▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [261 - 280 of 997]

Robot Welding Cell

Igm RTE 497-S

Germany

2021

used

on request

INNO29032

Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible.

Hydraulic Press Brake

Gwf H 100-2

Germany

1992

used

on request

INNO26811

Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm.

Flakkoting Machine

Profin BLUELINE HFM 1/2-R

Germany

2010

used

on request

INNO23597

Suitable for edge preparation of all types of cutting tools with the corresponding holders and turning devices, e.g. roll cutters turning devices, e.g. cylindrical milling cutters, saw blades up to 380mm diameter, shank tools, indexable inserts and saw band coils up to 750mm diameter. Number of units: 1, table pitch circle: 600mm, table outer diameter: 800mm, machining width/height: 180/ 250mm, feed rate: 0.5-6m/min, flakkotier power: 4kW, connected load: 6.4kW, length: 2500mm, width: 1950mm, height: 2500mm, weight: 3t, operational hours counter: approx. 100h. Including documentation, without accessories or spare parts. On-site inspection is possible.

Bar Loader

Kurt Breuning Irco SIMAG 80.1 U/3000-II

Germany

2022

used

on request

INNO29023

Guide channel sets for diameters: 22, 42, 47, 52, 62, 67, connected load: 2.4 kVA, weight: 1.8 tonnes. Featuring short changeover times, easy handling, maximum running smoothness, hydrodynamic bearings, 360° closed guide channels, reliable feeding of rotationally symmetrical profile material. The machine has only been used a little, an on-site inspection is possible.

Plate Shear

Durmazlar DHGM 4006

Germany

1996

used

on request

INNO29021

Working width: 41100mm, max. sheet thickness: 6mm, stroke: 131mm, stroke rate: 12/min, max. pressure: 150bar, oil tank capacity: 250l, control: ELGO Electric, motor power: 18.5kW, length: 4750mm, width: 2350mm, height: 1950mm, weight: 12t. On-site inspection is possible.

CNC Gear Grinding Machine

Bhs-hoefler SUPRA 1603

Germany

1989

used

on request

INNO26321

Max. table load: 8t, diameter table: 2000m, max. wheel diameter wheel: 720mm, pressure angle: 12.5-30°, max. bevel angle: 35°, diameter grinding wheel: 300mm/400m, peripheral speeds: 25 or 35m/s, grinding stroke: 750mm, number of teeth: 12-372, length: 6800mm, width: 5500mm, height: 3800mm, weight: 26t, was modernized in 2000 and equipped with CNC control, with documentation, on-site inspection is possible.

Double-Column Draw Press

Müller ZE 250/315

Germany

1978

used

on request

INNO29016

Pressing force: 3150kN, table dimensions: 1250x1100mm, table height: 750mm. Fully functional, last internal inspection: Q1/2025, UVV on Q2/2024. On-site inspection is possible.

Single-Column Eccentric Press

Müller Weingarten AR 100W

Germany

1969

used

on request

INNO29015

Press force cutting and drawing ram: 1000kN, table dimensions: 710x560mm, thickness of clamping plate: 90mm. Fully functional, last internal inspection: Q1/2025, UVV on Q2/2024. On-site inspection is possible.

CNC Turning- and Milling Center

Niles-simmons N30/2500 MC

Germany

2002

used

on request

INNO29009

With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300/ -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, turning lengths: 1500/2000/2500/3200/4000/4500/6500mm, swing diameter: 780/ 880mm, turning spindle bore: 92/123mm, main spindle speed range: 0-3000/0-3000/2000/min, max. Turning/milling unit speed: 5000/6000/10000/min, max. tool length: 900/600/1000/300/900mm, quill stroke: 160/170mm, connected load: 102kVA, control system: SINUMERIK ONE / SINUMERIK 840D sl, drive system control: SINAMICS S120, weight: 17t. On-site inspection is possible.

Laser Marking and Engraving Machine

Acsys PIRANHA I FL20SEP

Germany

2020

used

on request

INNO29008

Z-axis: 390mm, max. workpiece dimensions: 730x450x440mm, max. workpiece weight: 100kg, internal surface dimensions: 520x375mm, connected load: 3500W, length: 990mm, width: 690mm, height: 1600mm, weight: approx. 550kg. The machine is as good as new and fully functional, without cooling system. An inspection is possible.

CNC Tapping Center

Brother Industries TC-R2A

Germany

2006

used

on request

INNO28997

X-axis: 420mm, y-axis: 320mm, z-axis: 270mm, table dimensions: 500x300mm, spindle power: 7kVA, connected load: 20kVA, length: 1460mm, width: 2450mm, height: 3130mm, weight: 2.9t. The machine is defective and needs overhauling, on-site inspection is possible.

Mitre Saw

Kaltenbach SKL 450 NA

Germany

2007

used

on request

INNO28996

Saw blade diameter: 450mm, cutting range 90° round/ square/ profiles: 160/ 145/ 320x50mm, cutting range 45° round/ square/ profiles: 160/ 130/ 250x40mm, cutting speed: 1950/ 3900m/min, feed speed: 0-3000mm/min, mitre range: 0° to 90°, swivel range: 180°, weight: approx. 1.5t. On-site inspection is possible.

CNC Vertical Lathe

Hessapp DV90/1000

Germany

1988

used

on request

INNO28993

Center height: 420mm, turning length: 600mm, orbital diameter over bed/face slide/in the offset: 900mm/1150mm/800mm, max. workpiece weight: 2500kg, spindle diameter in front bearing: 203mm, face plate diameter: 800mm, max. torque: 8000Nm, spindle bore: 100mm, max. chuck diameter: 1150mm. Bed slide longitudinal stroke: 600mm, face slide face stroke: 600mm, feed X/Z: 5m/min, speed: 710rpm. Machine weight: approx. 15000kg, control: Siemens Sinumerik System 3, repairs carried out: Cross slide (2022), guideways/wedge power, control components, main spindle motor, wiper (annually), V-belts and ball screws. Including dry casting machining (without cooling lubricant system), hydraulic unit, automatic door and chip conveyor. Documentation available. On-site inspection is possible.

Lathe

Contur SJ 460x1000

Germany

2010

used

on request

INNO28977

Turning diameter over bed/face slide/crank: 460mm/258mm/785mm, center width: 1016mm, bed width: 300mm, spindle bore: 58mm, speed: 2000rpm, diameter lead screw/quill: 35mm/65mm, quill adjustment: 127mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1200mm, weight: approx. 1650kg. Documentation available. On-site inspection is possible. Expected to be available from the end of May 2025.

Surface Grinding Machine

Hahn & Kolb Orion 1255NC-K

Germany

1985

used

on request

INNO28975

A conventional precision surface grinding machine with NC control is available. Resolution: 0.001mm, travel X/Y/Z: 1200mm/550mm/400mm, table dimensions X/Y: 1600mm/450mm, table feed: 30m/min, max. table load: 750kg, spindle-table distance: 800mm, Y feed: 180mm/min, Y precision: 0.001mm, Z feed: 1200mm/min, Z precision: 0.3mm, speed: 2800rpm, grinding wheel dimensions X/Y/Z: 400mm/100mm/127mm. Machine dimensions X/Y/Z: approx. 6500mm/3000mm/2500mm, weight: approx. 6700kg. Documentation available. On-site inspection is possible.

CNC Milling Machine

Chiron FZ 22 L

Germany

1988

used

on request

INNO28974

Travel X/Y/Z: approx. 1600mm/400mm/425mm, table dimensions X/Y: 1500mm/400mm, tool holder: SK40, tool positions: 20, spindle speed: 5000rpm, machine dimensions X/Y/Z: approx. 4000mm/2500mm/2900mm, weight: approx. 7000kg, control: Siemens Sinumerik System 3, operating hours: approx. 19855h. Including approx. 12 tool holders. Documentation available. An on-site inspection is possible.

Welding Fume Extraction

Kaweha Air Champion

Germany

2006

used

on request

INNO28966

A Kaweha mobile welding fume extraction machine is available. Suction capacity: 1200m³/h, pressure increase: 2000Pa, motor power: 1.1kW, weight: approx. 125kg. Documentation available. On-site inspection is possible.

Column Drilling Machine

Wmw BS 50 AI

Germany

unknown

used

on request

INNO28965

Drilling capacity in steel: 50mm, spindle mount: MK5, speed: 1000rpm, throat depth: 355mm, drilling stroke: 280mm, spindle-table distance: 710mm, spindle-column distance: 355mm, table dimensions X/Y: 630mm/500mm, column diameter: 160mm. Machine dimensions X/Y/Z: 1200mm/800mm/2700mm, weight: approx. 1650kg. On-site inspection is possible.

Hydraulic Press

Wmw PYE 63 SS

Germany

unknown

used

on request

INNO28964

Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible.

Radial Drilling Machine

Wmw BR 40/2 x 1250

Germany

unknown

used

on request

INNO28963

Drilling capacity in steel/cast iron: 40mm/60mm, throat depth range: 300mm-1250mm, max. workpiece height: 745mm, spindle mount: MK5, spindle stroke: 355mm, speed: 1200rpm, feed: 756mm/min, column diameter: 300mm, spindle-plate distance: 280mm-1380mm, table dimensions X/Y: 1400mm/750mm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/2800mm, weight: approx. 3000kg. On-site inspection is possible.