▷ Używane maszyny włókiennicze z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Maszyny włókiennicze

Barwiarnie 1 Dziewiarki 5 Dziewiarki osnowowe 3 Hafciarki 1 Inne maszyny 37 Maszyny do cięcia 10 Maszyny do prasowania 3 Maszyny do szycia 12 Maszyny drukarskie 1 Maszyny peryferyjne 7 Maszyny tkackie 3 Maszyny wykrawające 6 Stelaż napinający 3

Innovac maszyny-uzywane

Maszyny włókiennicze [1 - 20 of 92]

Stół do prasowania

Veit Varioset

Niemcy

2013

używany

na żądanie

INNO31838

Various Veit ironing tables including Reverberi steam generators are available. 1) 7x Veit Varioset flat ironing table, ironing surface: 1300mm/650mm, height adjustment range: 830mm-990mm, weight: approx. 120kg. 2) 5x Veit pointed ironing table, ironing surface: 1100mm/380mm, weight: approx. 120kg. 3) 3x Reverberi GAK5DP steam generator, year of manufacture: 2013, version: Duplex, heating capacity: 5kW, operating pressure: 3bar. In addition, two steam generators and one flat ironing table are included as defective units. Documentation available. An on-site inspection is possible. Sale only as one complete package.

Maszyna do igłowania

Dilo OD-II HVL 55 / OUG-II S50 / OD-II 55

Niemcy

2000

używany

na żądanie

INNO31776

3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment.

Maszyna do napełniania łódeczek

Saurer PitStop

Niemcy

2002

używany

na żądanie

INNO31745

Offered is an automatic Saurer shuttle filling station for automatic emptying, filling, threading and adjustment of embroidery shuttles. Operating pressure: approx. 6bar, Capacity: approx. 144cycles/h, Magazine capacity: 100, Air consumption: 150Nl/min, Precision of the electronic bobbin thread tension measurement: 0.1mN, Control system: PLC. Machine dimensions X/Y/Z: approx. 3170mm/1100mm/1900mm. Inspection by appointment possible.

Linia do układania i cięcia

Bullmerwerk/wastema Komet II / ESV20 - 160

Niemcy

1985

używany

na żądanie

INNO31708

A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement.

Maszyna do składu

Nagel + Hermann Posmatic

Niemcy

nieznany

używany

na żądanie

INNO31672

Four Nagel + Hermann transfer and setting machines for transfer motifs (rhinestone, hotfix or similar) are available. Production capacity: 3000elements/h, max. element size range: 2mm-8mm, rhinestone format: SS10-20, machine dimensions X/Y/Z: approx. 850mm/600mm/1000mm, weight: approx. 65kg. Including various spare parts and tools. Documentation available. An on-site inspection is possible.

Maszyna do nakładania transferów z kryształkami

Nagel + Hermann Sheet-Libero Basic

Niemcy

nieznany

używany

na żądanie

INNO31671

A Nagel + Hermann transfer and placement machine for transfer motifs (rhinestone, hotfix or similar) is available. Colors: unlimited, shapes: unlimited, production capacity: 5000elements/h, max. motif dimensions X/Y: 300mm/300mm, machine dimensions X/Y/Z: approx. 820mm/650mm/650mm, weight: approx. 120kg. Including PC notebook, CAD software, 4x conveyor plates, 2x mounting plates as well as various spare parts and tools. Documentation available. An on-site inspection is possible.

Maszyna do nakładania transferów z kryształkami

Nagel + Hermann Libero A

Niemcy

nieznany

używany

na żądanie

INNO31670

Four identical Nagel + Hermann transfer and placement machines for transfer motifs (rhinestone, hotfix or similar) are available. Colors: 6, shapes: 2, production capacity: 5000elements/h, machine dimensions X/Y/Z: approx. 2000mm/1050mm/1750mm, weight: approx. 320kg. Including PC, CAD software, 12x conveyor plates as well as various spare parts and tools. Documentation available. An on-site inspection is possible.

Maszyna do nakładania transferów z kryształkami

Nagel + Hermann Libero B

Niemcy

nieznany

używany

na żądanie

INNO31669

Two identical Nagel + Hermann transfer and setting machines for transfer motifs (rhinestone, hotfix, or similar) are available. Colors: 6, shapes: 2, production output (2-color): 8000elements/h, feed bowl diameter: 200mm. Machine dimensions X/Y/Z: approx. 2450mm/1100mm/1800mm, weight: approx. 400kg. Including PC, CAD program, 8x feed plates, 22 feed bowls, 4 rotary tables, as well as various spare parts and tools. Documentation available. An on-site inspection is possible.

Maszyna do nakładania transferów z kryształkami

Nagel + Hermann Libero C4

Niemcy

nieznany

używany

na żądanie

INNO31668

Three identical Nagel + Hermann transfer and placement machines for transfer motifs (rhinestone, hotfix or similar) are available. Production capacity: 7000elements/h, round element diameter: 2mm/3mm/4mm/5mm/6mm/8mm. Including laptop, CAD software, feed plate, various tools and spare parts. Documentation available. An on-site inspection is possible.

Dziewiarka

Karl Mayer Raschel RSE 4-1

Niemcy

2022

używany

na żądanie

INNO31652

Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible.

Maszyna do spieniania produktów

Wilhelm Krögel

Niemcy

1990

używany

na żądanie

INNO31615

A fabric inspection machine is offered. Working width: approx. 2000mm, display: digital length counter, inspection table: integrated backlight, control: conventional via control cabinet, function: winding, unwinding and inspecting fabric webs, control: conventional. Equipped with illuminated transmission screen, digital meter counter, control cabinet with push-button control, guide and winding rollers. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 2800mm/1600mm/1900mm. Inspection possible by arrangement.

Prasa do prasowania

Dücker K.-g. UWPV

Niemcy

nieznany

używany

na żądanie

INNO31612

An industrial ironing machine is offered. Ironing table length: approx. 2000mm, heating capacity: 2400W, motor power: 2kW, motor speed: 1400rpm, control: electromechanical. Equipped with steam generator, textile support surface. Overall dimensions X/Y/Z: approx. 2800mm/1200mm/1600mm. Inspection possible by arrangement.

Tufting maszynowy

Tuftco Corp. SUPER SOUTHERN II Continental

Niemcy

nieznany

używany

na żądanie

INNO31605

High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible.

Maszyna do robienia koronek

Krenzler SKZ 8E-52H/SKZ 8E-64H

Niemcy

2000

używany

na żądanie

INNO31585

A complete braiding line with peripheral devices and a total of twelve Krenzler braiding machines is available. 1) 7x Krenzler SKZ 8E/54H braiding machine, years of manufacture: 2002-2004, control: Krenzler SmartCard, number of carriers: 52, max. working speed: 240rpm, weight: approx. 750kg. 2) 5x Krenzler SKZ 8E/62H braiding machine, years of manufacture: 2000-2005, number of carriers: 64, max. working speed: 240rpm, weight: approx. 1000kg. 3) Herzog SP 280E winding machine, year of manufacture: 2018, winding positions: 4, max. spindle speed: 3300rpm, bobbin diameter range: 39mm-120mm, bobbin width range: 1100mm-280mm. Including 76x mandrels and flanges, approx. 2000 bobbins, approx. 700 carriers, 545 production cards, Mirage software, collection books and sample inventory. Documentation available. An on-site inspection is possible.

Maszyna do naciągania pokrowców na materace

Somaritec SKM-700

Niemcy

2021

używany

na żądanie

INNO31576

The machine is designed for foam mattresses, the cores to be processed can also be wrapped with wadding fleece or tricot material, mattress dimensions: 100 to 780x100 to 200mm, compressed air connection: 6 to 8bar, connected load: 1.5kW, weight: 850kg, operating hours reading: 10h, with control system and roller conveyor table. An inspection on site is possible.

Prasa do utrwalania w trybie ciągłym

Kannegiesser CV-700C

Niemcy

2012

używany

na żądanie

INNO31518

Continuous fusing press for sale. Working width: 700mm, factory overhauled: April 2012, control: PLC control. Equipped with infeed conveyor, discharge conveyor. Weight: approx. 650kg, overall dimensions X/Y/Z: approx. 3350mm/1250mm/1200mm. Inspection possible by appointment.

Automatyczna maszyna do szycia dziurek

Dürrkopp Adler 579-112

Niemcy

2005

używany

na żądanie

INNO31515

Offered is an automatic buttonhole sewing machine. Needle system: System 579, classification: 0579 990004, control: integrated control. Equipped with mobile table frame, foot pedal, thread stand, workplace lighting. Weight: approx. 120kg, overall dimensions X/Y/Z: approx. 1060mm/750mm/1500mm. Inspection possible by arrangement.

Maszyna do spieniania produktów

Unglaub UW 19C

Niemcy

1997

używany

na żądanie

INNO31395

A low-tension fabric inspection and shearing machine Unglaub with newly covered transport rollers is available. Working width: 1900mm, material thickness range: 0.2mm-3mm, max. inspection material speed: 40m/min, inspection material groups: I-IV. Documentation available. An on-site inspection is possible.

Kalander

Klieverik GTC81-3400

Niemcy

2005

używany

na żądanie

INNO31366

A Klieverik roll-to-roll sublimation and transfer printing calendar is available. Media width: 3200mm, max. working width: 3200mm, heating cylinder diameter: 195mm, max. temperature: 220°C, process speed: 1.25m/min, production capacity: approx. 135m²/h. Machine dimensions X/Y/Z: approx. 4150mm/1200mm/1550mm, weight: approx. 1900kg. Documentation available. An on-site inspection is possible.

Dziewiarka płaska

Stoll CMS

Niemcy

nieznany

używany

na żądanie

INNO31327

Various flat knitting machines with different gauges and Groz-Beckert needle sets are available. 1) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 2) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 3) Stoll CMS 303 TC, gauge: E12, nominal width: 1270mm, needle set: 12. 4) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 5) Stoll CMS 340 TC, gauge: E12, needle set: 12. 6) Stoll CMS 411, gauge: E10, needle set: 10. 7) Stoll CMS 422 TC, gauge: E12, needle set: 12. 8) Stoll CMS 422 TC, gauge: E12, needle set: 12. 9) Stoll CMS 422.6, gauge: E12, needle set: 10. 10) Stoll CMS 422.6, gauge: E12, needle set: 10. 11) Stoll CMS 422.6, gauge: E14. 12) Stoll CMS 422.6, gauge: E14. 13) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 12. 14) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 10. 15) Stoll CMS 430.6, gauge: E12. 16) Stoll CMS 922, gauge: E12, needle set: 12. 17) Stoll CMS 922, gauge: E12, needle set: 12. 18) Stoll CMS 933 HP, gauge: E14. 19) Stoll CMS 933 HP, gauge: E12-10, needle set: 12. 20) Stoll CMS 933 HP, gauge: E12-10, needle set: 10. 21) Stoll CMS 933 HP, gauge: E12-10, needle set: 10. 22) Stoll IBOM/b, gauge: E14, nominal width: 180mm. 23) Stoll IBOM/c, gauge: E14, nominal width: 200mm. Including 2 needle sets and various conversion kits Stoll, Groz-Beckert and Universal. Documentation available. An on-site inspection is possible. The machines are still in operation and are maintained and well-kept. Individual sale possible.