▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [341 - 360 of 1080]

CNC 5-Axis Machining Centre

Mazak Varuaxis 630-5X II T

Germany

2010

used

on request

INNO30414

Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

Tool Grinding Machine

Schneeberger Quicksharp

Germany

unknown

used

on request

INNO30413

A sharpening machine / regrinding machine is offered. Viewing possible by arrangement.

Hydraulic Press Brake

Mengele D 200-32

Germany

1978

used

on request

INNO30411

An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement.

Eccentric Press

Knuth KEX 100

Germany

1992

used

on request

INNO30409

An eccentric press / punching press year approx. 1992 is offered. Viewing is possible by arrangement.

Convection Oven

Nabertherm N500/45A

Germany

2001

used

on request

INNO30405

Max. operating temperature: 450°C, number of fans: 1, fan power: 0.75kW, power loss: 8kW, voltage: 400V, phases: 3, frequency: 50Hz, power supply: 26/26/32A, connected load: 18kW, control panel: Program Controller C40. With full documentation. The oven is in good condition, has been inspected regularly, and was in operation until recently. An on-site inspection is possible.

Guillotine Shear

Ed. Paskowsky S.a. ECLAIR ASS 4MM

Germany

1980

used

on request

INNO30403

Cutting length: 2520 mm, cutting thickness: 4 mm, voltage: 380 V, power connection: 16 A. The blades of the shears are likely no longer able to be sharpened due to wear and tear and would need to be replaced. On-site inspection is possible.

Wire Straightening Machine

Germany

1990

used

on request

INNO30390

Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement.

Metal 3D printing system

Nikon Slm Solutions SLM280 2.0 Single 700W

Germany

2022

used

on request

INNO30386

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement.

Milling machine

Maho MH 800

Germany

unknown

used

on request

INNO30374

Offered is a milling machine from MAHO with Heidenhain TNC 121 control, table X/Y 1000mm/600mm, SK40 tool holder, 3526h. Operating manual is available. Inspection is possible by appointment.

Vertical Milling Machine

Deckel Typ FP4NC

Germany

1987

used

on request

INNO30372

Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment.

Circular Knife Shear

Aryma KS 3.1000

Germany

1989

used

on request

INNO30371

A high-performance circular shear Aryma for series production of discs and rings made of sheet metal is available. Material thickness: 3mm, max. disc diameter: 150mm, max. square sheet disc diameter: 1000mm, max. octagonal disc diameter: 1250mm, cutting speed: 70m/min, cutting roller diameter: 70mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1750mm, weight: approx. 1500kg. An inspection on site is possible.

Drilling and Milling Machine

Optimum OptiMill MF 4V

Germany

2017

used

on request

INNO30370

Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement.

Continuous Cleaning Machine

Lpw PowerJet 670 T4-V Twin

Germany

2010

used

on request

INNO30366

Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible.

Horizontal Drilling and Milling Machine

Scharmann FB 100 Opticut

Germany

1970

used

on request

INNO30365

A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible.

CNC Machining Center

Röders RXP 300

Germany

2010

used

on request

INNO30364

Offered is a Röders RXP 300 high-speed machining center, year 2010, machine hours approx. 120648h, spindle hours approx. 71200h, HSK-25 high-frequency spindle 50000rpm, HG sensor, high-accuracy package incl. spindle cooling, Renishaw probe, bar magazine with 18 tool stations. An inspection is possible by appointment.

Internal Grinding Machine

Wotan SN 212/5R

Germany

1971

used

on request

INNO30363

A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible.

CNC Machining Center

Röders RXP 500

Germany

2005

used

on request

INNO30362

Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement.

Welding Robot

Cloos Romat 350

Germany

2004

used

on request

INNO30361

A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible.

Welding Robot

Cloos Romat 320

Germany

2004

used

on request

INNO30360

A fully overhauled automatic welding station Cloos from the year 2025 is available. Robot type: Romat 320, welding power source: GLC 353 MC3 R, control system: Rotrol II fibre optic, welding process: MIG. Load capacity: 15kg, robot axes: 6, reach: 3200mm, repeatability: +/-0.1mm, power: 25kVA, total weight: approx. 600kg. Documentation available. An on-site inspection is possible.

CNC Lathe

Kern D23 CNC

Germany

1990

used

on request

INNO30356

Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible.