Innovac GmbH Used machines from Germany
Innovac used-machines Machining centers [21 - 40 of 87]
CNC-Horizontal-Machining-Center-Deckel-Maho-DMC-70H-duoBlock used
CNC Horizontal Machining Center
Deckel Maho DMC 70H duoBlock
Germany
2006
used
on request
INNO28159
X-axis: 700mm, Y-axis: 800mm, Z-axis: 800mm, max. spindle speed: 10,000/min, tool holder: SK 40, number of tool positions: 45, pallet diameter: 2x 500x500mm, path control: Siemens 840D power line 3D, connected load: 60kVA, operating/spindle hours: 48,339/ 27,766h. Has been regularly serviced by the manufacturer, during the regular replacement of the rotary union it was found that the clamping force of the spindle holder is 3 kN, this must be repaired. On-site inspection is possible.
CNC-Machining-Center-Deckel-Maho-DMU80-monoBLOCK used
CNC Machining Center
Deckel Maho DMU80 monoBLOCK
Germany
2006
used
on request
INNO28141
Travel X/Y/Z: 880mm/630mm/630mm, feed: 15m/min, rapid traverse: 30m/min, B-axis swivel range: -120°/+30°, C-axis rotation range: 360°, speed: 12000rpm, spindle power: 15kW, spindle mount: SK40. Table dimensions X/Y: 1250mm/700mm, max. table load: 1000kg, NC rotary table diameter: 700mm. Tool positions: 32, max. tool diameter: 80mm/130mm, max. tool length: 315mm, max. tool weight: 8kg. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/2500mm, weight: approx. 10000kg, control: Heidenhain iTNC530, operating hours: 58651h, spindle hours: 20775h. Including belt filter system and chip conveyor. The guides of the X and Y axes may need to be replaced. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Matsuura-Cublex-63 used
CNC Machining Center
Matsuura Cublex-63
Germany
2010
used
on request
INNO28137
Travel X/Y/Z: 760mm/845mm/660mm, A-axis: -125°/+10°, C-axis: 360°, number of pallets: 3 square and 2 round, pallet diameter: 630mm, max. workpiece diameter: 630mm, max. workpiece height: 450mm, max. workpiece weight: 350kg. Speed: 12000rpm, spindle mount: HSK-A63W, spindle power: 22kW. Tool positions: 160, tool magazine: matrix magazine, rapid traverse X/Y/Z: 60m/min, rapid traverse A/C: 25rpm / 220rpm. Machine dimensions X/Y: approx. 7700mm/4000mm, weight: approx. 15000kg, control: Siemens 840 DI. Including Renishaw OMP60, Blum laser measuring system, cooling water recooler with heating function. Tool magazine is defective, therefore only half of the slots can be used. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Dmg-Mori-NHX-4000 used
CNC Machining Center
Dmg Mori NHX 4000
Germany
2017
used
on request
INNO28134
Travel X/Y/Z: 560mm/560mm/660mm, clamping surface: 400mm/400mm, spindle mount: HSK-A63, speed: 20000rpm, power: 25kW/35kW, torque: 130Nm/86Nm. Work table indexing: 0.001°, speed: 100 rpm. Tool positions: 40 + 60, ring magazine holder: BT40/SK/CAT40/HSK-A63, max. tool diameter: 70mm, max. tool length: 450mm, max. tool weight: 12kg. Including cooling lubricant system, chip conveyor, IKZ, filter system, oil mist separator and flow monitor. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/3000mm, weight: approx. 9500kg, control: CELOS with Siemens 840D sl Operate, operating hours: 41220h, spindle hours: 21663h. Documentation available. On-site inspection is possible.
CNC-Vertical-Machining-Center-Dmg-Mori-CMX-600-V used
CNC Vertical Machining Center
Dmg Mori CMX 600 V
Germany
2017
used
on request
INNO28095
Travel X/Y/Z: 600mm/560mm/510mm, accuracy X/Y/Z: 6µm, rapid traverse X/Y/Z: 30m/min, max. feed force: 5kN, max. feed: 30m/min, table dimensions X/Y: 900mm/560mm, max. table load: 600kg. Spindle speed: 12000rpm, drive power: 13kW, torque: 82Nm. Tool positions: 30, max. tool diameter free/occupied: 130mm/80mm, max. tool length: 300mm, max. tool weight: 8kg. Machine dimensions X/Y/Z: approx. 3050mm/3500mm/2950mm, weight: approx. 5000kg, operating hours: 59667h, spindle hours: 16074h. Including internal coolant supply. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Hurco-VMX-50 used
CNC Machining Center
Hurco VMX 50
Germany
2006
used
on request
INNO28004
Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Stama-MC-726-MT used
CNC Machining Center
Stama MC 726 MT
Germany
2006
used
on request
INNO27999
A CNC 5-axis vertical machining center Stama is available. Travel X/Y/Z: 800mm/400mm/350mm, speed: 12,000 rpm, spindle power: 30kW, spindle holder: HSK-63, tool positions: 42, max. workpiece weight: 180kg. Machine dimensions X/Y/Z: approx. 3900mm/3500mm/3300mm, weight: approx. 6600kg, control: Siemens 840D, operating hours: 33,813h. Including measuring probe, bar loader, cooling and filter system. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Haas-VF-5-50 used
CNC Machining Center
Haas VF-5/50
Germany
2010
used
on request
INNO27955
Travel X/Y/Z: 1270mm/660mm/635mm, speed: 7500rpm, table dimensions X/Y: 1375mm/710mm, max. table load: approx. 1800kg, spindle mount: SK50 with 2 gear stages, spindle power: 30hp, tool positions: 30, control: Haas CNC, operating hours: 58,856h, spindle hours: 4039h. Machine dimensions X/Y/Z: 3400mm/4450mm/3500mm, weight: approx. 7800kg. Including magnetic table and chip conveyor. Documentation available. On-site inspection is possible. Expected to be available from the end of February 2025.
CNC-Machining-Center-Heller-MCH-250 used
CNC Machining Center
Heller MCH 250
Germany
2006
used
on request
INNO27911
Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025.
CNC-Machining-Center-Okuma-MA-600HB used
CNC Machining Center
Okuma MA-600HB
Germany
2007
used
on request
INNO27895
X-axis: 1000mm, Y-axis: 900mm, Z-axis: 1000mm, B-axis: 360x 1°, max. spindle speed: 6000/min, pallet dimensions: 630x630mm, number of pallets: 6, rapid traverse: 30m/min, feed rate: 12m/min, number of tool positions: 150, tool holder: MAS BT 50, control: OSP-P200M, length: 10,500mm, width: 5400mm, weight: 27t, operating hours NC running time/ spindle/ cutting time: 49,943/ 47,199/ 41,434h. Has been regularly serviced, with 1° B-axis, ConSep system, measuring probe, pallet station, cooling system, documentation and tool breakage monitoring, without holders, tools or spare parts. On-site inspection is possible.
CNC-Machining-Center-Hurco-VMX-40 used
CNC Machining Center
Hurco VMX 40
Germany
2001
used
on request
INNO27860
Travel X/Y/Z: 1020mm/510mm/610mm, speed: 10000rpm, rapid traverse X/Y/Z: 24m/24m/20m/min, table spindle nose distance: 150mm/760mm, spindle mount: SK-A40, spindle power: 15kW, T-slot width: 18mm, T-slot distance: 100mm, tool positions: 24, table dimensions X/Y: 1220mm/510mm, max. table load: 750kg, machine weight: approx. 5500kg. The machine was equipped with a new spindle, a new tool changer and a new servo motor by Hurco Service 3000 hours ago. Including approx. 850l new deep-hole drilling oil Rhenus UA 19S, 2x deep-hole crown drills with a diameter of 50mm, various thread ring gauges, mandrels and calibers. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Chiron-MILL-2000-high-speed used
CNC Machining Center
Chiron MILL 2000 high speed
Germany
2007
used
on request
INNO27856
X-axis: 2000mm, Y-axis: 500mm, Z-axis: 550mm, Rapid traverse: 60m/min, Spindle speed: 12,000 rpm, Tool holder: HSK-A 63, Number of tool slots: 40, Tool diameter: 75mm, Tool diameter with adjacent free slots: 160mm, Max. tool length: 320mm, Measuring system: Glass scales XYZ, Internal coolant supply: 30 bar at 20 l/min, Control: Heidenhain iTNC 530, Power supply: 25kVA, Weight: 10 tons, Operating hours/Spindle hours: 35,114/14,530h. Includes two spray guns, Knoll PF50/FKA 900 coolant system, chip conveyor, Blum tool breakage control, operating manual, wiring diagram, and hand controller. No clamping devices or tools included. The spindle of the machine is defective and needs to be overhauled. An on-site inspection is possible.
CNC-Machining-Center-Hermle-C30-U used
CNC Machining Center
Hermle C30 U
Germany
2012
used
on request
INNO27852
Travel X/Y/Z: 650mm/600mm/500mm, feed X/Y/Z: 60m/min, speed: 18000rpm, spindle power: 15kW, swivel table diameter: 630mm, tool positions: 76 (extended), max. table load: 600kg. Machine dimensions X/Y/Z: approx. 4500mm/3500mm/3000mm, weight: approx. 11500kg, control: Heidenhain TNC530, tool control: Soflex Tool Control System, operating hours: 40121h, spindle hours: 14483h. Including 16x clamping points with Erowa, zero-point clamping system (MTS), Knoll chip conveyor, flushing gun, electric handwheel and Knoll coolant system. Documentation available. On-site inspection is possible.
CNC-Vertical-Machining-Center-Deckel-Maho-DMC-100-V used
CNC Vertical Machining Center
Deckel Maho DMC 100 V
Germany
unknown
used
on request
INNO27851
Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Mazak-VTC-200-C used
CNC Machining Center
Mazak VTC 200 C
Germany
2002
used
on request
INNO27735
Travel X/Y/Z: 1660mm/510mm/510mm, rapid traverse X/Y/Z: 36m/min, speed: 12000rpm, spindle mount: ISO40, spindle power: 18.5kW, table spindle nose distance: 180mm-690mm, table dimensions X/Y: 2000mm/510mm, tool slots: 30, max. tool diameter: 120mm, max. tool length: 350mm, control: Mazatrol PC-Fusion-CNC 640M. Including tool length measuring device and center wall separation. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Shw-UFZ-6L used
CNC Machining Center
Shw UFZ 6L
Germany
1990
used
on request
INNO27719
A CNC universal milling and drilling center SHW is available. Travel X/Y/Z: 6000mm/2100mm/1500mm, milling head swivel: 180°, rapid traverse X/Y/Z: 8m/min, speed: 4500rpm, spindle power: 31.5kW, machine dimensions X/Y/Z: approx. 11000mm/9000mm/6000mm, weight: approx. 44000kg. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Hurco-BMC-30 used
CNC Machining Center
Hurco BMC 30
Germany
1990
used
on request
INNO27505
Travel X/Y/Z: 760mm/510mm/510mm, table dimensions X/Y: 990mm/510mm, max. workpiece weight: 1500kg, speed: 6000rpm, spindle power: 15kW, tool holder: CAT40/BT40. Tool slots: 24, max. tool diameter: 80mm, max. tool length: 300mm, max. tool weight: 7kg, rapid traverse X/Y/Z: 45m/45m/40m/min. Machine dimensions X/Y/Z: approx. 2700mm/2400mm/2850mm, weight: approx. 5500kg, control: Ultimax. Documentation available. On-site inspection is possible.
CNC-Machining-Center-Deckel-Maho-FP4-60 used
CNC Machining Center
Deckel Maho FP4-60
Germany
unknown
used
on request
INNO27471
Number of axes: 4, travel X/Y/Z: 600mm/500mm/450mm, speed: 5000 rpm, tool holder: SK40, tool slots: 20, control: Dialog 11.
CNC-Machining-Center-Mori-Seiki-Partner-M-300 used
CNC Machining Center
Mori Seiki Partner M-300
Germany
1990
used
on request
INNO27427
Travel X/Y/Z: 400mm/300mm/495mm, spindle center table distance: 25mm-325mm, spindle nose table distance: 125mm-620mm, rapid traverse: 24m/min, feed rate: 5m/min, spindle type: ball screw, spindle diameter: 36mm, speed: 6000rpm, spindle power: 5.5kW, spindle mount: BT40. Tool slots: 30, tool change time: 2.5s, clamping time: 7s, max. tool diameter/length: 110mm/250mm, max. tool weight: 8kg. Table dimensions X/Y: 315mm/315mm, table angle: 7.5°, table clamping force: 3400kg, max. workpiece weight: 150kg. Dimensions X/Y: approx. 1900mm/2300mm, weight: approx. 4500kg, control: Fanuc 0-M, operating hours: 732h, piece counter: 172776. Including cooling lubricant system and tool magazine with 30 places. Documentation available. On-site inspection is possible.
CNC-Double-Spindle-Machining-Center-Stama-MC-536 used
CNC Double Spindle Machining Center
Stama MC 536
Germany
2009
used
on request
INNO27333
Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available.