Used Metal processing machines from Germany

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [1 - 20 of 761]

CNC Laser Cutting Machine

Trumpf Trumatic L 3050

Germany

2003

used

on request

INNO27014

Laser power: 5kW, laser type: CO2, working range X/Y/Z: 3000mm/1500mm/115mm, max. sheet thickness steel/stainless steel/aluminum: 25mm/20mm/10mm, operating hours: 85617h, laser hours: 82879h, beam hours: 51992h. Dimensions X/Y/Z: 8800mm/4800mm/2400mm, weight: approx. 15000kg. Including 7.5 inch cutting head. Documentation available.

Band Saw

Kaltenbach KB 380 NA

Germany

1998

used

on request

INNO27010

Working width: 380mm, max. angle adjustment: 180°, cutting speed: 96m/min, dimensions X/Y/Z: 3100mm/2200mm/1850mm, weight: 3100kg. Without infeed and outfeed roller conveyor. Including 10 originally packed saw bands.

Wire EDM Machine

Fanuc Robocut Alpha-1iB

Germany

2002

used

on request

INNO27009

Travel X/Y/Z/U/V: 550mm/370mm/310mm/120mm/120mm, rapid traverse X/Y/Z/U/V: 900mm/900mm/900mm/450mm/450mm, max. workpiece weight: 1000kg. Weight: approx. 3000kg, dimensions X/Y/Z: approx. 2700mm/2400mm/2100mm. The guides must be replaced as they no longer erode exact circles.

CNC Machining Center

Hommel Unverzagt UVA 725 Plus

Germany

2010

used

on request

INNO27008

Travel X/Y/Z: 725mm/460mm/460mm, speed: 10000rpm, tool holder: SK40, tool magazine: 24 places, max. tool diameter/length: 100mm/300mm, max. tool weight: 7kg, tool change time: 2s, table dimensions X/Y: 760mm/420mm, max. table load: 400kg. Dimensions X/Y/Z: approx. 2200mm/2100mm/2300mm, weight: approx. 3600kg, control: Heidenhain TNC 620. Defects: Compact inverter with integrated controller and PLC, door switch, both work area lamps, X-axis ball screw and roller bearings. Including chip conveyor. Documentation available. On-site inspection is possible.

CNC EDM-Machine

Charmilles Robofil 440

Germany

2001

used

on request

INNO27006

Travel X/Y/Z/U/V: 550mm/350mm/400mm/550mm/350, wire diameter: 0.25mm, max. workpiece dimensions X/Y/Z: 1200mm/700mm/400mm, max. workpiece weight: 1500kg, taper cutting: +/-30°. Dimensions X/Y/Z: approx. 2800mm/2600mm/2100mm, weight: approx. 3250kg, control: Charmilles Millennium 2. On-site inspection is possible.

Milling Machine

Wmw FUW250/IV

Germany

unknown

used

on request

INNO27005

Table size X/Y: 630mm/345mm, table clamping surface X/Y: 700mm/300mm, travel X/Y/Z: 400mm/250mm/300mm, spindle mount: SK40, speed: 2240rpm, feed X/Y/Z: 1250mm/min, distance spindle-table: 400mm, quill stroke: 80mm, drive power: 5.5kW. Dimensions X/Y/Z: approx. 2300mm/2650mm/2300mm, weight: approx. 1700kg. On-site inspection is possible.

Hydraulic Press

Wanzke HVZ 160/S

Germany

1998

used

on request

INNO26995

Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available.

CNC 5-Axis Machining Centre

Grob BZ 500

Germany

2004

used

on request

INNO26993

Travel X/Y/Z: 630mm/630mm/500mm, speed: 15000rpm, table size X/Y: 500mm/500mm, max. workpiece height: 930mm, max. workpiece weight: 800kg, spindle type: HSK63, spindle motor: 32kW, tool positions: 180, dimensions X/Y/Z: approx. 5500mm/4000mm/4000mm, weight: approx. 16000kg. Including tools, hydraulic unit. Defects: Gearbox, drive motor, energy chains. Documentation available.

Punching Machine

Bruderer BSTA 41

Germany

1980

used

on request

INNO26989

Press force: 400kN, stroke rate: 100-1200H/min, stroke adjustment: 13mm/15mm/19mm/25mm/32mm/38mm/44mm/51mm/57mm, max. fixed stroke: 57mm, ram adjustment: 57mm, installation opening: 690mm, max. belt passage width: 190mm, belt running height: 60mm-140mm, bed opening: 640mm-220mm. Dimensions X/Y/Z: approx. 3000mm/2200mm/1700mm, weight: approx. 6100kg. Documentation available. On-site inspection is possible.

CNC 4 Axis Machining Centre

Stama MC 526 Compact

Germany

2007

used

on request

INNO26987

Travel X/Y/Z: 1000mm/400mm/360mm, speed: 12000rpm, feed X/Y/Z: 10000mm/min, rapid traverse X/Y/Z: 45m/min, feed force X/Y/Z: 4000N/4000N/8000N. Spindle bearing diameter: 65mm, max. tool diameter/length: 125mm/250mm, tool holder: HSK63, max. torque: 60Nm, max. milling capacity: 350cm³, max. drilling diameter: 32mm, max. thread diameter: M30. Dimensions X/Y/Z: approx. 3600mm/3800mm/3300mm, weight: approx. 6100kg, control: Fanuc 18i MB. Hydraulic unit included. Documentation available. An on-site inspection is possible.

CNC 4 Axis Machining Centre

Stama MC 526 Compact

Germany

2007

used

on request

INNO26986

Travel X/Y/Z: 1000mm/400mm/360mm, speed: 12000rpm, feed X/Y/Z: 10000mm/min, rapid traverse X/Y/Z: 45m/min, feed force X/Y/Z: 4000N/4000N/8000N. Spindle bearing diameter: 65mm, max. tool diameter/length: 125mm/250mm, tool holder: HSK63, max. torque: 60Nm, max. milling capacity: 350cm³, max. drilling diameter: 32mm, max. thread diameter: M30. Dimensions X/Y/Z: approx. 3600mm/3800mm/3300mm, weight: approx. 6100kg, control: Fanuc 18i MB. Hydraulic unit included. Documentation available. An on-site inspection is possible.

Plate Shear

Eht TSS 4-60

Germany

1999

used

on request

INNO26985

Cutting length: 6000mm, max. material thickness: 4mm, blade length: 6000mm, passage from side stop to front stop: 200mm, top blade cutting angle: 1°, backgauge range: 10mm-1000mm, max. adjustment speed: 70mm/s. Dimensions X/Y/Z: approx. 6800mm/3500mm/2300mm, weight: approx. 21000kg. An on-site inspection is possible.

Eccentric Press

Colombo Agostino 110.B.350

Germany

1991

used

on request

INNO26982

Press force: 3500kN, table dimensions X/Y: 1000mm/800mm, lateral passage width: 560mm, stroke: 200mm, installation height: 460mm, stroke rate: 25-75strokes/min, ram adjustment: 160mm, weight: 23000kg. On-site inspection is possible. Available from July 2024.

CNC 5-Axis Machining Centre

Heller MCH 450

Germany

2008

used

on request

INNO26979

Travel X/Y/Z: 1600mm/1500mm/1250mm, table dimensions X/Y: 800mm/1000mm, round pallet storage: 4+1 with clamping hydraulics, speed: 6000rpm, feed X/Y/Z: 40000mm/min, rapid traverse X/Y/Z: 40000mm/min, max. workpiece weight: 2500kg, tool magazine: 405 places/SK50/set-up station. Including 70bar high-pressure coolant system, emulsion mist extraction system. On-site inspection is possible. Available from January 2025.

Pipe Forming Machine

Wecotech Wecomatic-IO

Germany

2007

used

on request

INNO26978

Tube diameter min./max.: 20mm/200mm, forming length: 100mm, max. tube thickness: 4mm, axial stroke diameter/length: 100mm/150mm, forming stroke of the inner tool: max. Ø 36mm, external radial stroke diameter/length: 70mm/60mm, internal and external swivel range: 67.5°, cycle time: approx. 12s. Dimensions X/Y/Z: approx. 2200mm/1200mm/1700mm, weight: approx. 1700kg.

Laser Punch Press

Trumpf Trumatic 500

Germany

2000

used

on request

INNO26962

Press: Press force: 220kN, max. stroke: punching: 1350/min, marking: 3000/min, working range X/Y (punching): 3050mm/1550mm, max. sheet thickness: 8mm. Laser: Power: 6000W, max. sheet thickness (mild steel): 6mm, max. sheet thickness(stainless steel): 6mm, max. sheet thickness(aluminum): 5mm. Tools and automation: MultiTool change time: 0.3s, number of tools/clamps: 21/4, max. workpiece weight: 280kg. Dimensions X/Y/Z: approx. 7600mm/8200mm/2100mm, weight: approx. 11050kg, operating hours: 28128h. Documentation available.

Angular Window Machining Centre

Weinig Unicontrol 10

Germany

1998

used

on request

INNO26960

An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available.

CNC Turn and Mill Complete Machining Center

Weingärtner Rotomill

Germany

2002

used

on request

INNO26955

Center width: 7000mm, diameter over bed: 650mm, tool storage: 40 places, control: Siemens 840D.

Vertical CNC Machining Center

Deckel Maho DMU 80

Germany

1999

used

on request

INNO26956

Travel X/Y/Z: 800mm/700mm/600mm, speed: 18000rpm, feed X/Y/Z: 10000mm/min, control: Heidenhain MillPlus, dimensions X/Y/Z: approx. 4500mm/330mm/2600mm, weight: approx. 9500kg.

Powder Coating Cabin

Gema StandardClassic

Germany

2015

used

on request

INNO26948

Inlet pressure min./max.: 6bar/10bar, recommended inlet pressure: 7bar, max. compressed air water vapor content: 1.3g/³, max. compressed air oil content: 0.1mg/kg. Max. Compressed air consumption with collection container/fluidized powder trolley: 12m³/h / 47m³/h, manual coating opening X/Y: 1300mm/1300mm, number of filter elements: 3, filter area: 29.25m². Exhaust air volume initial/working area: 3200m³/h / approx. 2650m³/h, powder capacity with collection container/fluidized powder trolley: 80l/30l, dimensions X/Y/Z: 1500mm/2758mm/2100mm. Documentation available.