Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
All Offers / Metal processing machines
Broaching and slotting and drawing machines 8 Deburring machines 3 Diecasting 3 Drilling 47 Engraving machines 2 Eroding machines 15 Forging attachments 2 Gear cutting machines 2 Grinding machines 96 Honing machines 2 Lapping machines 1 Lathes 152 Machining centers 93 Milling machines 111 Other machinery 26 Pipe and tube working machines 9 Planing machines 1 Polishing machines 1 Presses 89 Profile processing machines 2 Roller leveller 2 Saws 43 Sheet metal working 84 Stoves 34 Surface technology 33 Threading machines 1 Tools and accessories 3 Transfer machines 9 Welding and cutting 82 Window production machines 6 Wire industry machinery 22
Innovac used-machines Metal processing machines [1 - 20 of 984]
CNC-Lathe-Dmg-NEF-600 used
CNC Lathe
Dmg NEF 600
Germany
2011
used
on request
INNO30170
Swing diameter over bed/cross slide: 600mm/410mm, turning length: 1190mm, travel X/Z: 320mm/1250mm, speed: 3000rpm, spindle bore: 75mm, torque: 785Nm, tailstock taper: MK5, tool stations: 8, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5500kg, control: Siemens Sinumerik 840D powerline, operating hours: 22407h. Including conveyor and chip breaker. Documentation available. An on-site inspection is possible.
more
Stamping-and-Bending-Machine-Bihler-GRM-50 used
Stamping and Bending Machine
Bihler GRM 50
Germany
1999
used
on request
INNO30163
Product diameter range: 0.5mm-5mm, max. strip width: 40mm, max. feed length: 320mm, standard slide units: 4, stroke: 94mm, narrow slide units: 1, stroke: 70mm, center punch stroke: 52mm, max. pressing force: 250kN, eccentric press stroke: 16mm, max. stroke rate: 250strokes/min, max. output rate: 132pieces/min. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg, control system: Bihler. Documentation available. On-site inspection possible.
more
Convection-Oven-Nabertherm-N500-65HA used
Convection Oven
Nabertherm N500/65HA
Germany
2015
used
on request
INNO30162
A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible.
more
CNC-Horizontal-Drilling-and-Milling-Machine-Wotan-Rapid-5P used
CNC Horizontal Drilling and Milling Machine
Wotan Rapid 5P
Germany
1992
used
on request
INNO30160
A Wotan CNC horizontal boring and milling machine is available. Travel X/Y/Z: 8000mm/3500mm/1000mm, travel W/U: 700mm/1600mm, table dimensions X/Y: 8000mm/4500mm, plate fields: 2, rotary-shift table dimensions X/Y: 2500mm/2000mm, max. table load: 25000kg, spindle speed: 2000rpm, tool positions: 60, power: 63kW, control: Siemens Sinumerik 850M. Includes 4x 90° angle heads. Documentation available. An on-site inspection is possible.
more
CNC-Miling-and-Drilling-Machine-Schiess-Froriep-FB-225 used
CNC Miling and Drilling Machine
Schiess Froriep FB 225
Germany
1987
used
on request
INNO30159
A CNC travelling column boring and milling machine Schiess is available. Travel X/Y/Z: 10500mm/5000mm/1200mm, quill stroke: 1250mm, quill diameter: 225mm, speed: 750rpm, spindle power: 100kW, spindle torque: 18000Nm, tool holder: SK50/SK60. Machine dimensions: approx. 17000mm/11000mm/8400mm, controls: Siemens 850M. Without platen field. Documentation available. An on-site inspection is possible.
more
Grinding-Machine-J.-Jungers-wmw-rausch-L20-Gratomat-300-L used
Grinding Machine
J. Jungers/wmw/rausch L20/Gratomat 300 L
Germany
1967
used
on request
INNO30158
Two tool grinding machines from WMW and Jungers as well as one gear deburring and chamfering machine from Rausch are available. 1) Tool grinding machine J. Jungers L20. 2) Tool grinding machine WMW Gotha. 3) Deburring machine Rausch 300 L, year of manufacture: 1967, speed: 25000rpm. An on-site inspection is possible.
more
Center-Lathe-Nardini-ND22AE-1500 used
Center Lathe
Nardini ND22AE/1500
Germany
1987
used
on request
INNO30157
A conventional lead and feed screw lathe Nardini is available. Swing over bed/cross slide: 440mm/260mm, turning length: 1380mm, taper cylindricity over 100mm: 0.3mm, roundness: 0.03mm, runout: 0.03mm, squareness over 100mm: 0.05mm. An on-site inspection is possible.
more
CNC-Cycle-Lathe-Boehringer-VDF-DUS-560 used
CNC Cycle Lathe
Boehringer VDF DUS 560
Germany
1993
used
on request
INNO30156
Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible.
more
Heavy-Duty-Lathe-Ravensburg-KT-600 used
Heavy Duty Lathe
Ravensburg KT 600
Germany
1971
used
on request
INNO30155
A heavy face lathe Ravensburg is available. Center height: 600mm, faceplate diameter: 800mm, turning diameter over bed/cross slide: 900mm/1200mm, max. turning length: 600mm, max. workpiece weight: 350kg, weight: approx. 6100kg. An on-site inspection is possible.
more
Gear-Shaping-Machine-Lorenz-S360 used
Gear Shaping Machine
Lorenz S360
Germany
1965
used
on request
INNO30154
A vertical gear shaping machine Lorenz is available. Module: 6.5, stroke: 120mm, max. gear diameter: 900mm, max. workpiece weight: 180kg, min. concentricity: 0.1mm, min. squareness: 0.05mm, roundness: 0.1mm. An on-site inspection is possible.
more
Gear-Hobbing-Machine-Liebherr-L-1202 used
Gear Hobbing Machine
Liebherr L 1202
Germany
1982
used
on request
INNO30153
Cutter speed: 250rpm, max. machinable module: 16/DP1.5, max. workpiece diameter: 1250mm, table diameter: 1100mm, indexing gear diameter: 987mm, workpiece bore: 250mm, workpiece insertion depth: 525mm, min. cutter adjustment above table: 390mm, cutter slide travel: 1000mm, rapid traverse: 800mm/min, max. table load: 8000kg, weight: approx. 21000kg. Documentation available. An on-site inspection is possible.
more
Center-Lathe-Boehringer-M670 used
Center Lathe
Boehringer M670
Germany
1982
used
on request
INNO30152
A conventional screw-cutting lathe Boehringer is available. Swing over bed/cross slide: 690mm/415mm, distance between centers: 1500mm, cylindricity deviation (tapered) over 100mm: 0.15mm, roundness deviation: 0.02mm, total runout: 0.02mm, perpendicularity deviation over 200mm: 0.05mm, chuck diameter: 630mm-700mm. An on-site inspection is possible
more
CNC-Turret-Lathe-Dörries-CTE-160 used
CNC Turret Lathe
Dörries CTE 160
Germany
1978
used
on request
INNO30151
A Dörries CNC vertical turning lathe is available. Faceplate diameter: 1600mm, turning diameter: 1800mm, turning height: 1500mm, max. travel: 1200mm, faceplate speed: 200rpm. Machine dimensions X/Y/Z: approx. 8400mm/4500mm/5300mm, weight: approx. 25000kg, control system: R&D. The machine’s electrical system and control were completely overhauled in 2010 by R&D Steuerungstechnik. Documentation available. An on-site inspection is possible.
more
Punch-Press-Ebu-HK-80-FR used
Punch Press
Ebu HK 80 FR
Germany
2016
used
on request
INNO30150
Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.
more
CNC-Lathe-Emag-VL-2 used
CNC Lathe
Emag VL 2
Germany
2018
used
on request
INNO30148
A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 18kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, operating hours: approx. 28487h, spindle hours: 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck, and measuring probe. Documentation available. On-site inspection possible.
more
CNC-Machining-Center-Micromill-Challenger-MM430 used
CNC Machining Center
Micromill Challenger MM430
Germany
2012
used
on request
INNO30147
Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible.
more
Double-Mitre-Saw-Mange-Jixie-MG-841 used
Double Mitre Saw
Mange Jixie MG-841
Germany
2012
used
on request
INNO30146
A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.
more
Lathe-Weiler-MDU-260 used
Lathe
Weiler MDU 260
Germany
1977
used
on request
INNO30143
A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible.
more
Upright-Drilling-Machine-Snow-TA-3-S-TA-3 used
Upright Drilling Machine
Snow TA-3-S/TA-3
Germany
unknown
used
on request
INNO30139
Two similar Snow column drilling machines are available. 1) Snow TA-3, speed: 700rpm, table dimensions X/Y: 460mm/270mm, vertical table adjustment: 255mm, spindle taper: MK1. 2) Snow TA-3-S, speed: 1000rpm, table dimensions X/Y: 460mm/270mm, spindle taper: MK1. An on-site inspection is possible.
more
CNC-Machining-Center-Alzmetall-GX-1000-5-FDT used
CNC Machining Center
Alzmetall GX 1000/5 - FDT
Germany
2008
used
on request
INNO30138
A CNC 5-axis portal machining center Alzmetall with milling-turning table is available. Travel X/Y/Z: 800mm/800mm/600mm, B-axis swivel: +/-120°, C-axis rotation: 360°, table diameter: 630mm, max. table load: 1000kg, tool holder: HSK-A63, spindle speed: 12000rpm, tool positions: 33, max. workpiece diameter: 90mm/125mm, max. tool length: 300mm, max. tool weight: 8kg, rapid traverse: 60m/min, feed rate: 30m/min. Machine dimensions: approx. 3700mm/3000mm/3200mm, weight: approx. 15500kg. Documentation available. An on-site inspection is possible.
more
Innovac used machines from Germany Our Program
Agricultural-machines 2
Automation-technology 63
Beverage-filling-technology 25
Complete-production-lines 1
Construction-machinery 24
Energy-management 123
Food-processing-and-beverage 131
Material-storage 65
Materials-handling-technology 62
Measurement-and-testing 64
Medical-equipment 6
Metal-processing-machines 984
Mining 3
Office-equipment 2
Other-machines 66
Packaging-machines 213
Pharmaceutical-and-cosmetics 17
Plastics-processing-machines 182
Printing-machines 75
Process-equipment-and-chemistry 156
Packaging-material-machinery 70
Robotics 36
Surplus-goods 5
Textile-machinery 93
Utility-vehicles 9
Woodworking-machines 87