Drilling Machine

Alzmetall Abomat 30

Germany

1982

used

on request

INNO28592

Drilling capacity: 35mm, mounting: MK4, speed: 1400 rpm, feed: 0.4mm/rev. On-site inspection is possible.

more

Cylindrical Grinding Machine

Studer RHU 1000/125-DR

Germany

1979

used

on request

INNO28591

Center height: 125mm, center width: 1025mm, longitudinal slide travel: 1020mm, table speed: 5.5m/min, rotary table tilt: 8°, workhead swivel: 90°, speed: 675rpm, 3-jaw chuck diameter: 160mm. Documentation available. On-site inspection is possible.

more

Band Saw

Mep Shark 281

Germany

unknown

used

on request

INNO28590

Cutting capacity 0°: round material: 250mm, square material: 230mm/230mm, flat material: 280mm/200mm. Cutting capacity 45°: round material: 190mm, square material: 180mm/180mm, flat material: 180mm/180mm. Cutting capacity 60°: round material: 120mm, square material: 110mm/110mm, flat material: 110mm/110mm. Sawing speed: 72m/min, saw blade dimensions X/Y/Z: 2950mm/27mm/0.9mm, weight: approx. 370kg. On-site inspection is possible.

more

Welding Fume Extraction

Teka Filtercube 4H

Germany

2014

used

on request

INNO28589

Motor power: 7.5kW, air volume flow: 8000m³/h, negative pressure: 4600Pa, filter area: 100m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 800mm/900mm/3200mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.

more

CNC Laser Cutting Machine

Bystronic ByStar Fiber 10kW

Germany

2017

used

on request

INNO28587

Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

more

Drill Grinding Machine

Haarmann HSP 50

Germany

1978

used

on request

INNO27511

Max. Drilling diameter: 40mm, grinding wheel diameter: 200mm, grinding wheel width: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1200mm/850mm/1400mm, weight: approx. 350kg. Including cooling lubricant device and 10x spare grinding wheels. Documentation available. On-site inspection is possible.

more

Band Saw

Jaespa Concept 260/630S

Germany

2010

used

on request

INNO28582

Motor power: 4kW, cutting speed: 15m-90m/min, saw blade dimensions X/Y/Z: 5150mm/13mm/0.9mm, saw blade type: M42/4ZpZ, material support height: 720mm, angle: +/-30°, machine dimensions X/Y/Z: approx. 2850mm/1400mm/1850mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

more

CNC Travelling Column Maching Center

Soraluce FL 6000

Germany

2011

used

on request

INNO28578

Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible.

more

CNC Plate Drilling Machine

Union BFP 130/7

Germany

1992

used

on request

INNO28577

A Union horizontal drilling and milling machine overhauled in 2009 is available. Spindle diameter: 130mm, tool holder: ISO30, travel X/Y: 11500mm/3000mm, column movement Z: 420mm, drilling spindle movement W: 900mm, facing slide movement U: 320mm, spindle speed: 1000rpm, face support speed: 250rpm. Feed in all axes: 2500mm/min, rapid traverse X/Y: 5000mm/min, rapid traverse Z: 3600mm/min, rapid traverse W/U: 3150mm/min, connected load: 100kW, spindle power: 50kW. Machine dimensions X/Y/Z: approx. 17000mm/3000mm/6500mm, total system weight: approx. 60t, control system: PFP 130 NC. The drives, switchgear and control system were overhauled in 2009. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025.

more

Annealing Furnace

Herdieckerhoff STE 300/1000

Germany

1986

used

on request

INNO28576

A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible.

more

Hardening Oven

Thermconcept KM 590/13

Germany

2013

used

on request

INNO28570

Inner dimensions X/Y/Z: 650mm/1500mm/600mm, outer dimensions X/Y/Z: 1500mm/3000mm/2400mm, volume: 590l, output: 50kW, maximum temperature: 1280°C, weight: approx. 1450kg. The oven shows some signs of use and a few firebricks are broken. Without pneumatic cylinder. Documentation available. On-site inspection is possible.

more

CNC Laser Cutting Machine

Trumpf TruMatic L 3003 B

Germany

1992

used

on request

INNO28569

Working range X/Y: 3000mm/1500mm, laser power: 2000W (2kW), laser type: TC L 3003, positioning accuracy: +/-25mm, min. workpiece dimensions X/Y: 1000mm/1000mm, max. workpiece weight: 530kg. Documentation available. On-site inspection is possible.

more

CNC Machining Center

Dmg Mori DMC 1035 V

Germany

2010

used

on request

INNO28568

Travel X/Y/Z: 1035mm/560mm/510mm, rapid traverse X/Y/Z: 25m/min, feed: 20m/min, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, spindle speed: 9000rpm, power: 13kW, torque: 83Nm, tool holder: SK40, tool positions: 20, max. tool diameter: 80mm/130mm, max. tool length: 300mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2500mm, weight: approx. 4100kg, control: Siemens Sinumerik 810D, operating hours: 23918h, machining hours: 11991h. Including chip conveyor, DMG EcoLine UNO 115 tool presetter, machine vices, clamping tools and various tool holders. The buffer battery is empty and may need to be replaced. Documentation available. On-site inspection is possible.

more

Cleaning System

Perkute FR 130

Germany

2006

used

on request

INNO28567

A Perkute Clean-o-mat front-loader spray cleaning system is available. Pump capacity: 7.5kW, heating capacity: 18kW, max. rotary basket load: 2000kg, max. compressed air: 10bar, empty weight: approx. 1000kg. On-site inspection is possible.

more

Glazing Press

Eder + Müller VKP-KH

Germany

2003

used

on request

INNO28549

A glazing press is available for mounting and fixing glass panes in window and door frames. Span: approx. 3750mm, drive type: pneumatic, operating pressure: 7bar. On-site inspection is possible.

more

Circular Saw

Eisele LMS II HVG-225

Germany

1980

used

on request

INNO28547

Saw blade diameter: 350mm, speed: 3400rpm, cutting capacity at 90°: 120mm/75mm, cutting capacity at 45°: 90mm/65mm, machine dimensions X/Y/Z: approx. 700mm/900mm/1000mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

more

Surface Grinding Machine

Elb-schliff SW 15 VA II

Germany

1985

used

on request

INNO28546

An old ELB surface grinding machine is available. Grinding length: 1500mm, grinding width: 450mm, workpiece height: 340mm, magnetic clamping plate X/Y: 1500mm/400mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76mm, grinding spindle speed: 2890rpm, max. table load: 700kg, machine weight: approx. 5000kg. The drive spindle of the machine must be replaced. Documentation available. On-site inspection is possible.

more

CNC Machining Center

Grob G350

Germany

2013

used

on request

INNO28537

Travel X/Y/Z: 600mm/855mm/750mm, rapid traverse X/Y/Z: 70m/45m/90m/min, tool holder: HSK 40, speed: 28000rpm, max. workpiece weight: 300kg, control: Heidenhain, machine weight: approx. 15300kg, spindle hours: approx. 6000h. Including 38bar IKZ, Blum laser probe, tools and holder. Documentation available. On-site inspection is possible.

more

CNC Universal Lathe

Mag Ias DUS 800 ti/6000

Germany

2013

used

on request

INNO28531

Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible.

more

CNC Press Brake

Fasti 940-200-40

Germany

1998

used

on request

INNO28527

Working width: 4000mm, pressing force: 2000kN, max. operating pressure: 30MPa, connected load: 22.38kW, protective distance: 156mm, holding time: 98ms. Documentation available. On-site inspection is possible.

more

All Offers / Metal processing machines