CNC Cycle Lathe

Vdf Boehringer DUS 560

Germany

1997

used

on request

INNO32163

Distance between centers: 2000mm, control: Siemens Sinumerik 810, the control's flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible.

more

CNC Combination and Horizontal Turning Machine

Wmz H200-O

Germany

2018

used

on request

INNO32140

Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible.

more

CNC Center-Drive Lathe

Werkzeugmaschinenbau Sinsheim C 704 MV

Germany

2000

used

on request

INNO32138

Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the manufacturer in 2021. An on-site inspection is possible.

more

CNC Lathe

Optimum OptiTurn L 28HS

Germany

unknown

used

on request

INNO32137

A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible.

more

CNC Center-Drive Lathe

Werkzeugmaschinenbau Sinsheim CM 704

Germany

2003

used

on request

INNO32135

Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max. rapid traverse speed: 20m/min, control: Siemens 840D SL, connected load: 135kW, length: 7800mm, width: 3000mm, height: 3250mm, weight: 42t, with machine documentation, installation plan, foundation plan, transport plan, Knoll coolant system, Knoll chip conveyor, ILT extraction system and Promot loading and unloading gantry. Regularly serviced by the manufacturer, the machine was completely overhauled by the manufacturer in 2016. An on-site inspection is possible.

more

CNC Single-Spindle Lathe

Gildemeister NEF plus 500

Germany

1999

used

on request

INNO32106

Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible.

more

CNC Lathe

Krewema HFDM 45 ZS475

Germany

2018

used

on request

INNO32057

A Krewema CNC large-format semi-frontal lathe is available. X/Z travel: 1500mm/850mm, center height: 475mm, distance between centers base/bed extended: 1685mm/2685mm, max. turning diameter over bed/cross slide: 935mm/620mm, max. swing diameter in the gap: 1600mm, main spindle bore: 155mm, tailstock quill diameter: 140mm, quill taper: MK6, quill stroke: 300mm, tool turret: Sauter, tool stations: 4, 3-jaw chuck diameter: 630mm, faceplate: Schunk, faceplate diameter: 1000mm, control: Siemens 840D sl ShopMill. Including coolant system, external coolant nozzles and chip conveyor. Documentation available. An on-site inspection is possible.

more

CNC Lathe

Xiangfan Ouan CK61220HP/8M

Germany

2007

used

on request

INNO32039

A Xiangfan/SPARK CNC large-format engine lathe is available. Swing diameter over bed/cross slide: 2200mm/1800mm, bed width: 1100mm, distance between centers: 8000mm, max. turning length: 7500mm, max. workpiece weight: 20t, max. workpiece weight between centers: 19t, main spindle bore: 140mm, bar capacity: 100mm, spindle speed: 200rpm, X/Z-axis travel: 920mm/7500mm, feed rate: 2m/min, rapid traverse: 3m/min, tool stations: 4, chuck jaw count: 4, chuck diameter: 2200mm, chip conveyor length: 8000mm, control: Siemens SINUMERIK 802D. Including coolant system, mandrel, chip conveyor and measuring system. Documentation available. An on-site inspection is possible.

more

CNC Lathe

Hyundai Wia L 400 MC

Germany

2018

used

on request

INNO32011

A Hyundai Wia CNC turning center is offered. Max. turning diameter: 560mm, swing diameter over bed: 780mm, swing diameter over slide: 535mm, max. turning length: 1180mm, chuck diameter: 381mm, main spindle bore: 130mm, max. bar capacity: 117mm, max. spindle speed: 2000rpm, spindle power: 37kW/30kW, max. spindle torque: approx. 3073Nm/2490Nm, turret: 12, tool interface: BMT-75, live tools: max. 4000rpm, 7.5kW/5.5kW, X/Z travel: 320mm/1200mm, rapid traverse X: 20m/min, rapid traverse Z: 25m/min, coolant tank capacity: 300l, control: FANUC Series 32i-B, control ON: approx. 10574h, operating time: approx. 5606h, cutting time: approx. 4876h, total parts count: 30968, weight: approx. 11t. Equipment: C-axis, live tools, automatic tool measurement in the working area, programmable tailstock with MT5 quill, high-pressure through-tool coolant (20bar), hydraulic 15-inch power chuck, Manual Guide i, electronic handwheel, tool load monitoring (HWTM), central lubrication and hinge belt chip conveyor. Documentation available. Inspection by appointment possible.

more

CNC Vertical Turning Machine

Emag VSC 400

Germany

2007

used

on request

INNO32008

A vertical EMAG CNC turning machine is available. Turning diameter: 400mm, swing diameter: 420mm, X/Z-axis travel: 850mm/315mm, spindle bearing diameter: 140mm, spindle speed: 4000rpm, rapid traverse X/Z: 45m/min/30m/min, feed force: 11kN, machine dimensions X/Y/Z: approx. 9500mm/4500mm/3000mm, weight: approx. 9000kg. Including hard turning function, dry machining function and chip conveyor. Documentation available. An on-site inspection is possible.

more

CNC Turning- and Milling Center

Index G250/G300

Germany

2008

used

on request

INNO32007

Two Index CNC turning and milling centers are available. 1) Index G250, year of manufacture: 2008, swing diameter: 560mm, turning length: 800mm, bar capacity: 90mm, spindle diameter: 140mm, spindle speed: 3500rpm, spindle power: 43kW/57kW, torque: 275Nm/363Nm, indexing: 2.5°, tool speed: 6000rpm, tool drive power: 11kW, X/Z travel: 300mm/800mm, rapid traverse X: 30m/min, rapid traverse Z: 22.5m/min, feed force X/Z: 7200N/9000N, quill diameter: 65mm, machine dimensions X/Y/Z: approx. 7300mm/4000mm/2600mm, weight: approx. 14000kg, control: Siemens 840D C200-4D. 2) Index G300, year of manufacture: 1998, retrofit: 2022, turning diameter: 270mm, turning length: 710mm, max. swing diameter: 590mm, main spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 5000rpm, torque: 275Nm, power: 43kW, tailstock center distance: 740mm, max. thrust force: 10kN, short slide travel X/Y: 215mm/180mm, short slide travel Z: 710mm/1250mm, feed force X/Y/Z: 8kN/16kN/13kN, rapid traverse: 20m/min, tool stations: 12. Documentation available. An on-site inspection is possible.

more

CNC Lathe

Hwacheon Hi-TECH 700 II MC

Germany

unknown

used

on request

INNO32004

A Hwacheon CNC lathe is offered. Max. turning diameter: 680mm, swing over bed: 900mm, max. turning length: 1986mm, chuck diameter: 380mm, max. bar capacity: 116mm, max. spindle speed: 1800rpm, spindle power: 37kW/30kW, max. spindle torque: approx. 3071Nm/2493Nm, tool turret: 12 stations, tool interface: BMT-75, X/Z-axis travel: 360mm/2050mm, X/Z-axis rapid traverse: 18m/min, coolant tank capacity: 300l, control: Fanuc 0i-TF. Equipment: C-axis, driven tools, automatic in-process tool measurement, programmable tailstock and programmable quill, C-axis spindle clamp, chucking pressure monitoring, centralized lubrication and hinge-belt chip conveyor with chip container. Control ON: approx. 15961h, machining time: approx. 4258h, total part count: 34601. Weight: approx. 15000kg. Documentation available. Inspection possible by appointment.

more

CNC Turning- and Milling Center

Takamatsu XYT-51

Germany

2021

used

on request

INNO31956

A Takamatsu CNC twin-spindle turning and milling center is available. 1) Turning diameter: 190mm, turning length: 150mm, max. one-sided machining length: 440mm, max. bar diameter main spindle/counter spindle: 51mm/42mm, spindle nose 1/2: A2-6/A2-5, spindle bearing 1/2: 100mm/85mm, main spindle bore 1/2: 52mm/43mm, spindle speed: 5000rpm, tool stations: 2×12, travel X1/X2: 162.5mm/170mm, travel Z1/Z2: 500mm/500mm, travel Y: +/-35mm, travel A: 550mm, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2100mm, weight: approx. 7400kg, control: Fanuc 32i-B. 2) TOP Automazioni FU350SX bar feeder, max. bar capacity: 52mm, max. bar length: 3200mm, max. remnant length: 300mm, max. feed rate: 30m/min, max. bundle weight: 2000kg, machine dimensions X/Y/Z: approx. 4300mm/1400mm/1200mm, weight: approx. 1200kg. 3) LTA E 120-X-2-H filtration system, year of manufacture: 2022, filter stages: 2, extraction capacity: 1200m³/h, blower capacity: 2400m³/h, differential pressure: 840Pa, max. separation efficiency: 99.8%, machine dimensions X/Y/Z: approx. 1150mm/620mm/650mm, weight: approx. 125kg. Documentation available. An on-site inspection is possible.

more

CNC Vertical Turning Machine

Emag VSC 200 Duo

Germany

2004

used

on request

INNO31952

A vertical EMAG CNC turning machine with automation is available. Speed: 6500rpm, workpiece length range: 22mm-100mm, turning length: 100mm, measuring length: 94mm, max. swing diameter: 220mm, max. pump pressure: 120bar, tool stations: 12, loading stations: 2, robot type: M-10iA, control: Fanuc 16i-TB, weight: approx. 10000kg, power-on hours: 84847h. Including high-pressure pump, tool setting probe, chip conveyor, coolant system, workpiece shuttle system and robot automation. Documentation available. An on-site inspection is possible.

more

CNC Vertical Turning Machine

Emag VL 5i

Germany

2010

used

on request

INNO31950

A vertical CNC lathe Emag is available. Speed: 4500rpm, Tool stations: 12, Travel X/Z: 570mm/200mm, Max. chuck diameter: 260mm, Max. turning diameter: 260mm, Max. machining diameter: 220mm, Max. workpiece length: 110mm, Rapid traverse X: 60m/min, Rapid traverse Z: 30m/min, Feed force: 5.5kN, Max. workpiece weight: 120kg, Weight: approx. 6500kg, Control: Siemens Sinumerik 840. Documentation available. An on-site inspection is possible.

more

CNC Vertical Turning Machine

Emag VSC 200

Germany

2003

used

on request

INNO31948

A vertical CNC lathe by Emag is available. Workpiece length range: 22mm-100mm, turning length: 100mm, speed: 6500rpm, measuring length: 94mm, max. swing diameter: 220mm, tool stations: 12, weight: approx. 7000kg. Including tool setting probe, carousel workpiece transfer system, chip conveyor and coolant system. Documentation available. An on-site inspection is possible.

more

CNC Vertical Turning Machine

Emag VSC 200 Twin

Germany

2004

used

on request

INNO31947

A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 42668h/42411h, Feed/Machining time 1/2: 29058h/27736h, Automatic operation hours 1/2: 10354h/12404h. Both machines are equipped with chip conveyors, 2 tool turrets, 2 loading stations, a workpiece palletizing system, robot automation and cooling. Documentation available. An on-site inspection is possible.

more

CNC Vertical Turning Machine

Emag VSC 200 Twin

Germany

2004

used

on request

INNO31946

A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z-axis travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 51170h/53006h, Feed/Machining time 1/2: 33418h/30961h, Automatic operation hours 1/2: 14858h/14709h. Both machines are equipped with chip conveyors, 2x tool turrets, 2x loading stations, a workpiece palletizing system, robot automation and coolant system. Documentation available. An on-site inspection is possible.

more

CNC Turning- and Milling Center

Mori Seiki NZ1500 T3

Germany

2008

used

on request

INNO31940

A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible.

more

CNC Turning- and Milling Center

Mori Seiki NZ1500 T3

Germany

2008

used

on request

INNO31938

A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible.

more

All Offers / Metal processing machines / Lathes