▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Welding and cutting [1 - 20 of 82]

Projetion Welding Machine

Dalex PMS 32-5

Germany

2012

used

on request

INNO30183

A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible.

Ultrasonic Welding Machine

Rinco UGH70-100P-230

Germany

unknown

used

on request

INNO28223

A small Rinco ultrasonic welder is available. Frequency: 70kHz, peak power: 120W, continuous operating power: 100W, generator dimensions X/Y/Z: 424mm/148mm/282mm, hand welder length and diameter: 163mm/48mm, operating temperature: 10°C-50°C, storage temperature: -20°C to +70°C, protective measures: Short circuit/overload/overtemperature protection, Weight: approx. 12kg. Documentation available. On-site inspection is possible.

Water Jet Cutting Machine

Water Jet Sweden NCH30B

Germany

2017

used

on request

INNO30132

Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible.

Robot Welding Plant

Kuka KR 15/2

Germany

1998

used

on request

INNO30127

A welding system with a KUKA robot and a rotary device is available. Payload: 15kg, repeatability: ±0.1mm, reach: 1570mm, axes: 6, weight: approx. 225kg. An on-site inspection is possible.

Robot Welding Plant

Cloos QRC-350/Quirox

Germany

2018

used

on request

INNO30081

A complete welding system with a robot and peripheral equipment is available. Welding stations: 2, robot travel path: 11000mm, max. workpiece diameter left/right: 2200mm, max. workpiece length left: 4000mm, workpiece length range right: 1000mm-5000mm, welding process: TIG, materials: aluminum/stainless steel, shielding gas: argon, overall system dimensions X/Y/Z: approx. 15350mm/5700mm/4000mm, control unit: Qirox QC2 Advanced. Including suction technology. Documentation available. An on-site inspection is possible.

Longitudinal Seam Welder

Schnelldorfer ELENA 2100/II

Germany

2002

used

on request

INNO30042

A longitudinal seam welding system Schnelldorfer is available. Welding process: TIG, sheet materials: carbon steel/stainless steel/aluminum, sheet thickness range: 0.5mm-10mm, max. welding speed: 7m/min, welding length: 2100mm, min. pipe inner diameter: 165mm, max. pipe outer diameter: 800mm, rail dimensions X/Y: 40mm/15mm. Machine dimensions X/Y/Z: approx. 4400mm/1850mm/3300mm, weight: approx. 4300kg, control: Siemens S7. Documentation available. An on-site inspection is possible.

Laser Source

Trumpf TruDisk 4002 (4C)

Germany

2010

used

on request

INNO30026

Laser power: 4000W (4kW), wavelength: 1030nm, beam quality (BPP): 8mm/mrad, beam diameter adjustment: 0.1µm, machine dimensions X/Y/Z: approx. 1000mm/1600mm/1600mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

Welding Machine

Ess/merkle

Germany

unknown

used

on request

INNO30017

A total of 18 welding machines are available. 1-9) Welding machine ESS MIG-MAG 311, functional: 3, defective: 2, unclear: 4. Including wire feeder DVK-13 and partly hose package. 10) Welding machine Migatronic MTE 320. Including wire feeder CTU 3000. The hose package is defective. 11) Welding machine Merkle W420 AC/DC TIG Insquare, welding process: TIG, material: aluminum. 12) Welding machine EWM MIG 450 puls. Including wire feeder. 13) Welding machine WIG L-TEC TIG 404 AC/DC. 14) Welding machine Cloos GLC 450 N. Including wire feeder and hose package. 15) Welding machine Oerlikon CPGL 454. Including wire feeder VCW 454 and hose package. 16) Welding machine Stel HI-MIG 500P. Including hose package. 17) Plasma cutting machine Plasma 125. Including hose package. 18) Welding machine Merkle MIG/MAG M 325 DW. Including wire feeder DV30. Documentation available. An on-site inspection is possible.

Welding Table

Deuma DKT 10000

Germany

2002

used

on request

INNO29959

A Deuzer Maschinen & Automationstechnik welding positioner is available. Load center range: 200mm-1400mm, max. faceplate torque: 10000Nm, max. load capacity: 10000kg, max. load capacity at highest load center (1400mm): 2000kg. An on-site inspection is possible.

Welding Machine

Jäckle ProTIG 350 DC

Germany

2018

used

on request

INNO29938

3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site inspection is possible.

MIG/ MAG Welding Machine

Jäckle MIG 405

Germany

2018

used

on request

INNO29937

5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal overload protection, central connection socket for welding torch. An on-site inspection is possible.

WIG Welding Machines

Rehm INVERTIG PRO 350 AC/DC compact / 450 DC

Germany

2013

used

on request

INNO29934

A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible.

Plasma Cutter

Hypertherm powermax 105

Germany

2021

used

on request

INNO29932

A like new plasma cutter is available. Operating hours: 30h, open circuit voltage U₀: approx. 292V, output current I: 105A at 30A 92V–105A 122V at 92 or 122V under 30A, output voltage under load nominal HYP U₂ IEC U₂: approx. 160V at 100 percent power approx. 142–160V depending on standard, duty cycle at 30°C at 80 percent power 105A at X at 40°C, at 100 percent 94A or at other voltages, supply voltage input: three phase 3-PH multiple voltages possible 380–400V etc. U1 50/60Hz, protection class IP23CS, standards EN60974-1 EN60974-10 Class A GOST etc., power consumption P1: 14.9kW/h approx. 14.9kW, duty cycle at 40°C: 80 percent at 105A at certain voltages, 100 percent at slightly lower currents for example approx. 94A at higher voltages, other combinations depending on voltage and standard. Length with handles: 592mm, width: 274mm, height: 508mm, weight with torch 7.6m cable: 45kg. Table with sheet clamp, collection container and rail guide for the plasma cutter optionally available. An on-site inspection is possible.

MAG Welding Machine

E/d/e Format M 354 W

Germany

2013

used

on request

INNO29930

10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, effective mains current I₁ eff: 18A. They are in good condition. An on-site inspection is possible.

Welding Machine

Ewm Ag Tetrix 300 Comfort Puls

Germany

2021

used

on request

INNO29928

20 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding often with MMA pulse automatic also integrated, gas pre-flow and post-flow times adjustable, upslope and downslope times also controllable, torch modes via torch trigger such as reduced secondary current, memory and job storage recurring welding tasks can be saved depending on version approx. 8-100 jobs, energy efficiency high efficiency, standby function available. Remote control and interfaces remote adjusters and functional torches can be connected, optional LAN WiFi gateway ewm Xnet, PC interfaces for parameter setting and monitoring. Very little used. An on-site inspection is possible.

CNC Laser Cutting Machine

Trumpf TruLaser 3040

Germany

2009

used

on request

INNO29878

Laser power: 4kW, working area X/Y/Z: 4000mm/2000mm/115mm, max. sheet thickness mild steel/stainless steel/aluminium: 20mm/15mm/10mm, max. workpiece weight: 1700kg. Machine dimensions X/Y/Z: approx. 11600mm/5300mm/2200mm, weight: approx. 15000kg. Includes Trumpf Liftmaster. Documentation available. An on-site inspection is possible.

CNC Laser Cutting Machine

Trumpf Trumatic 3050-L 5kW

Germany

2003

used

on request

INNO29865

Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible.

Plasma Cutter

Oerlikon Oxytome 30

Germany

2008

used

on request

INNO29842

A complete plasma cutting system Oerlikon including peripheral equipment is available. 1) CNC plasma cutting system Oxytome 30, year of manufacture: 2008. 2) Plasma source Air Liquide Nertajet HP125, year of manufacture: 2008. 3) Filter unit Donaldson Torit DCE DFPRO 8-Cyclo, year of manufacture: 2008, weight: approx. 1625kg. 4) Cooling unit Air Liquide Friojet-30, year of manufacture: 2008, cooling capacity: 2kW, max. operating pressure: 29.5bar, refrigerant: R407c, weight: 80kg. Documentation available. An on-site inspection is possible.

Stud Welding Machine

Soyer BMK-12W

Germany

2000

used

on request

INNO29822

Gun: PH-3N, voltage: 400V, weight: 50kg. Supplied with operating manual, 2x ground cables with clamp BMS/BMK, gas connection, HZ-stud holder, adapter piece and key. An on-site inspection is possible.

Spot Welding Machine

Dalex PMS 11-4 MF

Germany

2002

used

on request

INNO29681

A medium-frequency spot welding machine Dalex-Werke is available. Throat depth: 350mm, electrode stroke: 90mm, electrode holder diameter: 30mm, electrode taper: MK2, rated power at 20% duty cycle: 180kVA, max. welding power: 200kVA, primary voltage: 400V, rated frequency: 1000Hz, electrode force: 20daN–600daN. Weight: approx. 575kg, control: HWS 2102. Documentation available. An on-site inspection is possible.