Round Bending Machine

Promau 4R 30/D

Germany

2000

used

on request

INNO31799

A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible.

more

Winding Machine

Mag ASW 50-3FK

Germany

1987

used

on request

INNO31796

A roll material processing machine MAG is offered. Min./max. material width: approx. 5mm/50mm, material thickness range: approx. 0.05mm to 1.5mm, reel mandrel diameter: 76mm, usable mandrel length: approx. 60mm, max. roll outer diameter: approx. 300mm, guide roller diameter: approx. 40mm, material guide track width: approx. 50.5mm. Inspection possible by prior arrangement.

more

Cleaning System

Ama Universal Multimatic LM 150

Germany

1993

used

on request

INNO31794

A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible.

more

Roll Forming Machine

Wmw LP 04

Germany

1978

used

on request

INNO31793

A roll forming line by Instytut Obróbki Plastycznej (Poland) for plastic metal forming is available. Roll stations: 12, shaft diameter: 50mm, max. profile width: 300mm, max. profile thickness: 2mm, overall system dimensions X/Y: approx. 20m/4m. Including an automatic cut-off unit with an incremental length measuring system and a payoff reel. An on-site inspection is possible.

more

Bell Furnace

Elektro-höhn Gmbh MHV-3500

Germany

2005

used

on request

INNO31790

The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible.

more

CNC Tool Grinding Machine

Schneeberger Corvus GDS 650

Germany

2017

used

on request

INNO31787

A Schneeberger CNC 5-axis tool grinding machine is available. 1) Schneeberger Corvus GDS 650 turning machine, year of manufacture: 2017, grinding spindle interface: HSK80, grinding spindle power: 26kW/32kW, max. A-axis swing: 700mm, software: Quinto5.4.6, spindle hours: approx. 10400h. Including extensive accessories, Zeno precision 3D coordinate probe, quick clamping with tailstock, electrostatic extraction system, fire protection system, double grinding wheel capacity, integrated measurement and documentation. 2) Vomat FA 120EKSd filtration system, year of manufacture: 2016, filtration capacity: 120l/min, filling capacity: 500l, filtration fineness: 5µm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, weight: approx. 500kg. 3) Vomat HSSV3 filter module, year of manufacture: 2016, max. filling capacity: 350l, max. filtration capacity: 120l/min, operating pressure range: 6bar-10bar. 4) Hyfra Sigma 7-S cooling unit, year of manufacture: 2017, cooling capacity at 32°C: 6900W, max. operating pressure: 42bar, refrigerant quantity: 1.1kg, refrigerant: R410A, weight: approx. 170kg. Documentation available. An on-site inspection is possible.

more

Universal Circular Grinding Machine

Tacchella 612 UN

Germany

2021

used

on request

INNO31781

A universal external and internal cylindrical grinding machine Tachella, refurbished in 2021, is available. Center distance: 600mm, center height: 120mm, max. grinding diameter: 240mm, max. grinding length: 600mm, X/Z travel: 600mm/250mm, max. workpiece weight: 100kg/40kg. Machine dimensions X/Y/Z: approx. 2700mm/1900mm/1700mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.

more

Plasma Cutter

Kjellberg Finsterwalde FineFocus 800

Germany

2008

used

on request

INNO31780

Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible.

more

CNC Lathe

Emco Turn E25

Germany

2007

used

on request

INNO31779

A CNC short-bed turning machine Emco is available. Travel X/Z: 100mm/300mm, max. turning diameter: 85mm, max. swing diameter: 250mm, max. turning length: 255mm, center distance: 405mm, max. bar capacity: 25.5mm, spindle bore: 30mm, spindle speed: 6300rpm, tool stations: 12, tool interface: VDI16, rapid traverse: 15m/min. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/1850mm, weight: approx. 1400kg, control: Siemens Sinumerik 810D, operating hours: approx. 27000h, spindle hours: approx. 11000h. Including bar feeder. The spindle was replaced in 2021 at approx. 25000 operating hours. Documentation available. An on-site inspection is possible.

more

CNC Vertical Machining Center

Dmg Mori DMC 835 V

Germany

2009

used

on request

INNO31778

A vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, table dimensions X/Y: 1000mm/560mm, max. table load: 800kg, tool holder: SK40, spindle speed: 10000rpm, tool stations: 30, rapid traverse: 30m/min, positioning accuracy: +/-0.008mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 3700mm/2450mm/2750mm, weight: approx. 4100kg, control: Heidenhain iTNC530, operating hours: approx. 16000h, spindle hours: approx. 8000h. Including chip cart, chip conveyor and belt filter. Documentation available. An on-site inspection is possible.

more

CNC Machining Center

Metrom PG 2000

Germany

2007

used

on request

INNO31773

A CNC 5-axis pentapod machining center Metrom is available. Axes: 5, Travel X/Y/Z/V: 1600mm/2800mm/1000mm/3200mm, A-axis swivel: 90°, Table dimensions X/Y: 1600mm/1800mm, Tool interface: HSK63, Speed: 15000rpm, Spindle power: 25kW/32kW. Machine dimensions X/Y/Z: approx. 6500mm/4000mm/4500mm, Weight: approx. 14000kg, Control: Andronic 2060. Including enlarged worktable, coolant system with 200l tank, Blum TC 50 3-D touch probe, additional holder and milling spindle. Documentation available. An on-site inspection is possible.

more

CNC Machining Center

Hedelius BC60

Germany

1998

used

on request

INNO31772

A Hedelius CNC 3-axis machining center is available. Travel X/Y/Z: 2490mm/630mm/750mm, table dimensions X/Y: 3200mm/650mm, tool holder: SK40, spindle speed: 8000rpm, tool positions: 48, coolant tank volume: 350l. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3700mm, weight: approx. 16500kg, control: Heidenhain TNC426. Including coolant tank, divided working area, chip conveyor and through-tool coolant. Documentation available. An on-site inspection is possible.

more

CNC EDM-Machine

Agie Agiecut Excellence 3

Germany

2002

used

on request

INNO31771

Travel X/Y/Z: 500mm/3590mm/250mm, wire diameter range: 0.15mm-0.3mm, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight: 400kg/800kg, max. taper: 30°/100mm, wire speed: 300mm/s, max. surface quality: Ra 0.1µm. Machine dimensions X/Y/Z: approx. 2800mm/2400mm/2250mm, weight: approx. 4500kg, control: Agie, operating hours: approx. 151182h. Documentation available. An on-site inspection is possible. The image is an example.

more

CNC Universal Lathe

Traub TNA 400

Germany

2002

used

on request

INNO31770

A relatively lightly used Traub CNC universal lathe is available. Spindle bore: 82mm, max. chuck diameter: 315mm, turning length: 750mm, X/Z travel: 360mm/750mm, Z-axis travel: +/-60mm, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 3250mm/1900mm/2300mm, weight: approx. 7800kg, operating hours: approx. 21812h. Documentation available. An on-site inspection is possible. The image is for reference only.

more

Cleaning System

Mafac Elba

Germany

2023

used

on request

INNO31769

A Mafac two-tank spray flood cleaning machine is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, tank volume 1/2: 425l/300l, machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 1000kg, operating hours: 4531h. Documentation available. An on-site inspection is possible.

more

PVD Coating System

Platit Pi111 Plus G3

Germany

2023

used

on request

INNO31766

A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible.

more

Drag Finishing Machine

Tinkap Pardus 2H12T-R

Germany

2015

used

on request

INNO31764

One Tinkap drag finishing machine is available. Tools: 12/cycle, Throughput: approx. 144tools/h, Clamping range: 42mm, Max. tool length: 250mm, Processing heads: 2, Tool holders: 2x6. Documentation available. An on-site inspection is possible.

more

Fine Filtration System

Vomat FA120 EKS

Germany

2019

used

on request

INNO31762

A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process and a cooling unit is available. Filtration capacity: 240l/min, Filtration fineness: 3µm-5µm, Filling capacity: 500l, Machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible.

more

Planing Machine

Cleveland GAPU-5

Germany

2024

used

on request

INNO31761

A Cleveland dressing and profiling machine for machining diamond and CBN grinding wheels is available. Dressing process: dry, max. single wheel dimensions X/Y: 400mm/30mm, max. wheel package dimensions X/Y: 150mm/150mm, grinding spindle diameter: 80mm, wheel flange bore: 32mm. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/2000mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible.

more

CNC Tool Grinding Machine

Ewag Rotoline

Germany

2007

used

on request

INNO31759

A CNC tool grinding machine Ewag for rotationally symmetrical tools is available. Travel X/Y/Z: 460mm/190mm/730mm, Rapid traverse: 6m/min, Max. tool length: 500mm, Spindle interface: ISO50. Machine dimensions X/Y/Z: approx. 3300mm/2300mm/2500mm, Weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

more

All Offers / Metal processing machines