Innovac GmbH Used machines from Germany
Innovac used-machines Presses [41 - 60 of 90]
CNC-Press-Brake-Coastone-Cone-1600 used
CNC Press Brake
Coastone Cone 1600
Germany
unknown
used
on request
INNO28127
Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible.
Eccentric-Press-Paul-Müller-schuler-hensel-ExP-25-PE-25-250-EBU-25F used
Eccentric Press
Paul Müller/schuler/hensel ExP 25/PE 25-250/EBU 25F
Germany
1988
used
on request
INNO28120
Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible.
Roll-Press-Köppern-52-7,-5ST315-DG-1-E-750x315 used
Roll Press
Köppern 52/7, 5ST315 DG 1 E 750x315
Germany
2018
used
on request
INNO28034
A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible.
CNC-Fineblanking-Press-Feintool-GKP-F-160-GKP-F-250 used
CNC Fineblanking Press
Feintool GKP-F 160/GKP-F 250
Germany
2003
used
on request
INNO28033
There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible.
Hydraulic-Press-Lauffer-RPT-68 used
Hydraulic Press
Lauffer RPT 68
Germany
1987
used
on request
INNO27919
Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible.
Hydraulic-Press-Lauffer-RMT-100 used
Hydraulic Press
Lauffer RMT 100
Germany
2002
used
on request
INNO27825
Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.
Cold-Press-Dr.-Fritsch-KP-35 used
Cold Press
Dr. Fritsch KP 35
Germany
2000
used
on request
INNO27741
A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.
Eccentric-Press-Edelhoff-DARR-1-80 used
Eccentric Press
Edelhoff DARR 1/80
Germany
1995
used
on request
INNO27707
A Gebrüder Edelhoff punching machine is available. Pressing force: 80t, stroke adjustment: 20mm-80mm, ram adjustment: 100mm, stroke rate: 30-200/min, motor power: 15kW, weight: approx. 9500kg. Including reel AMT CA 300/R7-60. The machine occasionally has a problem with the speed, as it increases by itself. This is probably due to the wiring harness. An on-site inspection is possible.
Hydraulic-Press-Mae-S10-RK used
Hydraulic Press
Mae S10 RK
Germany
unknown
used
on request
INNO27487
Pressing force: 10t, oil filling: 300l, max. pressure: 20bar, press type: C-column press, machine dimensions X/Y/Z: approx. 1250mm/1200mm/3000mm. On-site inspection is possible.
Multi-Stage-Press-Peltzer-and-Ehlers-GB-15-4 used
Multi Stage Press
Peltzer & Ehlers GB 15-4
Germany
1977
used
on request
INNO27424
Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg.
Punch-Press-Edel-Stanzprofi-400 used
Punch Press
Edel Stanzprofi 400
Germany
unknown
used
on request
INNO27294
Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps.
Press-Wmw-KD2320 used
Press
Wmw KD2320
Germany
1971
used
on request
INNO27269
Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg.
Mechanical-Press-Kaiser-V400WR used
Mechanical Press
Kaiser V400WR
Germany
2003
used
on request
INNO27242
Press force: 400t, stroke rate: 15-120/min, stroke adjustment (defective): 30mm-210mm, fixed stroke: 186mm, ram adjustment: 150mm, overall height: 350mm-576mm, max. belt width: 600mm, table dimensions X/Y: 2000mm/1400mm, shuttle tables on rails: Blue (220mm) and red (250mm), parts conveyor belt X/Y: 800mm/1800mm, dimensions X/Y: 20000mm/6000mm, operating hours: 32000h. Including conveyor system and change trolley. Documentation available. On-site inspection is possible.
Hydraulic-Press-Wmw-PYE-63-S-1M used
Hydraulic Press
Wmw PYE 63 S/1M
Germany
unknown
used
on request
INNO27164
Pressing force: 630kN, speed up/down: 63/380mm/s, ram stroke: 500mm, throat depth: 360mm, max. table-ram distance: 800mm, ejector force/deep drawing force: 250kN, max. drawing depth: 200mm, ejector stroke: 140mm, weight: approx. 4000kg.
Hydraulic-Frame-Press-Knuth-HRP-150 used
Hydraulic Frame Press
Knuth HRP-150
Germany
1996
used
on request
INNO27163
Pressing force: 1500kN, max. sheet thickness: 2.5mm (at 450N/mm²), max. tool dimensions X/Y: 350mm/650mm, max. tool weight: 270kg, working speed: 13mm/s, ram stroke: 500mm, weight: approx. 10800kg.
CNC-Press-Brake-Eht-EHPS-20-35 used
CNC Press Brake
Eht EHPS 20-35
Germany
1995
used
on request
INNO27107
Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible.
Folding-Press-Machine-Strojáreň-Piesok-CK-2000-2A used
Folding Press Machine
Strojáreň Piesok CK-2000/2A
Germany
1998
used
on request
INNO27070
A Strojáreň Piesok CK-2000/2A manual folding machine is available. Bending angle: 0°-135°, max. working width: 2040mm, max. material thickness: 2mm, max. upper beam stroke: 85mm, max. folding beam adjustment: 80mm, bending process: manual with eccentric weight support. Dimensions X/Y/Z: 3700mm/1250mm/450mm, weight: approx. 1700kg.
Hydraulic-Press-Wanzke-HVZ-160-S used
Hydraulic Press
Wanzke HVZ 160/S
Germany
1998
used
on request
INNO26995
Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible.
Hydraulic-Press-Dunkes-HZS-125 used
Hydraulic Press
Dunkes HZS 125
Germany
2000
used
on request
INNO26947
Pressing force: 1250kN, closing speed: 450mm/s, working speed: 21mm/s, stroke length: 590mm, dry weight: 15000kg. The hydraulic press has a defect in the tool holder, they must be fixated with clamping claws. Documentation available. On-site inspection is possible.
CNC-Press-Brake-Trumpf-TrumaBend-V170 used
CNC Press Brake
Trumpf TrumaBend V170
Germany
1997
used
on request
INNO26911
Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available.