Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1 - 20 of 2480]

Part Handling

Dmg Mori WH 10

Germany

unknown

used

on request

INNO29169

A DMG Automation robot automation cell is available. Interior dimensions X/Y: approx. 700mm/1050mm, max. workpiece weight: 10kg, max. workpiece dimensions X/Y: 150mm/120mm, positioning accuracy: +/-0.1mm, robot axes: 6, robot controller: Kuka KR C 2. Documentation available. On-site inspection is possible.

Turret Lathe

Schiess 16K 1000

Germany

1938

used

on request

INNO29168

A Schiess large-format carousel vertical lathe overhauled in 2008 is available. Number of rams: 2, ram position: left and right, accuracy X/Z per workpiece meter: 0.2mm/0.2mm, min. workpiece inside diameter: 800mm, max. workpiece diameter: 10300mm, max. workpiece height: 4500mm, facing diameter: 9582mm, max. workpiece weight: 100t, control: NC. The left ram is currently dismantled. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025.

Bale Press

Hsm V-Press 825 plus pro

Germany

2015

used

on request

INNO29167

Press force: 250kN, drive power: 4kW, max. bale weight: 280kg, max. bale dimensions X/Y/Z: 1200mm/780mm/700mm, filling opening X/Y: 1195mm/540mm, cycle time: approx. 35s, torsion control system: available. Documentation available. On-site inspection is possible.

Labelling Machine

Sonderbau

Germany

unknown

used

on request

INNO29166

A labeling machine in a special design is available. It can apply a continuous label to the top and sides, for example for jams, honey jars and more. The machine has never been used. Documentation available. On-site inspection is possible.

CNC Machining Center

Deckel Maho DMU 70 Evolution

Germany

2003

used

on request

INNO29165

Travel X/Y/Z: 750mm/600mm/520mm, rapid traverse X/Y/Z: 50m/min, feed force X/Y/Z: 6kN/6kN/9kN, speed: 18000rpm, torque: 130Nm/87Nm, spindle power: 35kW/25kW. Tool places: 60, clamping area X/Y: 700mm/500mm, max. table load: 350kg. Control: Heidenhain iTNC530, operating hours: 65440h, spindle hours: 20105h. Including chip conveyor, cooling lubricant system and WHG tub. Documentation available. On-site inspection is possible.

Particle Size and Zeta Potential Analyzer

Malvern ZEN 2600

Germany

2013

used

on request

INNO29164

A measuring device for the characterization of particles, emulsions, colloids and biomolecules in liquids is available. Laser power: 4mW, wavelength: 632.8nm, primary measurement function: zeta potential measurement, particle size measurement range: 3.8nm-100µm, software compatibility: Zetasizer v8.01 with GAMP5 conformity. Zeta potential measuring range: +/-500mV, measuring principle: DLS and laser Doppler electrophoresis, min. sample volume: 12µL, measuring angle range: 13°-173°. Machine dimensions X/Y/Z: approx. 500mm/300mm/240mm, weight: approx. 15kg. Including 2x used and 1x brand new flasks. The machine was serviced in 2024. Documentation available. On-site inspection is possible.

Thermoforming Machine

Adolf Illig RDM 37

Germany

1965

used

on request

INNO29163

Form dimensions X/Y: 475mm/250mm, max. material width: 495mm, max. infeed length: 280mm, max. negative draw depth: 100mm, max. roll diameter: 1200mm, max. material thickness: 2.3mm, max. cycle output: 48 cycles/min, forming output: approx. 6500 cups/min, machine dimensions X/Y/Z: approx. 5500mm/2200mm/2100mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Skin and Blister Packaging Machine

Adolf Illig SB 53 b-1

Germany

1978

used

on request

INNO29162

Two Illig skin and blister packaging machines are available. Form dimensions X/Y: 350mm/500mm, clamping frame dimensions X/Y: approx. 400mm/540mm, max. drawing depth: 200mm, heating capacity: 4.7kW. Documentation available. On-site inspection is possible.

Thermoform System

Adolf Illig RDKP 54

Germany

1975

used

on request

INNO29161

An Illig thermoforming machine is available. Form dimensions X/Y: 500mm/380mm, max. film width: 540mm, draw depth range: -120mm/+120mm, max. feed length: 360mm, cycle rate: 30 cycles/min, punching area X/Y: 500mm/390mm, punching force: 50000daN, machine dimensions X/Y/Z: approx. 4500mm/2200mm/2200mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

Thermoforming Machine

Adolf Illig UA 100 EDH

Germany

1971

used

on request

INNO29160

A universal Illig double-stroke thermoforming machine is available. Form dimensions X/Y: 960mm/560mm, max. drawing depth: 280mm, max. panel dimensions X/Y: 960mm/560mm, motor power: 1.5kW, heating power: 16.3kW, heating zones: top and bottom. On-site inspection is possible.

Punch Press

Illig ZSM 90

Germany

1976

used

on request

INNO29159

Three Illig punching machines are available for the precise punching of thermoformed plastic parts from film material. Working width: approx. 900mm, working height: approx. 120mm, roller diameter: approx. 196mm, machine dimensions X/Y/Z: approx. 2500mm/1300mm/1600mm, weight: approx. 750kg. Including two hydraulic punching machines Wolf EHPT 6E and two manual swivel arm punching machines. On-site inspection is possible.

Hammer Mill

Rematec RPM 650/K20.0

Germany

2020

used

on request

INNO29158

A Rematec hammer mill as good as new is available. Engine type: AlphaOne OMT-1-280M4, engine power: 108kW, engine speed: 1785rpm. Documentation available. On-site inspection is possible.

Vacuum Deep-Drawing Machine

Geiss T8 DU

Germany

2008

used

on request

INNO29157

A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible.

CNC Milling Machine

Geiss ECO FZ

Germany

2008

used

on request

INNO29156

A 5-axis CNC milling machine Geiss with full encapsulation is available. Travel X/Y/Z: 2500mm/2200mm/760mm, tool holder: ER25, spindle power: 11kW, milling head type: orthogonal milling head, control: Siemens Sinumerik 840 Di solution line. Documentation available. On-site inspection is possible.

Compressor

Atlas Copco GA30VSD+FF

Germany

2014

used

on request

INNO29155

Two identical Atlas Copco compressors are available. Volume flow: 5.87m³/min, power requirement: 39.66kW, speed: 7300rpm, oil capacity: 20l, operating hours: approx. 50000h. Documentation available. On-site inspection is possible.

CNC Lathe

Gildemeister MDW 33 x 2000

Germany

1981

used

on request

INNO29154

An older CNC lathe Gildemeister is available. Turning diameter: 650mm, turning length: 2000mm, control: Siemens EPM, operating hours: 73347h. Including one steady rest and one tailstock. The steady rest has a crack. Documentation available. On-site inspection is possible.

Dough Rolling Machine

New Dell TFL 610

Germany

2025

used

on request

INNO29153

A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.

CNC Glass Processing Machine

Mdi MP500-CE

Germany

2009

used

on request

INNO29151

A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.

Skimmed Milk Steamer

Msr

Germany

1967

used

on request

INNO29150

A plant for the production of skimmed milk is available. Production capacity: 15000l/h, evaporation ratio: 65%, connected load: 90kW, control: Siemens S7, control year: 2006, including a cooling tower from 2020, documentation available. On-site inspection is possible.

CNC Circular Grinding Machine

Rollomatic RPG

Germany

2015

used

on request

INNO29149

A hydraulically operated Rollomatic precision plunge-cut grinding machine is available. Grinding process: cylindrical plunge grinding, workpiece diameter range: 0.2mm-6.35mm, shank diameter range: 1mm-6.35mm, total workpiece length range: 30mm-60mm, grinding wheel diameter: 200mm, grinding spindle speed: 6000rpm, workpiece speed: 800rpm. Machine dimensions X/Y/Z: approx. 1100mm/800mm/1300mm, weight: approx. 600kg. The machine has only processed about 1500 workpieces. Documentation available. On-site inspection is possible.