▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [141 - 160 of 1221]

CNC Travelling Column Machining Center

Axa VSC-2-MK

Germany

1996

used

on request

INNO32180

Travel X/Y/Z: 740mm/500mm/480mm, tool holder: SK40, tool positions: 22, max. spindle speed: 4700rpm, control: Heidenhain TNC 426 PA. Machine dimensions: approx. 3000mm/2400mm/2700mm, weight: approx. 5000kg. The machine was used exclusively for machining plastic and operated without metalworking fluid. The coolant system must be repaired. The backup battery of the control is depleted and must be replaced. Inspection possible by arrangement.

Roller-Type Swiss-Type Lathe

Wmw DLZ 1000 III 5000

Germany

unknown

used

on request

INNO32179

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Horizontal Band Saw

Hema HTR 600

Germany

2004

used

on request

INNO32176

Wheel diameter: 600mm, working height: 955mm, max. cutting height: 140mm, clearance height: approx. 5mm-300mm, clearance width: max. approx. 650mm, max. saw blade length: 5600mm, saw blade width: 8mm-25mm, max. saw blade thickness: 0.65mm, max. band speed: 1640m/min, conveyor belt speed: 0,5m/min - 5m/min, conveyor belt width: 650mm. Overall length with conveyor belt: 2820mm, overall width: 2550mm, overall height: 1800mm, machine weight: approx. 700kg. Documentation available. Inspection possible by arrangement.

Vertical Lathe

Hessapp VDM1200

Germany

2002

used

on request

INNO32173

Max. turning diameter: 1000mm, max. swing diameter: 1250mm, max. workpiece diameter: 1000mm, max. workpiece length: 850mm, max. workpiece weight: 1000kg, X/Z travel: 1250mm/1000mm, max. speed: 900rpm, feed rate: 14m/min, rapid traverse: 20m/min, spindle nose: DIN 55026 short taper size A15, tool interface: DIN 69880 VDI60 tool holder, spindle diameter at the front bearing: 240mm, control: Siemens Sinumerik 840D. Machine weight: approx. 25t, space requirement: 85m². Equipment: SMW IN-D 1000 chuck, chip conveyor. The machine has no driven tools. Documentation available. Inspection possible by appointment.

WIG Welding Rectifier

Kjellberg KTF 402T

Germany

unknown

used

on request

INNO32171

Welding rectifier, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible.

Plate Shear

Atlantic ATS 3012

Germany

1989

used

on request

INNO32170

Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment.

CNC Lathe

Buffalo Machinery Microturn Challenger BNC 1640 S

Germany

2007

used

on request

INNO32165

A Buffalo CNC lathe in need of repair is offered for sale. Center height: 200mm, distance between centers: 880mm, chuck diameter: 160mm, swing over bed: 410mm, swing over cross slide: 230mm, bed width: 260mm, spindle bore: 46mm, spindle nose: A2-5, max. spindle speed: 5000rpm, X-axis travel: 190mm, Z-axis travel: 855mm, rapid traverse: 12m/min, tailstock quill diameter: 58mm, tailstock quill travel: 140mm, tailstock quill taper: MT4, control: Fagor 8055 TC. Accessories included. Dimensions X/Y/Z: approx. 2286mm/1800mm/2230mm, weight: approx. 2350kg. The feed motor of the spindle drive is defective. An on-site inspection is possible.

Tool Milling Machine

Optimum OPTImill MT 50

Germany

2017

used

on request

INNO32164

Offered for sale is an Optimum toolroom milling machine. Drilling capacity in steel: 30mm, continuous drilling capacity in steel: 25mm, spindle taper: ISO40, quill travel: 120mm, milling head swivel range: +/-45°, cross table X/Y: 1000mm/240mm, max. cross table load: 160kg, X/Y/Z travel: 580mm/200mm/340mm, X-axis table feed: 720mm/min. Including accessories. The tray has been cut open on the right-hand side so that longer workpieces can also be machined. Dimensions X/Y/Z: approx. 2270mm/1500mm/2100mm, weight: approx. 900kg. An on-site inspection is possible.

CNC Cycle Lathe

Vdf Boehringer DUS 560

Germany

1997

used

on request

INNO32163

Distance between centers: 2000mm, control: Siemens Sinumerik 810, the control's flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible.

Plate Shear

Atlantic ATS 3006

Germany

1990

used

on request

INNO32159

Offered for sale is an Atlantic guillotine shear. Cutting length: 3000mm, max. cutting thickness: approx. 6mm. Documentation available. An on-site inspection is possible.

CNC Milling Machine

Hurco VM1

Germany

2004

used

on request

INNO32158

X-axis: 660mm, y-axis: 350mm, z-axis: 450mm, table clamping surface dimensions: 762x356mm, speed: 10-10,000/min, tool holder: SK 40 DIN 69871, number of tool changer stations: 20, rapid traverse: 28m/min, control: ULTIMAX 4, length: 2000mm, width: 1800mm, height: 2660mm, weight: 2.9t, with documentation, documents, hydraulic diagram and electrical circuit diagram. An on-site inspection is possible.

Decarburizing and Bluing Furnace

Bosch OBD 78

Germany

1975

used

on request

INNO32150

A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible.

Pusher Furnace System

Aichelin DLGs 100/350

Germany

1977

used

on request

INNO32148

Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing furnace length: 5000mm, cooling zone length: 5700mm, overall furnace system length: 15,100mm, loading height of the system: 700mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible.

Punching Machine

Bruderer BSTA 41

Germany

1986

used

on request

INNO32146

Max. pressing force: 400kN, stroke rate: 100-1200/min, connected load: 18kW, compressed air connection: R 1/2inch, 6-10bar, adjustable strokes: 13, 15, 19, 25, 32, 38, 44, 51, 57mm, max. fixed stroke (special version): 57mm, ram height adjustment: 60mm, tool installation height: 4 Mm 677, max. width of tool installation opening: 690mm, max. strip passage width: 190mm, strip feed height above clamping plate: 60-140mm, bed opening: 640x220mm, lower clamping plate: 4 Mm 671, upper clamping plate: 4 Mm 672, installation dimensions: 4 Mm 667, length: 1695mm, width: 2185mm, height: 3010mm, weight with feed unit: 6.37t. Equipment: drive control, tool clamping plate, installation dimensions, upper clamping plate, hand protection device, BBV 41.202/150 strip feed unit, strip-end monitoring, transport and lifting device, complete documentation, installation, operating and maintenance instructions and machine tools. An on-site inspection is possible.

5-Axes CNC Milling Machine

Röders RXU 1200 DSH/ RXP 500 DSC

Germany

2015

used

on request

INNO31202

A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible.

CNC Combination and Horizontal Turning Machine

Wmz H200-O

Germany

2018

used

on request

INNO32140

Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible.

CNC Center-Drive Lathe

Werkzeugmaschinenbau Sinsheim C 704 MV

Germany

2000

used

on request

INNO32138

Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the manufacturer in 2021. An on-site inspection is possible.

CNC Lathe

Optimum OptiTurn L 28HS

Germany

unknown

used

on request

INNO32137

A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible.

CNC Center-Drive Lathe

Werkzeugmaschinenbau Sinsheim CM 704

Germany

2003

used

on request

INNO32135

Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max. rapid traverse speed: 20m/min, control: Siemens 840D SL, connected load: 135kW, length: 7800mm, width: 3000mm, height: 3250mm, weight: 42t, with machine documentation, installation plan, foundation plan, transport plan, Knoll coolant system, Knoll chip conveyor, ILT extraction system and Promot loading and unloading gantry. Regularly serviced by the manufacturer, the machine was completely overhauled by the manufacturer in 2016. An on-site inspection is possible.

Laser Pipe Cutting Machine

Trumpf Trulaser Tube 5000

Germany

2007

used

on request

INNO32133

A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible.