Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Metal processing machines
Broaching and slotting and drawing machines 10 Deburring machines 6 Diecasting 2 Drilling 38 Engraving machines 3 Eroding machines 27 Facing and centering machines 1 Forging attachments 2 Foundry machinery 1 Gear cutting machines 2 Grinding machines 108 Honing machines 2 Lapping machines 1 Lathes 194 Machining centers 136 Measuring machines 1 Milling machines 135 Other machinery 44 Pipe and tube working machines 11 Planing machines 1 Polishing machines 2 Presses 97 Profile processing machines 9 Roller leveller 3 Saws 57 Sheet metal working 84 Stoves 40 Surface technology 53 Threading machines 1 Tools and accessories 5 Transfer machines 11 Welding and cutting 102 Window production machines 8 Wire industry machinery 24
Innovac used-machines Metal processing machines [641 - 660 of 1221]
CNC-Machining-Center-Dmg-Mori-DMC-835-V used
CNC Machining Center
Dmg Mori DMC 835 V
Germany
unknown
used
on request
INNO30541
A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible.
more
CNC-Machining-Center-Deckel-maho-DMU-80-T used
CNC Machining Center
Deckel-maho DMU 80 T
Germany
1998
used
on request
INNO30535
A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.
more
Water-Jet-Cutting-Machine-Soitaab-Thesis-2040 used
Water Jet Cutting Machine
Soitaab Thesis 2040
Germany
2014
used
on request
INNO30528
A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible.
more
Glass-Rail-Saw-Striffler-2733 used
Glass Rail Saw
Striffler 2733
Germany
unknown
used
on request
INNO30527
A small Striffler glazing bead saw is available. Cutting speed: 36m/s, working length: 2400mm, miter setting: 45°, max. cutting width: 75mm, max. cutting height: 50mm, saw blade dimensions X/Y: 250mm/220mm, weight: approx. 100kg. An on-site inspection is possible.
more
CNC-Machining-Center-Mazak-VTC-800-30SR used
CNC Machining Center
Mazak VTC-800/30SR
Germany
2015
used
on request
INNO30524
A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.
more
Shaping-Machine-Hahndorf-REWK-86-14 used
Shaping Machine
Hahndorf REWK 86/14
Germany
2007
used
on request
INNO30522
A Hahndorf keyway slotting and broaching machine is available. Stroke range slotting: 60mm-300mm, max. slot width slotting: 34mm, max. slotting length: 300mm, max. slot width broaching: 14mm, max. broaching tool length: 640mm, max. cutting speed forward/return: 3m/3m/min, weight: approx. 300kg. Documentation available. On-site inspection is possible.
more
Laser-Source-Ipg-Laser-YLS-3000-CT used
Laser Source
Ipg Laser YLS-3000-CT
Germany
2013
used
on request
INNO30517
An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible.
more
Wire-EDM-Machine-Mitsubishi-DWC-200H used
Wire EDM Machine
Mitsubishi DWC 200H
Germany
1987
used
on request
INNO30512
A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible.
more
Sheet-Metal-Shear-Schneider used
Sheet Metal Shear
Schneider
Germany
unknown
used
on request
INNO30472
A hydraulic large-format sheet metal shear Schneider is available. Width: 6020mm, bending length: 6000mm, max. sheet thickness at 6000mm: 10mm. With position display. An on-site inspection is possible.
more
Double-Mitre-Saw-Emmegi-Single-2-500-TU6-P1250KG used
Double Mitre Saw
Emmegi Single 2 500 TU6 P1250KG
Germany
1994
used
on request
INNO30464
A double mitre saw Emmegi (Pressta Eisele) is available. Saw blade diameter: 500mm, saw heads: 2, saw head swivelling range: 90°-45°, cutting length range: 250mm-5000mm, max. cutting height: 350mm, max. cutting width: 160mm. Machine dimensions X/Y/Z: approx. 5750mm/1250mm/1700mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.
more
Cleaning-System-Bvl-Oberflächentechnik-Rotocleaner-750 used
Cleaning System
Bvl Oberflächentechnik Rotocleaner 750
Germany
1996
used
on request
INNO30462
Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment.
more
Column-Type-Drilling-Machine-Gillardon used
Column-Type Drilling Machine
Gillardon
Germany
1984
used
on request
INNO30461
Offered is a column drilling machine year of construction 1984, drive: VEM KPER 80 K 4, speed ranges: 3 step belt drive, spindle speed: approx. 1380rpm, quill stroke: approx. 120mm, MT2. Inspection is possible by appointment.
more
Gear-Machining-Line-Emag-VLC100-VLC200-Trackmotion used
Gear Machining Line
Emag VLC100/VLC200/Trackmotion
Germany
2015
used
on request
INNO30456
A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible with power connection.
more
CNC-Lathe-and-Grinding-Machine-Emag-VSC-250-DS used
CNC Lathe and Grinding Machine
Emag VSC 250 DS
Germany
2015
used
on request
INNO30455
A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible with power.
more
Cut-Off-Saw-Kaltenbach-HMB-360 used
Cut-Off Saw
Kaltenbach HMB 360
Germany
1996
used
on request
INNO30448
A horizontal miter saw Kaltenbach is available. Saw blade dimensions X/Y/Z: 3830mm/27mm/0.9mm, saw blade speed: 100m/min, working height: 700mm, max. cutting range round material: 305mm, max. cutting range square material: 360mm/305mm. Machine dimensions X/Y/Z: approx. 2300mm/1450mm/1650mm, weight: approx. 800kg. An inspection on site is possible.
more
Radial-Drilling-Machine-Donau-Werkzeugmaschinen-DR23 used
Radial Drilling Machine
Donau Werkzeugmaschinen DR23
Germany
unknown
used
on request
INNO30444
Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible.
more
Spot-Welding-Machine-Pei-Point-PF-136 used
Spot Welding Machine
Pei Point PF 136
Germany
2013
used
on request
INNO30432
A resistance spot welding machine Pei is available. Rated power at 50%: 35kVA, secondary short-circuit current: 19kA, max. welding current: 15.2kA, secondary continuous current: 4.8kA, secondary voltage: 5.3V, electrode force: 180daN, arm spacing range: 140mm-350mm, arm reach: 430mm, arm diameter: 50mm, electrode stroke: 60mm, weight: approx. 280kg. Documentation vorhanden. An on-site inspection is possible.
more
CNC-Plasma-Cutting-System-Kjellberg-PM-S40W-PZ-S40W used
CNC Plasma Cutting System
Kjellberg PM-S40W/PZ-S40W
Germany
unknown
used
on request
INNO30431
A CNC gantry plasma and flame cutting machine is available. Working dimensions X/Y: 6500mm/2500mm, power source: Kjellberg, max. number of torches: 3, control: Heidenhain TNC 355. An on-site inspection is possible.
more
CNC-5-Axis-Machining-Centre-Mazak-Varuaxis-630-5X-II-T used
CNC 5-Axis Machining Centre
Mazak Varuaxis 630-5X II T
Germany
2010
used
on request
INNO30414
Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.
more
Guillotine-Shear-Ed.-Paskowsky-S.a.-ECLAIR-ASS-4MM used
Guillotine Shear
Ed. Paskowsky S.a. ECLAIR ASS 4MM
Germany
1980
used
on request
INNO30403
Cutting length: 2520 mm, cutting thickness: 4 mm, voltage: 380 V, power connection: 16 A. The blades of the shears are likely no longer able to be sharpened due to wear and tear and would need to be replaced. On-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 3
Automation-technology 60
Beverage-filling-technology 40
Complete-production-lines 3
Construction-machinery 34
Energy-management 150
Food-processing-and-beverage 169
Material-storage 70
Materials-handling-technology 79
Measurement-and-testing 77
Medical-equipment 20
Metal-processing-machines 1221
Mining 6
Office-equipment 4
Other-machines 60
Packaging-machines 252
Pharmaceutical-and-cosmetics 17
Plastics-processing-machines 202
Printing-machines 101
Process-equipment-and-chemistry 177
Packaging-material-machinery 87
Robotics 31
Surplus-goods 5
Textile-machinery 105
Utility-vehicles 13
Woodworking-machines 102