Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1 - 20 of 2475]

Multistage Press

Hatebur BKA 2

Germany

1990

used

on request

INNO29147

A Hatebur cold former for wire processing is available. Wire diameter range: 6mm-14mm, dies: 4, steps: 5, cutting length: 125mm, underhead shank length: 15mm-102mm, max. width across flats: 17mm, production speed: 120 pieces/min, pressing force: 100t, machine weight: approx. 12000kg. An on-site inspection is possible.

Belt Conveyor

Germany

unknown

used

on request

INNO29146

A waterproof trough conveyor belt, therefore well suited for wet goods such as a food washing system (vegetables/fruit), is available. Material: stainless steel, belt width: 370mm, trough width: 400mm, trough height: 150mm, total length: 12300mm, total width range: 500mm-600mm. Without motor. Documentation available. On-site inspection is possible.

Belt Conveyor

Stöber K21R 90 S4 TLB 960

Germany

unknown

used

on request

INNO29145

An Intralox belt, buffer table and Stöber conveyor belt are available. Belt width: approx. 1150mm, belt length: approx. 4900mm, frame material: stainless steel. Including 4 belts. Documentation available.

Stenter Frame

Brückner

Germany

1986

used

on request

INNO29144

A Brückner stenter frame, perfectly suited as a spare parts dispenser, is available. Steam pressure: 2 bar, air pressure: 10 bar. On-site inspection is possible.

Injection Moulding Machine

Boy 22 SVV dipronic

Germany

1987

used

on request

INNO29143

A small Boy injection molding machine is available. Clamping force: 220kN, tie bar dimensions X/Y: 254mm/254mm, max. platen distance: 400mm, min. installation height: 200mm, opening stroke: 200mm, ejector stroke: 80mm. Screw diameter: 24mm, injection volume: 36cm³, injection weight: 32g, injection pressure: 1455bar. Machine dimensions X/Y/Z: 1800mm/1000mm/2600mm, weight: approx. 750kg, control: Dipronic. On-site inspection is possible.

Counting Machine

Mtf/lauper MR-S1/LQ 100

Germany

2017

used

on request

INNO29142

A total of three counting and distribution machines are available for filling containers (pouches) to the exact number of pieces. 1) MTF Technik MR-S1, year of manufacture: 2017. 2-3) Two identical Lauper LQ 100, year of manufacture: 2007, control: IT 9000. Documentation available. On-site inspection is possible.

Belt Conveyor

Dmg Mori B-F7003

Germany

unknown

used

on request

INNO29141

A chip conveyor for DMG Mori machines is available. Without pump and skimmer. Approximately half of the rails for further transportation are defective. Documentation available. On-site inspection is possible.

3D Printer

Ultimaker S5

Germany

2018

used

on request

INNO29140

A total of 10 (ten) Ultimaker 3D printers including material stations are available. Printing technology: Fused Deposition Modeling (FDM), extruder: dual extrusion with automatic nozzle lift system and exchangeable print cores (AA/BB), nozzle diameter: 0.25mm/0.4mm/0.8mm, build space dimensions X/Y/Z: 330mm/240mm/300mm. Layer resolution: 0.25mm nozzle: 60µm-150µm, 0.4mm nozzle: 20µm-200µm, 0.8mm nozzle: 20µm-600µm, filament diameter: 2.85mm, print bed temperature range: 20°C-140°C. Materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway and other third-party materials. Documentation available. On-site inspection is possible. Only package sale possible.

Remaining Stock

Elumatec/graule/eisele AF/AS/ZS 170N/Pressta 2000

Germany

2009

used

on request

INNO29139

A total of five metal and profile processing machines from various manufacturers are available. 1) End milling machine Elumatec AF, year of manufacture: 2003, max. milling range: 400mm, max. tool diameter: 280mm, milling cutter bore: 40mm, max. profile height: 165mm, max. milling height: 140mm, max. milling depth: 110mm, max. milling length: 400mm, speed: 2800/min, stroke: 550mm. Machine dimensions X/Y/Z: approx. 1550mm/900mm/1000mm, weight: approx. 250kg. 2) End milling machine Elumatec AF, year of manufacture: 2011, max. milling range: 400mm, max. tool diameter: 280mm, milling cutter bore: 40mm, max. profile height: 165mm, max. milling height: 140mm, max. milling depth: 110mm, max. milling length: 400mm, speed: 2800/min, stroke: 550mm. Machine dimensions X/Y/Z: approx. 1550mm/900mm/1000mm, weight: approx. 250kg. 3) Single-spindle copy router Elumatec AS, year of manufacture: 2011, travel X/Y/Z: 230mm/90mm/110mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 600mm/550mm/1300mm, weight: approx. 120kg. 4) Mitre circular saw Graule ZS 170N, year of manufacture: 1998, saw blade diameter: 420mm, saw blade bore: 40mm, saw blade speed: 3350rpm, dust extraction nozzle diameter: 95mm. Cutting width and height at 90°: 410mm/170mm, cutting width and height at 45°: 290mm/115mm. 5) Corner press Eisele Pressta 2000, year of manufacture: 2009, pressing force: 32kN, punching stroke: 17mm, max. installation height: 150mm, max. profile height: 210mm, operating pressure: 6bar, machine dimensions X/Y/Z: approx. 900mm/1200mm/750mm. Documentation available. On-site inspection is possible.

Factory Scooter

Isel Euro-Scooter II LR ES 175

Germany

2018

used

on request

INNO29138

An electric scooter is available for transporting personnel in warehouses, logistics centers, production halls and the like. Motor power: 1kW, max. forward/reverse speed: 15km/6km/h, charging time: approx. 5h, range: 40km, machine dimensions X/Y/Z: approx. 1750mm/800mm/1550mm, unladen weight: approx. 123kg, max. total weight: approx. 250kg. Documentation available. On-site inspection is possible.

CNC Punching Machine

Amada EMK 3610 NT/MP300 M

Germany

2007

used

on request

INNO29137

An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible.

Remaining Stock

Brehmer/guk/l&m ST/FA/STV 1200

Germany

2018

used

on request

INNO29136

Various machines from a print shop are available. 1) Saddle stitcher Brehmer ST 300, year of manufacture: 1999, with 6 stations, UFA and trimmer. Including extensive spare parts. 2) GUK FA 36-4 buckle plate folder, year of manufacture: 1998, with SAF. Including extensive spare parts. 3) Buckle plate folding machine GUK FA 52/4-4K, year of manufacture: 1988, with 4-pocket cross-fold unit. Including extensive spare parts. 4) Universal eyelet stitching head Hohner 52/8 S, factory overhauled. 5) Theisen & Bonitz TB-Sprint 325 VP gathering machine, year of manufacture: 1991, with 25 stations. 6) Ludden & Mennekes STV 1200 compaction system, year of manufacture: 2018. 7) Nagel Multinak S booklet and block stitching machine. 8) Affeldt SA 12 film sealing machine, year of manufacture: 1994, including 2 pallets of film. Control defective. 9) RIMA RS-10S compensating stacker with delivery belt. 10) Strapex STF automatic package strapping machine, year of manufacture: 2002. 11) Cyclop GL215 pallet film wrapper, semi-automatic with turntable. 12) Dürselen PB 01 paper drilling machine, year of manufacture: 1993, with 4 spindles. 13) Grafotec Lega 30/55 press stack delivery, year of manufacture: 1991. 14) RIMA System RS 220 corner deflector, suitable for cannibalization, part of the control system missing. 15) IBICO EPK-21 plastic spiral binding machine. 16) Habasit PT-103/8 belt hot-pressing device, new and in original packaging. 17) Regu Binder pleating belt machine. Including pleating belt. 18) Self-made roll unwinder, solid construction. 19) Perforating machine from E. Bickel. On-site inspection is possible. Only a package sale is possible.

Winding Machine

Sahm 400E

Germany

1999

used

on request

INNO29135

A Sahm parallel winder is available. Spindle positions/winding positions: 104, traverse length: approx. 300mm, bobbin core holder: approx. 50mm. On-site inspection is possible.

Cyclone Sieving Machine

Azo DA 350

Germany

2004

used

on request

INNO29134

An AZO cyclone filter machine including drive is available. Screen baskets: 2, screen basket mesh size: 2mm/4mm. Documentation available. On-site inspection is possible.

CNC Press Brake

Hämmerle BM 200-3100

Germany

1998

used

on request

INNO29133

Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible.

Rod Magazine Feeder

Siemens PL EA 1

Germany

unknown

used

on request

INNO29132

Various spare parts are available for bar feeders that are used in SMD assembly lines to feed electronic components. 1-2) 2x Siemens PL EA 1 type 3 bar magazine feeders. 3-7) 5x Siemens PL EA type 3 bar magazine feeders. 8-11) 4x adapters for X-series feeder modules. The units are approx. 10 years old. Documentation available. On-site inspection is possible.

Vibratory Feeder

Fuji 2UDLFY000100

Germany

2023

used

on request

INNO29131

A vibratory stick feeder from FUJI for feeding electronic components in stick magazines is available. The device was repaired and calibrated in 2023. Accessories included. Documentation available.

CNC Double Spindle Lathe

Mazak SQT-18MS-Y2

Germany

1996

used

on request

INNO29130

A CNC lathe from Mazak's Super Quick Turn series is available. Travel X/Y/Z: 180mm/100mm/620mm, spindle speed: 3000rpm, tool holder: VDI40, tool positions: 12, axes: 5, machine dimensions X/Y: approx. 3200mm/1800mm, weight: approx. 6000kg, control: Mazatrol T Plus. Documentation available. On-site inspection is possible. Presumably there is a card error, as the machine runs irregularly.

Cold Rolling Machine

Grob ZRM e9

Germany

1984

used

on request

INNO29129

A Grob cold rolling machine modernized in 2012 is available. Workpiece diameter: 470mm, workpiece length: 1650mm, max. gearing length: 1100mm, max. gearing diameter: 120mm, continuous number of teeth: 12-96, interrupted number of teeth: 10-30, work feed range: 40mm-240mm/min, rapid traverse: 10m/min, total power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 4250mm/2050mm/1450mm, weight: approx. 8500kg, control: Siemens S7, control panel: MP277, feed drive: Siemens Sinamics 120, including various accessories such as collets, centers and wrenches. Modernization took place in 2012. Documentation available. On-site inspection is possible.

Stainless Steel Container

Germany

unknown

used

on request

INNO29128

A total of 15 (15x) stackable IBC containers for bulk goods are available. The containers were used in the food industry for the storage of spices, but have no foreign odor. Volume: approx. 750l, steel type: stainless steel 1.4301, mandrel lid diameter: 400mm, drain disk valve: DN 250, container dimensions X/Y/Z: approx. 1200mm/1000mm/1450mm. On-site inspection is possible.