Used Metal processing machines from Germany

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [21 - 40 of 753]

Hydraulic Draw Press

Smg HZPU 500-1600/1150

Germany

1990

used

on request

INNO27066

Press force: 5000kN/500t, ram retraction force: 375kN, ram stroke: 1400mm, installation table ram top: 1800mm, table clamping surface/ram surface X/Y: 1600mm/1150mm, sheet holder force: 2500kN, sheet holder stroke: 500mm, installation table sheet holder top: 1250mm/850mm. Table cushion force: 400kN, table cushion stroke: 380mm, table cushion surface X/Y: 1400mm/1150mm, pump capacity: 360/1500l/min, rapid speed (down/up): 30/14mm/s. Documentation available. Dimensions X/Y/Z: approx. 4400mm/2200mm/3000mm, weight: approx. 60000kg. Available from August 2024.

CNC Band Saw

Karmetal 440 WOS M2

Germany

2013

used

on request

INNO27061

Saw blade dimensions: 41mm x 5100mm, max. cutting diameter: 350mm, dimensions X/Y/Z: 4400mm/1800mm/2000mm, weight: approx. 2400kg.

Briquetting System

Höcker Polytechnik BrikStar iSwarf 440

Germany

2017

used

on request

INNO27063

Briquette diameter: 50mm-100mm, briquette length: 40mm-80mm, throughput: 60-600kg/h, cycle time: 7.9s, oil temperature: 32.5°C. Dimensions X/Y: approx. 1800mm/2250mm, weight: approx. 10000kg. Including Luqui chip processing system, year of construction: 2008, dimensions X/Y: approx. 4000mm/4880mm.

CNC Circular Saw

Berg & Schmid VKS 350

Germany

1999

used

on request

INNO27062

Saw blade diameter: 350mm, cutting range at 90°: round: 110mm, square: 85mm/85mm, flat: 180mm/85mm, cutting range at 45°: round left/right: 105mm/110mm, square left/right: 85mm x 85mm/85mm x 85mm, flat left/right: 130mm x 85mm/130mm x 85mm. Saw blade bore: 40mm, speed: 74rpm, working height: 925mm. Dimensions X/Y/Z: 1150mm/1500mm/2100mm, weight: approx. 500kg.

CNC Vertical Machining Center

Hitachi Seiki VM40-III

Germany

1997

used

on request

INNO27060

Travel X/Y/Z: 500mm/450mm/400mm, tool holder: CAT50, table size X/Y: 900mm/410mm, max. table load: 350kg, speed: 8000rpm, feed X/Y/Z: 15000mm/min, rapid traverse X/Y/Z: 30000mm/min, number of tools: 20, dimensions X/Y/Z: approx. 2200mm/3200mm/2500mm, weight: approx. 5000kg, control: Seicos A10M.

CNC Machining Center

Bridgeport VMC 100-XP2

Germany

2004

used

on request

INNO27059

Axes: XYZ (3-axis), travel X/Y/Z: 950mm/500mm/450mm, speed: 8000rpm, rapid traverse: 40m/min, spindle nose: SK40, table size X/Y: 580mm/1150mm, max. table load: 900kg, tool holder: BT40, tool capacity: 24, control: Heidenhain iTNC 530. dimensions X/Y/Z: approx. 2400mm/4400mm/2700mm, weight: approx. 5000kg.

CNC Turning Center

Nakamura Tome WT-250

Germany

2000

used

on request

INNO27058

Number of axes: XYZC (8-axis), turning diameter: 250mm, turning length: 300mm, spindle diameter: 71mm, speed: 4500rpm, tool holder: BMT-55, number of tool positions: 2 x 12 positions, dimensions X/Y/Z: approx. 4000mm/4600mm/2200mm, weight: approx. 6000kg. Including bar loader Profimat IRCO Breuning, year of construction: 2004, bar diameter/length: 52mm/3000mm, dimensions X/Y: 1200mm/4000mm.

CNC Turning Center

Gildemeister Twin 65 V8

Germany

2002

used

on request

INNO27057

Axes: XYZCB (8-axes), max. turning diameter: 250mm, max. turning length: 300mm, bar loader diameter: 65mm, tool system: VDI30/tooth profile, torque: 150Nm, speed: 5000rpm, drive power: 22kW, control: Siemens Sinumerik 840D powerline. Dimensions X/Y/Z: approx. 2430mm/5600mm/2430mm, weight: approx. 13000kg, operating hours: approx. 34624h, spindle hours: approx. 22797h.

Ultrasonic Welding Machine

Hollmann/rinco

Germany

2004

used

on request

INNO27043

Two filter cartridge welding systems are available. 1) Hollmann with propane gas cylinder, year of construction: 2004, working width: 600mm, connected load: 15.5kW, dimensions X/Y/Z: approx. 1400mm/4100mm/2300mm, weight: approx. 400kg. 2) Rinco ultrasonic welding machine for the extension of hose pockets, dimensions X/Y/Z: approx. 1000mm/2000mm/1700mm, weight: 1200kg. On-site inspection is possible.

CNC Lathe

Wmw DF 3/3

Germany

unknown

used

on request

INNO27034

Turning diameter: 480mm, turning length: 1250mm, turning spindle bore: 90mm, speed: 500rpm, torque: 1250Nm, control: CNC-H 645, dimensions X/Y: approx. 5400mm/2200mm. On-site inspection is possible.

Surface Grinding Machine

Aba FF450/30

Germany

1971

used

on request

INNO27033

Sanding length/width: 450mm/300mm, workpiece height: 350mm, max. sanding wheel width: 50mm, weight: approx. 1500kg.

Die Casting Machine

Idra OL 300 ST DG

Germany

1982

used

on request

INNO27036

Clamping force: 300t, mold clamping area X/Y: 880mm/880mm, plunger stroke: 400mm, column diameter: 100mm, ejector force: 18t. Height adjustment: 200mm, clamping surface between the columns X/Y: 555mm/555mm, mold height min./max.: 200mm/650mm, mold opening stroke: 540mm, max. casting weight: 5.2kg. Dimensions X/Y/Z: approx. 6150mm/1950mm/2615mm, weight: approx. 16000kg. This machine is a spare parts carrier. Controls, electrics and paintwork must be renewed. On-site inspection is possible.

Chamber Furnace

Lac PKRC 130/95

Germany

2018

used

on request

INNO27031

T. max.: 950°C, T. max. long-term operation: 850°C, volume: 69l, internal dimensions X/Y/Z: approx. 372mm/635mm/303mm, power: 21kW, max. floor load: 200kg, dimensions X/Y/Z: 1635mm/1930mm/1670mm, weight: approx. 950kg. Documentation available. On-site inspection is possible.

CNC Laser Cutting Machine

Trumpf TLC 6005

Germany

2001

used

on request

INNO27030

Laser power: 4000W, working range X/Y/Z: 4000mm/2500mm/1000mm, laser device: TLF 4000 turbo, laser type: CO2, operating hours: 95778h, beam on: 19423h, laser hours: 119092h, weight: approx. 12000kg. Water change according to Trump specifications. The laser optics and geometry are checked weekly. Cooling unit included. One of two compressors on the cooling unit and the front doors (Landert drive) are defective.

Aluminum Wet Separator

Keller VDN-AS 22.4

Germany

2002

used

on request

INNO27028

Nominal volume flow: 22400V, drive power: 37kW, diameter: 1800mm, extraction volume: 27000m³/h. Important parts such as the cyclone were replaced in 2022. Documentation available.

Horizontal Boring Machine

Wagner WBX 1003

Germany

1987

used

on request

INNO27026

A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available.

Belt Drop Hammer

Gustav Wolf

Germany

unknown

used

on request

INNO27022

A Gustav Wolf belt drop hammer is available.

Billet Shear

Peddinghaus 214/200

Germany

unknown

used

on request

INNO27021

A Peddinghaus 214/200 billet shear is available. Cutting capacity: square: 70mm, round: 80mm, flat: 180mm x 35mm/250mm x 28mm, weight: approx. 5000kg.

Laser Cutting Machine

Bystronic ByVention 2,2kW

Germany

2008

used

on request

INNO27025

Laser type: CO2, laser power: 2.2kW, working range X/Y/Z: 1500mm/3000mm/100mm, max. material thickness: aluminum: 8mm, mild steel: 10mm, stainless steel: 6mm, max. workpiece weight: 890kg. Positioning speed X/Y: 100m/min, simultaneous positioning speed: 140m/min, total energy consumption: 37kW, max. sheet weight: 70kg/m². Dimensions X/Y/Z: 6000mm/6400mm/2150mm, weight: approx. 13500kg.

Oven System

Ipsen SH-3.18x153-E

Germany

1986

used

on request

INNO27024

A furnace system consisting of an (1) Ipsen pusher-type furnace with shaking trough, a (2) WMV Apparatebau cleaning system and a (3) Kohnle tempering furnace is available. 1) Year of construction: 1986, working temperature range: 850°C-890°C, heating: electric, quenching: oil including oil cooling (via air), defects: Furnace lining and muffle. 2) Year of construction: 2011, drum diameter: 500mm, processes: spinning/washing/rinsing/drying, including transfer unit. 3) Year of construction: 1986, working temperature range: 400°C-500°C, heating: electric. Including large package of spare parts, especially for the Ipsen oven.