Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Woodworking machines
Coating machines 1 Combined machines 1 Conveying machinery 1 Door manufacturing machinery 2 Double end tenoner 2 Drilling machines 2 Drying 5 Edge bending machines 4 Filter systems 2 Glue coating machines 3 Joinery machines 1 Lacquering 6 Milling 5 Other machinery 8 Planers 6 Presses 8 Processing machines 10 Sanders 12 Sawmills 3 Saws 20 Turnery machinery 1 Veneer fabrication 6 Wood shredder 2
Innovac used-machines Woodworking machines [21 - 40 of 111]
Spraying-Plant-Venjakob-HGS-Z-PC used
Spraying Plant
Venjakob HGS-Z/PC
Germany
1998
used
on request
INNO31802
An automatic Venjakob flat surface spray coating system is available. Coating material: water-based coating, working width: 1300mm, max. passage height: 70mm, working height range: 880mm-920mm, min. workpiece dimensions X/Y: 100mm/200mm, max. workpiece dimensions X/Y: 1200mm/3000mm, max. coating material pressure: 200bar, working speed: 3m/min. An on-site inspection is possible.
more
Drum-Chipper-Vecoplan-VTH-85-20-3-VU used
Drum Chipper
Vecoplan VTH 85/20/3 VU
Germany
2006
used
on request
INNO31726
A robust wood shredder is offered. Infeed width: 850mm, drive power: 90kW, rotor type: U-rotor, number of knife crowns: 45, motor speed: 1480rpm, control system: PLC. Equipped with control cabinet, U-rotor with 45 knife crowns, Holtec vibrating conveyor trough type DS 750 X/Y: 750mm/18500mm. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3800mm/1700mm/1400mm. Inspection possible by appointment.
more
Sawmill-Baljer-and-Zembrod-linck-vollmer-Asterix-U-71-CNE used
Sawmill
Baljer & Zembrod/linck/vollmer Asterix/U 71/CNE
Germany
1998
used
on request
INNO31706
A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible.
more
Veneer-Press-Siemens-K2012 used
Veneer Press
Siemens K2012
Germany
1964
used
on request
INNO31701
A Siemens high-frequency veneer and gluing press is available. Pressing force: 100t, high-frequency power: 6kW, press area X/Y: 2000mm/1200mm. An on-site inspection is possible.
more
Double-End-Profiler-Ima-FBA-II-260 used
Double-End Profiler
Ima FBA/II/260
Germany
1985
used
on request
INNO31651
An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.
more
Automatic-Profile-Machining-Center-Urban-AP-6500-F used
Automatic Profile Machining Center
Urban AP 6500 F
Germany
2012
used
on request
INNO31617
Machining length: 6500mm, equipment: fencing, control cabinet, Hagen & Göbel spindle unit, power: 5.5kW S1/7.9kW S6, speed range: 100 to 6000/min continuously variable, tool holder: SK30/DIN69871 form A, drilling capacity in steel 60/aluminium: 18/20mm, thread in steel 60/aluminium: M14/M16, spindle throat: 150mm, vertically opening protective cabin, pneumatically movable up and down, operation via push button, coolant system emulsion AP3000/6500, delivery rate: 70l/min, tank capacity: 150l, support table with T slot strips size 16, ten clamping cylinders, support surface: 6500x330mm, equipped with ten double acting pneumatic cylinders (50x40), tool changer plate magazine, travelling plate magazine for eight tools, change time: approx. 8 to 10s, max. tool holder diameter: 50mm, max. length for tool holder with tool: 250mm, Heidenhain HR130 handwheel integrated in control housing, chip tray, 6 removable chip drawers, pendulum operation for normal table, protection by light barrier, device for efficient production of series parts, machine table with separating discs for 900mm safety zone, spray mist device, tank capacity: approx. 1l, laser technology, retrofit AP6500 HK laser technology. Control: HEIDENHAIN iTNC530, length: 8000mm, width: 2400mm, height: 2450mm, weight: 4.5t, with documentation. An on site inspection is possible.
more
Wood-Drying-Machine-Mühlböck-MB-4000 used
Wood Drying Machine
Mühlböck MB 4000
Germany
unknown
used
on request
INNO31517
Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible.
more
Cabinet-Clamp-Pritelli-Engineering-PE-83 used
Cabinet Clamp
Pritelli Engineering PE 83
Germany
1985
used
on request
INNO31338
A continuous cabinet press Pritelli is available. Press length: approx. 2500mm, press height: approx. 1300mm, press depth: approx. 680mm, pressure shoes vertical horizontal: 2/3, rated power: 7kW. Machine dimensions X/Y/Z: approx. 7000mm/2400mm/2950mm, weight: approx. 2800kg. An on-site inspection is possible.
more
Circular-Table-Saw-Holzmann-TS-400Z used
Circular Table Saw
Holzmann TS 400Z
Germany
2021
used
on request
INNO31260
A Holzmann table saw including an outrigger for carpentry operation is available. Blade speed: 2800rpm, turntable rotation: 90°, blade adjustment: 45°, motor power S1/S6: 2800W/4200W, table height: 845mm, table dimensions X/Y: 715mm/945mm, max. cutting height 45°/90°: 90mm/120mm. Machine dimensions X/Y/Z: approx. 1350mm/1100mm/1200mm, weight: approx. 150kg. Documentation available. An on-site inspection is possible.
more
Molding-Press-Italpresse-GL-14-6-180 used
Molding Press
Italpresse GL 14-6/180
Germany
2007
used
on request
INNO31178
A heated plate press Italpresse is available. Press force: 180t, max. hydraulic pressure: 600bar, cylinder stroke: 325mm, opening: 325mm, max. temperature: 300°C. An on-site inspection is possible.
more
Molding-Press-Italpresse-BG-660 used
Molding Press
Italpresse BG/660
Germany
unknown
used
on request
INNO31099
A heated platen forming press Italpresse in bottom piston design is available. Press force: 660t, platen dimensions X/Y: 1900mm/1600mm, heating power: 31kW, connected load: 108kW, rapid stroke cylinder diameter: 70mm, weight: approx. 28000kg. Documentation available. An on-site inspection is possible.
more
Sawmill-Costa-esterer-zeno-zimac-Leonard-WD-HD30 used
Sawmill
Costa/esterer/zeno/zimac Leonard/WD/HD30
Germany
1993
used
on request
INNO31090
Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible.
more
CNC-Woodworking-Machines-Homag-PROFI-BMG512-74-15-F-A used
CNC Woodworking Machines
Homag PROFI BMG512/74/15/F/A
Germany
2014
used
on request
INNO30977
A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible.
more
Dowel-Drilling-Machine-Ganomat-DS-75 used
Dowel Drilling Machine
Ganomat DS-75
Germany
1991
used
on request
INNO30956
Drilling depth: 60mm, min. workpiece width: 800mm, max. workpiece length: 2500mm, workpiece height range: 10mm-60mm, machine dimensions X/Y: 1400mm/1400mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible.
more
Lifting-Device-Schmalz-Jumbo-65 used
Lifting Device
Schmalz Jumbo 65
Germany
2000
used
on request
INNO30955
A Schmalz vacuum hose lifter is available: load capacity: 65kg, load capacity at 90°: 40kg, lifting hose diameter: 160mm, max. lifting speed: 60m/min, lifting height: 1700mm. An on-site inspection is possible.
more
Edge-Grinding-Machine-Langzauner-BK-3-4 used
Edge Grinding Machine
Langzauner BK 3/4
Germany
1999
used
on request
INNO30948
Table dimensions X/Y: 1000mm/350mm, grinding belt length: 2600mm, grinding belt width: 150mm, belt speed: 20m/min, grinding beam swivel range: 90°, machine dimensions X/Y: 1650mm/900mm, weight: approx. 300kg. An inspection on site is possible.
more
Veneer-Jointing-Machine-Scheer-FM-18-3100 used
Veneer Jointing Machine
Scheer FM 18-3100
Germany
1995
used
on request
INNO30947
A veneer jointing and fine cut sawing machine Scheer is available. Cutting length: 3100mm, cutting height: 45mm, max. saw blade diameter: 180mm, pressure beam opening height: 80mm, fence depth: 500mm, machine dimensions X/Y/Z: approx. 3750mm/1400mm/1300mm, weight: approx. 500kg. An on site inspection is possible.
more
Wide-Belt-Sander-Sandingmaster-SCSB2-1100 used
Wide Belt Sander
Sandingmaster SCSB2-1100
Germany
unknown
used
on request
INNO30946
A two-unit sanding machine Sandingmaster is available. Working width: 1100mm, max. workpiece width: 1000mm, max. workpiece height: 150mm, sanding belt dimensions X/Y: 1130mm/1900mm, feed: 14m/min. Machine dimensions X/Y/Z: approx. 3150mm/1500mm/1900mm, weight: approx. 2500kg. Including approximately 50 sanding belts with different crownings. Documentation available. An on-site inspection is possible.
more
Panel-Saw-Scheer-PA-4137 used
Panel Saw
Scheer PA 4137
Germany
unknown
used
on request
INNO30944
A panel dividing saw Scheer & Cie is available. Cutting length: 4200mm, fence depth: 4250mm, table length: 4200mm, max. cutting height: 70mm, height levels: 3, feed rate: 40m/min, return speed: 50m/min, angular pressure device: 2400mm, air cushion tables: 3, air cushion table dimensions X/Y: 1720mm/800mm, clamping fingers: 7, saw motor power: 9kW, control: Siemens PLC, system: Linux Ubuntu with graphical interface. Including adjustable scoring saw, residual cut device, safety devices, remote maintenance, optimization program Optimax and freely adjustable labels that are printed during sawing. Documentation available. An on site inspection is possible.
more
Vibratory-Finishing-Trough-Trowal-V-500-L used
Vibratory Finishing Trough
Trowal V 500 L
Germany
1974
used
on request
INNO30911
A vibratory finishing trough Trowal for the aging of parquet strips is available. Maximum product length: 2400mm. An on-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 4
Automation-technology 66
Beverage-filling-technology 41
Complete-production-lines 2
Construction-machinery 33
Energy-management 153
Food-processing-and-beverage 165
Material-storage 69
Materials-handling-technology 80
Measurement-and-testing 81
Medical-equipment 16
Metal-processing-machines 1240
Mining 6
Office-equipment 3
Other-machines 62
Packaging-machines 253
Pharmaceutical-and-cosmetics 15
Plastics-processing-machines 189
Printing-machines 96
Process-equipment-and-chemistry 177
Packaging-material-machinery 88
Robotics 36
Surplus-goods 5
Textile-machinery 97
Utility-vehicles 13
Woodworking-machines 111