Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Metal processing machines
Broaching and slotting and drawing machines 8 Deburring machines 2 Diecasting 2 Drilling 47 Engraving machines 2 Eroding machines 16 Facing and centering machines 1 Forging attachments 2 Gear cutting machines 1 Grinding machines 96 Honing machines 1 Lapping machines 1 Lathes 172 Machining centers 100 Measuring machines 3 Milling machines 121 Other machinery 31 Pipe and tube working machines 12 Planing machines 2 Polishing machines 1 Presses 79 Profile processing machines 3 Roller leveller 2 Saws 49 Sheet metal working 99 Stoves 36 Surface technology 39 Threading machines 2 Tools and accessories 2 Transfer machines 10 Welding and cutting 90 Window production machines 9 Wire industry machinery 20
Innovac used-machines Metal processing machines [381 - 400 of 1061]
MAG-Welding-Machine-E-d-e-Format-M-354-W used
MAG Welding Machine
E/d/e Format M 354 W
Germany
2013
used
on request
INNO29930
10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, effective mains current I₁ eff: 18A. They are in good condition. An on-site inspection is possible.
more
Welding-Machine-Ewm-Ag-Tetrix-300-Comfort-Puls used
Welding Machine
Ewm Ag Tetrix 300 Comfort Puls
Germany
2021
used
on request
INNO29928
20 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding often with MMA pulse automatic also integrated, gas pre-flow and post-flow times adjustable, upslope and downslope times also controllable, torch modes via torch trigger such as reduced secondary current, memory and job storage recurring welding tasks can be saved depending on version approx. 8-100 jobs, energy efficiency high efficiency, standby function available. Remote control and interfaces remote adjusters and functional torches can be connected, optional LAN WiFi gateway ewm Xnet, PC interfaces for parameter setting and monitoring. Very little used. An on-site inspection is possible.
more
Rolling-Mill-Troester-WHX-20 used
Rolling Mill
Troester WHX 20
Germany
1973
used
on request
INNO29927
A Troester mixing mill is available. Including strip cooler, year of manufacture: 1993. An on-site inspection is possible.
more
CNC-Lathe-Pittler-PV4000-1-2 used
CNC Lathe
Pittler PV4000/1-2
Germany
2018
used
on request
INNO29926
A Pittler PV4000 CNC large-format vertical lathe is available. Swing diameter: 3800mm, max. workpiece weight: 35000kg, turning diameter: 3800mm, travel X/Z: 2x3200mm/1000mm, rapid traverse X/Z: 32m/20m/min, feed force X/Z: 22kN. Spindle flange diameter: 1900mm, face bearing diameter: 1400mm, spindle diameter: not specified, tool positions: 25/41, max. tool diameter: 150mm, max. tool weight: 20kg, max. tool length: 400mm. Pump pressure: 70bar, filtration capacity: 150l/min, water tank volume: 1550l, air capacity: 4000m³/h, extraction nozzle diameter: 350mm. Röhm chuck KFG 3500/3/6/12, outer diameter: 3500mm, height: 500mm, jaw stroke: 55mm, compensation per jaw: +/-6mm, piston stroke: 120mm, max. operating pressure: 60bar, max. total clamping force: 200kN, max. speed: 100rpm, jaw width: 70mm, max. weight: 30000kg. Overall system dimensions X/Y/Z: approx. 11400mm/5300mm/5000mm, total weight: approx. 150000kg, control: Siemens Sinumerik 840D sl. Includes Knoll chip conveyor, Knoll KF150/1550 paper band filter, Friess type 1U oil skimmer with tank, and UAS Smog Hog SH-M20 air cleaner. Documentation available. An on-site inspection is possible.
more
CNC-Lathe-Pittler-PV2500-1-2 used
CNC Lathe
Pittler PV2500/1-2
Germany
2021
used
on request
INNO29925
A Pittler CNC large-format vertical lathe is available. Swing diameter: 3000mm, max. workpiece weight: 25000kg, turning diameter: 2800mm, travel X/Y: 2x2700mm/2x1000mm, rapid traverse X/Z: 40m/24m/min, feed force X/Z: 22kN. Spindle flange diameter: 1100mm, face bearing diameter: 800mm, spindle diameter: 360mm, tool positions: 25/41, max. tool diameter: 150mm, max. tool weight: 20kg, max. tool length: 400mm. Pump pressure: 70bar, filtration capacity: 400l/min, water tank volume: 2250l, air capacity: 4000m³/h, extraction nozzle diameter: 350mm. Röhm chuck KFG 2500/3/6/12, outer diameter: 2500mm, height: 400mm, jaw stroke: 50mm, compensation per jaw: +/-6mm, piston stroke: 87.5mm, max. operating pressure: 80bar, max. total clamping force: 182kN, max. speed: 170rpm, jaw width: 70mm, max. weight: 10000kg. Overall system dimensions X/Y/Z: approx. 11400mm/5300mm/5000mm, total weight: approx. 140000kg, control: Siemens Sinumerik 840D sl. Includes Knoll chip conveyor, Knoll KF400/2250 paper band filter, Friess type 1U oil skimmer with tank, and UAS Smog Hog SH-M20 air cleaner. Documentation available. An on-site inspection is possible.
more
Plate-Shear-Darley-GS.3016 used
Plate Shear
Darley GS.3016
Germany
1975
used
on request
INNO29917
Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible.
more
Center-Lathe-Meuser-and-Co.-Gmbh-M2L used
Center Lathe
Meuser & Co. Gmbh M2L
Germany
unknown
used
on request
INNO29903
A conventional center lathe is available. An on-site inspection is possible.
more
CNC-Pipe-Bending-Machine-Pulzer-CNC-25L used
CNC Pipe Bending Machine
Pulzer CNC 25L
Germany
1999
used
on request
INNO29902
Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible.
more
CNC-Milling-Machine-Mikron-WF-31D used
CNC Milling Machine
Mikron WF 31D
Germany
1992
used
on request
INNO29898
X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible.
more
CNC-Milling-Machine-Lasercomb-ProPertinax used
CNC Milling Machine
Lasercomb ProPertinax
Germany
2009
used
on request
INNO29895
A Lasercomb CNC high-speed die milling machine is available. Travel X/Y: 1070mm/1070mm, number of spindles: 4, spindle speed: 50000rpm, continuous power: 180W. Dimensions X/Y: approx. 2100mm/1900mm, weight: approx. 430kg. Documentation available. An on-site inspection is possible.
more
CNC-Laser-Cutting-Machine-Trumpf-TruLaser-3040 used
CNC Laser Cutting Machine
Trumpf TruLaser 3040
Germany
2009
used
on request
INNO29878
Laser power: 4kW, working area X/Y/Z: 4000mm/2000mm/115mm, max. sheet thickness mild steel/stainless steel/aluminium: 20mm/15mm/10mm, max. workpiece weight: 1700kg. Machine dimensions X/Y/Z: approx. 11600mm/5300mm/2200mm, weight: approx. 15000kg. Includes Trumpf Liftmaster. Documentation available. An on-site inspection is possible.
more
Center-Lathe-Meuser-MOL used
Center Lathe
Meuser MOL
Germany
unknown
used
on request
INNO29872
A lathe Meuser with defective return is available. Center height: 185mm, distance between centers: 700mm, swing over bed/cross slide: 370mm/200mm, bed width: 320mm, spindle bore: 47mm, speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/1400mm, weight: approx. 1500kg. An on-site inspection is possible.
more
CNC-Laser-Cutting-Machine-Trumpf-Trumatic-3050-L-5kW used
CNC Laser Cutting Machine
Trumpf Trumatic 3050-L 5kW
Germany
2003
used
on request
INNO29865
Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible.
more
Assembly-System-Anger used
Assembly System
Anger
Germany
2019
used
on request
INNO29864
A complete automation system for handling machining center products is available. 1) Full protection cabin with safety door. 2) 6-axis robot Kuka KR 120 R 3200 PA with gripper adapter. 3) 6-axis robot Kuka KR 120 R 3500 with gripper adapter. 4) 2x 6-axis robots Kuka KR 10 R 1420 with gripper. 5) Handling unit with 2 robots. 6) Reference chamber. 7) Marking station with extraction, cleaning station, and assembly unit for 2 lanes. 8) 2x adhesive application stations. 9) 2x screwing stations. 10) Drawer system with part inserts. 11) Pallet storage area. The transfer stations and removal/handling grippers are designed for specific parts. Documentation available. An on-site inspection is possible.
more
CNC-Double-Spindle-Lathe-Hyundai-LM-1600-TTMS used
CNC Double Spindle Lathe
Hyundai LM 1600 TTMS
Germany
2023
used
on request
INNO29862
Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible.
more
CNC-Double-Spindle-Lathe-Hyundai-LM-1600-TTSY used
CNC Double Spindle Lathe
Hyundai LM 1600 TTSY
Germany
2023
used
on request
INNO29861
Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible.
more
CNC-Milling-Machine-Wissner-Maschinenbau-Witec-32-Performance used
CNC Milling Machine
Wissner Maschinenbau Witec 32 Performance
Germany
1999
used
on request
INNO29849
X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible.
more
Band-Saw-Metora-MB-330-3 used
Band Saw
Metora MB 330/3
Germany
unknown
used
on request
INNO29848
Cutting range round 90°/30°: 320mm/250mm, cutting range square 90°/30°: 320mm/240mm, max. profile capacity: 500mm/320mm, max. workpiece height: 320mm, throat depth: 520mm, saw band dimensions X/Y/Z: 4600mm/32mm/1.1mm, band speed: 96m/min. Machine dimensions X/Y/Z: approx. 2200mm/1400mm/1400mm, weight: approx. 800kg. An on-site inspection is possible.
more
Center-Lathe-Meuser-M2L used
Center Lathe
Meuser M2L
Germany
unknown
used
on request
INNO29846
Center height: 230mm, turning diameter over bed/cross slide: 460mm/270mm, spindle bore: 62mm, distance between centers: 1000mm, threading range inch: 4-80 TPI. The machine has been retrofitted with a digital display. An on-site inspection is possible.
more
Punching-Press-Mubea-KLH500-6.10 used
Punching Press
Mubea KLH500/6.10
Germany
unknown
used
on request
INNO29843
Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 2
Automation-technology 64
Beverage-filling-technology 38
Complete-production-lines 2
Construction-machinery 26
Energy-management 131
Food-processing-and-beverage 153
Material-storage 61
Materials-handling-technology 72
Measurement-and-testing 72
Medical-equipment 9
Metal-processing-machines 1061
Mining 1
Office-equipment 3
Other-machines 64
Packaging-machines 225
Pharmaceutical-and-cosmetics 15
Plastics-processing-machines 179
Printing-machines 64
Process-equipment-and-chemistry 167
Packaging-material-machinery 72
Robotics 37
Surplus-goods 5
Textile-machinery 90
Utility-vehicles 5
Woodworking-machines 91