▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Machining centers [1 - 20 of 133]

CNC Machining Center

Hermle U 630 T

Germany

2001

used

on request

INNO32721

A CNC machining center with 3 axes is offered. Travel X/Y/Z: 630mm/500mm/500mm. Table load capacity: 400kg. Tool taper: SK 40. Number of axes: 3. Spindle hours: approx. 7300h. Operating hours in motion: approx. 7300h. The buffer battery must be replaced. The hour meter readings are stated as approximate values. Control: Heidenhain TNC 426. Equipped with a 16-position chain-type tool changer, coolant system, chip flushing gun, touch probe and handheld control unit. Weight: approx. 4800kg. Inspection possible by arrangement.

CNC Machining Center

Hermle C 600 T

Germany

2002

used

on request

INNO32720

A CNC machining center with 4 axes is offered. Travel X/Y/Z: 600mm/450mm/450mm. Table load: 1000kg. Tool taper: SK 40. Number of axes: 4. Machine body: mineral casting. Spindle hours: 6372h. Operating hours in motion: 6392h. Control: Heidenhain TNC 530. Equipped with a permanently mounted rotary clamping fixture, 30-position carousel tool changer, coolant system, chip washing gun, touch probe and handheld control module. Weight: approx. 6500kg. Inspection possible by arrangement.

Universal Machining Centre

Hermle C 800 U

Germany

1997

used

on request

INNO32719

A 5-axis machining center is offered. Travels X/Y/Z: 800mm/600mm/500mm. Table clamping surface X/Y: 540mm/540mm. Maximum workpiece weight: 300kg. Rapid traverse X/Y/Z: 35m/min. Tool magazine: 30 positions. Control: HEIDENHAIN TNC 430. Equipped with an NC swiveling rotary table, tool changer, protective enclosure and coolant system. Axis damage requiring repair. Repair quotation from the manufacturer is available. Inspection possible by arrangement.

CNC Machining Center

Willemin-macodel S.a. W 408B

Germany

2002

used

on request

INNO32700

Offered for sale is a CNC machining center. Control: GE Fanuc Series 16i-M. Equipped with a fully enclosed machine guarding, viewing windows, electronic handwheel and signal light. Inspection possible by arrangement.

CNC Gantry Machining Center

Reichenbacher Univers

Germany

unknown

used

on request

INNO32684

Offered is a CNC portal machining center with multiple clamping. Equipped with a large clamping table, several workholding fixtures, numerous hose connections and protective curtains on the machining portal. Inspection possible by arrangement.

Vertical CNC Machining Center

Hermle C 1200 V

Germany

1999

used

on request

INNO32671

A vertical CNC machining center is offered. Heidenhain CNC control. Equipped with: Tool magazine with tool changer, chip conveyor, enclosed work area with safety doors, separate CNC control panel. Weight: approx. 13000kg. The machine is defective and therefore in need of repair. Viewing possible by appointment.

Vertical 5-Axis Machining Center

Tajmac Zpc S.s. MCFV 1060S

Germany

2008

used

on request

INNO32612

X-axis travel: 1016mm, Y-axis travel: 610mm, Z-axis travel: 760mm, distance from spindle nose to pallet: 150-910mm, distance from spindle axis to column: 635mm, distance from spindle axis to front of machine: 820mm, distance from table to floor: 959mm, working surface dimensions: 1270x590mm, number of T-slots: 5, T-slot width: 18mm, center T-slot dimensions: 18 H6 mm, centering bore diameter: 30 H6 mm, T-slot spacing: 125mm, max. table load: 1350kg, working feed rate: 0-15m/min, max. programmable feed rate: 40m/min, rapid traverse speed: 40m/min, acceleration: 5m/s², max. spindle speed: 10,000rpm, control system: HEIDENHAIN, length: 2750mm, width: 2120mm, height: 2100mm, weight: approx. 7.7t, operational hours counter: approx. 17,000h, including documentation. An on-site inspection is possible.

5-Axis CNC Machining Center

Deckel Maho HSC 55 linear

Germany

2008

used

on request

INNO32537

Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, C-axis rotation range: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, power-on hours: 56612h, spindle operating hours: 21206h. The machine is located in the United Kingdom. Inspection possible by appointment.

CNC Compact Machining Center

Spinner VC810-II

Germany

2004

used

on request

INNO32524

X-axis travel: 810mm, Y-axis travel: 610mm, Z-axis travel: 610mm, rapid traverse: 30m/min, tool holder: SK40/DIN 69871A, pull stud: DIN 69872A, tool changer: 32 tools, program memory expansion: 64MB (ATA memory card), machine color: RAL 7035/5008, mains voltage: 400V, mains connection: 3/PE~ (three-phase AC with protective earth), mains frequency: 50/60Hz, operating current (I_B): 50A, rated current (I_N): 50A, programming interface: Siemens ShopMill, max. spindle speed: 8,000rpm, screen: 10.4-inch color display, control system: Siemens 810DE PowerLine, operating hours: 37,506h, including documentation. On-site inspection is possible.

Vertical CNC Machining Center

Haas VCE 1600W

Germany

2000

used

on request

INNO32508

Offered for sale is a vertical CNC machining center with tool changer. Control system: HAAS CNC control with operator monitor and keyboard. Equipped with automatic tool changer, machine table, enclosed work area, control pendant and tool cart with tool holders. Inspection possible by arrangement.

Vertical CNC Machining Center

Hardinge Bridgeport XR 1000

Germany

2008

used

on request

INNO32496

Travels X/Y/Z: 1020mm/610mm/610mm, table dimensions X/Y: 1300mm/600mm, max. table load: 900kg, spindle taper: SK40, spindle speed: 12000rpm, tool positions: 30, control: Heidenhain iTNC 530, machine operating hours: 27500h, spindle operating hours: 12700h. Including 3D touch probe, through-spindle coolant at 20bar, additional external air cooling and scraper belt chip conveyor. The machine was used in single-shift operation.

Machining Center

Schwäbische Werkzeugmaschinen BAW04-22

Germany

2011

used

on request

INNO32488

A machining center from Schwäbische Werkzeugmaschinen in need of repair is offered. Travels X/Y/Z1/Z2: 400mm/500mm/425mm/425mm, Y tool-change position: 775mm, swivel axis Q: 180°, rotary axes: A + U, number of spindles: 2, spindle distance: 400mm, max. spindle speed: 17500rpm, spindle bearing diameter: 80mm, rapid traverse: 100m/min, max. tool positions: 232, tool interface: HSK-A63, max. tool diameter: 80mm, max. tool length: 300mm, max. tool weight: 10kg, Control: Siemens 840D. Motor of the C1 axis defective, W axis is defective. Replacement required. Machine dimensions X/Y/Z: 4350mm/7000mm/4000mm, weight: 14.5t. Documentation available. Inspection possible by arrangement.

Vertical CNC Machining Center

Hurco VMX24

Germany

unknown

used

on request

INNO32468

A CNC machining center with T-slot table is offered. Control: HURCO Ultimax with dual-screen console. Equipped with several fixtures mounted on the machine table, coolant system and available HURCO documentation including training documentation for the Ultimax CNC control. Inspection possible by appointment.

CNC machining center

Maho Mahomat 600

Germany

1994

used

on request

INNO32463

A Maho 4-axis CNC machining center is offered for sale. X/Y/Z travel: 600mm/500mm/400mm, tool holder: ISO 40, max. spindle speed: 6000rpm, feed rate: 6m/min, rapid traverse: 13m/min, operating hours/power-on hours: approx. 58569h, control: Philips CNC 432. Equipped with through-spindle coolant supply with high-pressure pump, fully enclosed splash guard, automatic tool changer, 2-pallet changer and chip conveyor. The main spindle is defective and has already been removed from the machine. The machine is not operational. Documentation available. An on-site inspection is possible.

CNC Machining Center

Stama MC 326

Germany

2001

used

on request

INNO32455

A CNC machining center is offered. Control: CNC control with control panel. Equipped with workholding fixture and coolant system. The boards are presumably defective. Inspection possible by prior arrangement.

Vertical Machining Center

Bridgeport VMC 1000-30

Germany

unknown

used

on request

INNO32403

A CNC machining center is offered. Control: Heidenhain TNC 426, spindle motor power: 13kW, full-load current: 30A, internal coolant supply: 10bar, spindle hours: 21704h, machine power-on hours: 51118h, control power-on hours: 25924h, program run time: 20017h. Equipped with internal coolant supply 10bar, 4th and 5th axes and machine vises. Weight: approx. 4300kg. An on-site inspection is possible.

Vertical Machining Center

Bridgeport XR 1000

Germany

2007

used

on request

INNO32396

A vertical CNC machining center in need of repair is offered for sale. Main motor: 15kW (S1), max. current: 36A, phases: 3, control: Heidenhain. Weight: approx. 7000kg. The main spindle has bearing damage, and the control requires overhaul. An inspection is possible by prior arrangement.

Vertical Machining Center

Mazak VQC 15/40

Germany

1986

used

on request

INNO32375

A vertical CNC machining center is offered. X/Y/Z-axis travels: 560mm/410mm/381mm, spindle speed: 60-6000rpm, drive power: 3.7/5.5kW, table size: 410mm × 900mm, max. table load: 300kg, tool shank: ISO 40 (MAS-BT40), rapid traverse X/Y/Z: 24/24/18m/min, control: Mazatrol CAM M-2. Equipped with original parameter lists. Weight: approx. 4200kg, overall dimensions X/Y/Z: approx. 2300mm/2000mm/2641mm. The program is missing because the machine has been disconnected from power for several years. Documentation available. Inspection possible by appointment.

CNC Machining Center

Matec 30HV

Germany

1999

used

on request

INNO32355

Travel X/Y/Z: 2000mm/600mm/800mm, rapid traverse: 30m/min, feed rate: 30m/min, max. spindle speed: 9000rpm, tool holder: SK40, tool positions: 48, clamping plate: 650×2500mm, control: Bosch Type 3 OSA. Documentation available. An on-site inspection is possible.

CNC Universal Machining Center

Mikron UMC 600

Germany

1996

used

on request

INNO32346

A Mikron CNC universal machining center in need of repair is offered. Operating voltage: 400V, frequency: 50Hz, rated current: 40A, control voltage: 24V DC, control: Heidenhain TNC 426, weight: approx. 5800kg. The tool changer is defective and the hydraulic accumulator is empty or defective. The machine has been used in production in single-shift operation with these limitations in recent years. The tools were changed manually, otherwise the machine can be operated. An on-site inspection is possible.