▷ Używane maszyny do pakowania z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Maszyny do pakowania [1 - 20 of 250]

Półautomatyczna zgrzewarka do tacek (traysealer)

Multivac Export Ag GALAXY TS 355

Niemcy

2006

używany

na żądanie

INNO32804

Max. tray outer dimensions: 435x365mm, max. tray depth with ejector: 130mm, max. film width: 500mm, max. film roll diameter: 220mm, cycle rate in vacuum and modified atmosphere packaging mode: 2-4 cycles/min, vacuum pump: 63m³/h, electrical connection: 380V, connected electrical load: 8.75kW, compressed air supply: 7bar, compressed air consumption: 80l/min, cooling water pressure: 2bar, cooling water consumption: 100l/h, protection rating: IP55, weight: 400kg. On-site inspection is possible, the machine is located in France.

Maszyna etykietująca

Langguth ETLAN 110

Niemcy

2018

używany

na żądanie

INNO32797

Offered is a labeling machine with a conveyor belt. Conveyor belt, container side guides, transparent machine guard, separate control cabinet with operating controls available. Inspection possible by arrangement.

Pionowa maszyna do spinania taśmą

Signode

Niemcy

1983

używany

na żądanie

INNO32772

Offered is a strapping machine with vertical strap guidance. Gantry frame, vertically movable strapping head for strapping packs of blocks. Inspection possible by arrangement.

Maszyna do poziomego owijania taśmą

Viktor Ridder

Niemcy

1994

używany

na żądanie

INNO32771

Offered is a strapping machine with horizontal strap guidance. Strap width according to the nameplate: 12.7mm/13mm, strap frame, vertical guide for positioning the strapping unit. Inspection possible by arrangement.

Linia do pakietowania wyrobów betonowych

Omag K1400

Niemcy

1997

używany

na żądanie

INNO32767

Offered is a block cubing system with a hydraulic unit. Listed together in the offer: product doubler including hydraulic unit (year of manufacture 2004), board destacker, board stacker, roller conveyor for board infeed, board conveyor to the lifting mast, board turner. Inspection possible by arrangement.

Maszyna termoformująca

Minke VACUTHERM PC

Niemcy

nieznany

używany

na żądanie

INNO32685

Forming area: 600x450mm, nominal pumping speed: 16m³/h, sound pressure level: 60dB(A), ultimate pressure: 2mbar, an on-site inspection is possible.

Maszyna do zgrzewania tacek

Ishida QX1100

Niemcy

2018

używany

na żądanie

INNO32682

Offered is a single-lane tray sealing line for food packaging. Sealing tool: 6 impressions. Tray format: Ø 148mm. Tray material: PP barrier. Tray volume max.: 550ml. Control system: Electronic machine control system with operator panel. Equipped with: Carsoe Anytray Denester (tray denester), Ishida infeed conveyor with indexing chain, length 6000mm, Ishida single-lane tray sealer QX1100 with 6-impression sealing tool including tooling trolley, Ishida conveyor belt, length 2400mm, Ishida X-ray inspection system IX-EN-2463, year of manufacture 2018, Ishida checkweigher DACS-G-S015-24-SS, year of manufacture 2018, Ishida discharge conveyor, length 1400mm, Ishida spare parts package. Low operating hours. Inspection is possible by arrangement.

System pakowania i paletyzacji

Votech VLR-400-N

Niemcy

2024

używany

na żądanie

INNO32614

Filling weight range: 5kg-25kg, max. bagging capacity: 400 bags/h, bag material: PE, bag length: 570mm-880mm, bag width: 290mm-420mm, net weigher volume: 60l, control system: Sigmatek. Including conveyor belts and palletizing robot. The machine has very low operating hours and is in working condition. Documentation available. An on-site inspection is possible.

Maszyna do owijania folią termokurczliwą

Vacuumpump A.üp.a TU120_200i

Niemcy

2011

używany

na żądanie

INNO32580

Supply voltage: 400V, Frequency: 50Hz, Current consumption: 60A, Power: 38kW, Auxiliary voltage: 110V AC. The system was in operation from 2012 to 2017 and is currently dismantled. The machine is in very good used condition. An on-site inspection is possible by appointment.

Paletyzator worków papierowych

Chronos Richardson CR400

Niemcy

1996

używany

na żądanie

INNO32573

Pallet dimensions 1 (wood): 1200x800mm, pallet dimensions 2 (wood): 1000x1000mm, packaging type: paper bags, max. throughput capacity: 400bags/h, support frame height (including support frame): 2000mm, installed power: 15kW, average power consumption: 9kW, mains voltage: 380V/50Hz, air consumption: 100Nl/min (dry and filtered), air pressure: 6kg/cm², motor protection rating: IP54, electrical protection rating: IP54, equipment: SEW gear motors, SEW self-braking motors, Herion solenoid valves, Herion pneumatic cylinders, Siemens electrical power components, Siemens contactors, Siemens push buttons, Siemens S5 PLC, Soprel frequency inverter, Klöckner safety limit switches, IFM proximity sensors, IFM photoelectric sensors, permanently lubricated rollers, waterproof, with documentation. An on-site inspection is possible.

Linia do napełniania i pakowania

Tetra Pak/ Shikoku Kakoki S-PS65UC

Niemcy

2009

używany

na żądanie

INNO32571

A filling machine with packer is available, 1) Filling machine Shikoku Kakoki S-PS65UC, compressed air connection: 588-882kPa, compressed air consumption: 1,300Nl/min, electrical connection: 148A, operating hours: 56,823h, suitable for milk, yogurt, fruit yogurt and similar products, 2) Packaging machine Tetra Pak TETRA CARDBOARD PACKER 70, wrap-around carton formats: 250, 500, 1000ml, year of manufacture: 2004, an on-site inspection is possible.

Karuzelowa maszyna napełniająca

Ampak Ammann KF 1/4

Niemcy

2008

używany

na żądanie

INNO32569

Throughput capacity: approx. 8,000cups/h, pre-doser: 20-250ml, main doser: (80) 100-600ml, cereal doser (TBD): 5-60g, spare dosing station, currently available format sets: rectangular ZKB, octagonal ZKB, round ZKB, connected load: 52kW, control: Siemens S7, weight: approx. 25t. An on-site inspection is possible.

Półautomatyczna maszyna do pakowania typu skin

Zappe SKA 3550

Niemcy

2015

używany

na żądanie

INNO32552

Table dimensions: 1250x800x1200mm, connected load: 4kW, length: 1000mm, width: 1850mm, height: 1600mm, with documentation, no maintenance has been carried out, an on-site inspection is possible.

Maszyny do pakowania metodą termoformowania

Multivac R7000 MC90 / R7000 MC

Niemcy

1992

używany

na żądanie

INNO32512

Two Multivac thermoforming packaging machines are offered. 1) Multivac R7000 MC90, year of manufacture: 1991, supply voltage: 380V, frequency: 50Hz, rated power: 10kW. 2) Multivac R7000 MC, year of manufacture: 1992, supply voltage: 380V, frequency: 50Hz, rated power: 12kW. Inspection possible by appointment.

Maszyna do worków rurowych pionowych

Hassia Redatron FB 25/16

Niemcy

1999

używany

na żądanie

INNO32510

Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system without LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit and transparent protective enclosure. Inspection possible by arrangement.

Maszyna do pakowania w folię termokurczliwą

Zappe

Niemcy

nieznany

używany

na żądanie

INNO32504

Offered for sale is an automatic shrink-wrapping system with film feed and shrink tunnel. Control system: Siemens SIMATIC HMI operator panel with display and emergency stop button. Equipped with film roll holder, film guide, protected packaging area, material support table, conveyor section, side safety guards with access doors, separate shrink tunnel with roller conveyor and extraction unit. Inspection possible by arrangement.

Maszyna do pakowania w folię termokurczliwą

Beck Packautomaten MP X

Niemcy

nieznany

używany

na żądanie

INNO32499

Offered for sale is an automatic shrink-wrapping system with film feed and shrink tunnel. The system consists of a packaging machine with an enclosed working area and a downstream shrink tunnel. Control system: Control panel with display, membrane keypad, control buttons and emergency stop button. Equipped with film roll holder, film guide, motorized conveyor belts, transparent protective enclosure and signal light. Inspection possible by arrangement.

Linia do napełniania puszek i pakowania

Fillpack/ Rühle/ Cda/ Ecoma

Niemcy

2022

używany

na żądanie

INNO32478

A complete can filling and packaging line with can feeding, lid feeding, filling, sealing, capping, labeling and banding is available, 1) feeding system, with two format-adjustable rotary tables for the separate feeding of empty cans and lids, 2) REX EVF 327 vacuum filler, year of manufacture: 2017, 3) Fillpack R01-TI filling and closing machine, format: 75-400ml, year of manufacture: 2022, for filling, positioning and sealing the sealing foil as a tamper-evident seal, placing and screwing on the lid, 4) CDA NINON labeling system, year of manufacture: 2021, for lid, wrap-around and body labeling, 5) Garvens BF 8 S2 automatic checkweigher, year of manufacture: 2002, as an inline checkweigher with automatic rejection of products not conforming to the specified weight, 6) ECOMA can banding machine, max. output depending on format: approx. 35cans/min, year of manufacture: 2022, for control or security bands, 7) COMPRAG ARD-1510 screw compressor, power: 15kW, max. operating pressure: 10bar, air flow rate: 1.9m³/min, year of manufacture: 2022, with RH-500 compressed-air receiver (500l) and refrigeration dryer, the connecting conveyor technology, controls, control cabinets and format parts for 75ml and 400ml cans are included, an on-site inspection is possible.

Obkurczarka foliowa

Kallfass Universa 5050

Niemcy

1998

używany

na żądanie

INNO32373

Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible.

Maszyna do pakowania w blistry

Hamer BPC-23

Niemcy

2018

używany

na żądanie

INNO32361

Materials for blister packaging: PVC + coated PVC, PETG + PETG, PET GAG + PETGAG, PS + Complex, operating mode: intermittent, max. output: 12cycles/min, forming film width: 180-350mm, max. forming film diameter: 400mm, max. forming film thickness: 500µm, film transport tolerance (motor): +/-0.2mm, forming area: 150-310x100-210mm, max. sealing pressure: 950kg, max. punching pressure: 10,000kg, max. forming depth: 60mm, sealing temperature: 80-200°C, vacuum pump power: 0.75kW, vacuum pump capacity: 20m³/h, forming heater power: 4.8kW, air consumption: 34m³/h, connected load: 13kW, length: 5530mm, width: 880mm, height: 1460mm, with documentation, Videojet 1520 continuous inkjet printer and Lauda Ultracool UC-0080 recirculating chiller. An on-site inspection is possible.