Surface Grinding Machine

Hahn & Kolb HK-ORION 635 NPC-K

Germany

unknown

used

on request

INNO31562

Number of axes: 3, operating hours: unknown, with control system, belt filter, and extraction unit, without documentation or spare parts, not maintained on a regular basis, without maintenance records. An on-site inspection is possible.

more

Die Casting Machine

Frech DAK 315

Germany

1996

used

on request

INNO31561

Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: 0/-80/-160mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible.

more

Milling Machine

Mikron WF 32CH/ TNC 355

Germany

unknown

used

on request

INNO31558

X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible.

more

Vertical 5-Axis CNC Machining Center

Kao Fong Machinery KFO-620-5AX

Germany

2019

used

on request

INNO31556

X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible.

more

CNC Milling Machine

Friedrich Deckel FP4 AT

Germany

1987

used

on request

INNO31545

Number of T-slots: 8, rated current: 23A, controls: CONTOUR 3, with tool magazine. An on-site inspection is possible.

more

Line Drilling Machine

Ibarmia B-70

Germany

unknown

used

on request

INNO31539

Speed range: 51-966rpm, feeds: 0.30-0.60mm/rev, number of drilling heads: 3, spindle mount: MK5, with coolant unit, electromagnetic feed clutch, multi-speed gearbox, T-slot clamping plate, motorized height-adjustable heads and automatic spindle feed, without documentation. An on-site inspection is possible.

more

Vertical CNC Machining Center

Fair Friend Enterprise Co. VB715A FEELER

Germany

2003

used

on request

INNO31538

Number of axes: 3, max. speed: 6000rpm, compressed air connection: 6-8bar, main motor power: 20HP, control system: Fanuc Series 18-M, weight: 12t, without documentation. An on-site inspection is possible.

more

Laser Welding System

Trumpf TruLaser-Robot 5020

Germany

2007

used

on request

INNO31537

Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 36.HL22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible.

more

CNC Slant-Bed Lathe

Oerlikon Boehringer VDF 250 C-U

Germany

1985

used

on request

INNO31532

Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.

more

Hydraulic Plate Shear

Gebr. Steiner Kg HTS 40/20 RA

Germany

1984

used

on request

INNO31530

Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line limit, with documentation. An on-site inspection is possible.

more

CNC Slant-Bed Lathe

Oerlikon Boehringer VDF 180

Germany

1984

used

on request

INNO31528

Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible.

more

CNC Milling Machine

Haas TM-1H

Germany

2006

used

on request

INNO31527

Number of axes: 3, table dimensions: 1210x267mm, max. spindle speed: 4000rpm, weight: approx. 2t. An on-site inspection is possible.

more

Roller Leveller

Dalcos Richtanlage 1500

Germany

2013

used

on request

INNO31526

Offered is a precision sheet metal straightening machine. Material width: 1500mm, material thickness: 1-2mm, suitable for: aluminum, control: Siemens Simatic OP177B. Equipped with roller conveyor discharge frame. Additionally available spare parts: Siemens Control Unit 24V DC (6SL3040-1NB00-0AA0), Siemens compact asynchronous motor 15kW (1PH7133-2DF02-0BA0), Siemens synchronous servo motor (1FK7042-5AK71-1KG0), Siemens Sinamics Basic Line Module (6SL3130-1TE22-0AA0), Siemens Simatic Panel OP177B, INA cam rollers. Weight: approx. 6700kg, overall dimensions X/Y/Z: approx. 2400mm/1600mm/1800mm. Inspection possible by arrangement.

more

Mitre Saw

Elumatec MGS 245/00

Germany

2002

used

on request

INNO31524

Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement.

more

Section Shear

Peddinghaus 210/3

Germany

unknown

used

on request

INNO31514

Punching capacity steel: 25x16mm, material strength: 45/60/80kg/mm² depending on hole diameter, angle steel 90°: 110x10mm, angle steel 45°: 90x9mm, T-steel 90°: 110x10mm, T-steel 45°: 90x9mm, U and I profiles: up to NP/IPE 18, round steel diameter: 42mm, square steel: 38x38mm, max. sheet thickness for notching: 12mm, notching width: 50mm. An on-site inspection is possible.

more

CNC Lathe

Emco EMCOTURN 465

Germany

1996

used

on request

INNO31513

Offered is a slant bed CNC lathe. Bar capacity: 65mm, travel X/Z: 160mm/510mm, control system: Siemens Sinumerik. Equipped with bar loading magazine. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 2800mm/1800mm/1900mm. Inspection possible by arrangement. Expected to be available starting February 2027.

more

Center Lathe

Vöest 190

Germany

unknown

used

on request

INNO31512

Offered is a conventional lathe. Center height: 190mm, swing diameter over bed: 380mm, speed range: 27-1000rpm, speed stages: 12, thread types: metric, Whitworth, module, feeds: Norton gearbox, spindle mount: bayonet, operation: manual, control system: manual. Equipped with 3-jaw chuck, chuck guard with safety screen, four-position tool holder, lead and feed screw cover. Weight: approx. 1200kg, overall dimensions X/Y/Z: approx. 2000mm/1000mm/1300mm. Inspection possible by arrangement.

more

Cylindrical Grinding Machine

Wmw Bwf SJW 5

Germany

1985

used

on request

INNO31511

Offered is a conventional cylindrical grinding machine. Set to ZRO 40.10, protection class: IP54/IP32, control system: Erfurt electronic. Equipped with integrated control cabinet, workpiece feed system, separate control panel, coolant system. Weight: approx. 380kg, overall dimensions X/Y/Z: approx. 2500mm/1800mm/2000mm. Inspection possible by arrangement.

more

Internal Grinding Machine

Roweig SI6/2 AG-FM357x315

Germany

2009

used

on request

INNO31510

Offered is a precision internal grinding machine. Grinding range: max. Ø 357mm x 315mm, control system: CNC control system. Equipped with full enclosure, workpiece spindle head, grinding spindle carrier, separate control cabinet, extraction pipe routing. Weight: approx. 5200kg, overall dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm. Inspection possible by arrangement.

more

Washing Machine

Mea LT 650

Germany

1999

used

on request

INNO31509

Offered is a continuous parts cleaning system for metal parts. Control system: conventional. Equipped with conveyor belt, integrated filter and pump units, control cabinet, steam damage extraction blower. Weight: approx. 1800kg, overall dimensions X/Y/Z: approx. 4500mm/1600mm/2100mm. Inspection possible by arrangement.

more

All Offers / Metal processing machines