing 77
Medical-equipment 20
Metal-processing-machines 1221
Mining 6
Office-equipment 4
Other-machines 60
Packaging-machines 252
Pharmaceutical-and-cosmetics 17
Plastics-processing-machines 202
Printing-machines 101
Process-equipment-and-chemistry 177
Packaging-material-machinery 87
Robotics 31
Surplus-goods 5
Textile-machinery 105
Utility-vehicles 13
Woodworking-machines 102