▷ Używana technologia magazynowana z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Technologia magazynowana

Inne maszyny 2 Magazyn kompletacyjny 3 Magazyn wysokiego składowania 1 Mrówki i wózki paletowe 8 Paternoster 3 Półki bezśrubowe 1 Półki przepływowe 1 Przechowywanie paneli 3 Regały do dużych obciążeń 3 Regały wjezdne na palety 1 Silosy 6 Suwnice 12 Systemy wózkowe 1 Wózek widłowy 26

Innovac maszyny-uzywane

Technologia magazynowana [1 - 20 of 71]

Regał przepływowy

Galler Omega

Niemcy

nieznany

używany

na żądanie

INNO32626

Offered for sale is a pallet flow racking system with four storage levels, consisting of two rack blocks. Pallet load for Euro pallets: 200-850kg incl. pallet. Technical data: Max. load height incl. pallet: 1620mm. Number of storage levels: 4. Incline of the flow lanes: 4%. Width: 7500mm. Rack depth per block: 16290mm. Outer upright height: 7451mm. Equipped with pallet flow lanes, wheel stop rails and rack impact protection. Inspection possible by arrangement.

Suwnica pomostowa

Abus

Niemcy

1998

używany

na żądanie

INNO32587

Load capacity: 3200kg. Inspection possible by appointment.

Instalacja do przechowywania mąki

Pitec Mehl- und Siloanlage

Niemcy

2016

używany

na żądanie

INNO32472

The offered system consists of a total of seven documented components: It is equipped with: Pitec flour filling station, silo 1 capacity: 5400kg, silo 2 capacity: 4000kg, silo 3 capacity: 4000kg, silo 4 capacity: 4000kg, Pitec discharge station with electronic scale, Thuba Earth Monitoring System. Inspection possible by appoint

Wózek widłowy elektryczny

Jungheinrich EFG 425 K

Niemcy

2006

używany

na żądanie

INNO32469

An electric forklift truck with side shift is offered. Operating hours: 9535h. Equipped with charger, safety bar, BlueSpot, side shift and extendable forks. Inspection possible by appointment.

Wózek widłowy

Jungheinrich EFG 218 K

Niemcy

2011

używany

na żądanie

INNO32465

A forklift with side shift is offered. Operating hours: 11065h. Equipped with safety bar, BlueSpot, side shift and telescopic fork arms. Inspection possible by appointment.

Hydrauliczny obrotnik uchylny

Kinshofer KM04S68-30

Niemcy

2021

używany

na żądanie

INNO32397

Load capacity: 4.5t, shaft diameter: 68mm, max. hydraulic pressure: 370bar, rotator flow rate: approx. 25-40l/min, torque: 850Nm, bending moment: 3000Nm. An on-site inspection is possible.

Wózek widłowy na paliwo

Linde H35 D

Niemcy

1984

używany

na żądanie

INNO32356

Load capacity: 3.5t, permissible gross weight: 10500kg, operating hours: approx. 4538h. An on-site inspection is possible.

Paternoster

Megamat Gmbh 130-325-10

Niemcy

1991

używany

na żądanie

INNO32347

Number of shelves: 10, three-phase mains connection: 380V, N/PE, frequency: 50Hz, duty cycle: 40%, supply fuse rating: 6A, rated power consumption: 1500W, an on-site inspection is possible.

Gazowy wózek widłowy

Steinbock Boss NH 16-502

Niemcy

1995

używany

na żądanie

INNO32315

Load capacity: 1600kg, lift height: 3300mm, engine: Ford, drive: LPG. UVV inspection sticker 2026 available. The hydraulic system was serviced in 2026. Documentation available. Inspection by appointment possible.

Wózek widłowy elektryczny

Linde E15C

Niemcy

1996

używany

na żądanie

INNO32296

A Linde electric forklift truck in need of repair is offered. Weight: 2250kg. The battery is in good condition and the forklift truck is operational. The lift control is defective and the sideshift has been fixed in position. An on-site inspection is possible.

Magazyn towarów długich

Kemper Storatec STORABAR

Niemcy

2014

używany

na żądanie

INNO32277

An automatic Kemper Storatec long material storage system is offered. Storage aisles: 6, rack bays: 12, storage locations: 162, number of system cassettes: 160 units, of which 147 units with usable dimensions X/Y/Z: 6500mm/680mm/300mm and 13 units with usable dimensions X/Y/Z: 6500mm/680mm/400mm, max. payload per cassette: 5000kg. Documentation available. An on-site inspection is possible.

Wózek widłowy

Mkf Gmbh CS 70D

Niemcy

2019

używany

na żądanie

INNO32174

Lifting height: 3000mm, rated load capacity: 7t, load center: 600mm, weight: 11,29t, operating hours: approx. 3000h, with 360° rotator and air conditioning, the rear axle is defective (mounting pin and wheel hub). An on-site inspection is possible.

Regał paletowy przepływowy

Toyota LS22 R103

Niemcy

2021

używany

na żądanie

INNO32160

Euro pallet load capacity: 100-900kg, max. number of pallets per channel: 10, max. load per bay: 54t, max. load per channel: 9t x2=18t, length: 12,550mm, width: 29,200mm, height: 5500mm, with documentation. An on-site inspection is possible.

Wózek widłowy

Hyster H 4.00 XL-5

Niemcy

1995

używany

na żądanie

INNO32000

A Hyster forklift is offered. Lift height: 5250mm, track width: 1130mm, load capacity: 4000kg, fork length: 1250mm, fork carriage/attachment width: approx. 1220mm, engine power: 65kW. Dimensions: X/Y/Z: 4150mm/1380mm/2440mm, weight: approx. 5880kg. An on-site inspection is possible.

System regałów

Toyota

Niemcy

2022

używany

na żądanie

INNO31991

Offered is a Toyota narrow-aisle high-bay racking system without equipment. Rack rows: 9, compartments: 21, levels: 7 (individually configurable), number of pallets per compartment: 21, number of pallets per row: 441, total pallet locations: 3969. System dimensions X/Y: approx. 90m/16m/8,4m. An on-site inspection is possible.

Wózek widłowy elektryczny

Still R 70-35

Niemcy

1989

używany

na żądanie

INNO31903

A Still diesel forklift is available. Payload: 3500kg, max. gross weight: 10000kg, load center: 500mm, load distance: 510mm, engine: Mercedes-Benz OM617, displacement: 3m³, engine power: 46.5kW, wheelbase: 1950mm, mast: duplex, lift height: 3320mm, machine dimensions X/Y/Z: approx. 3950mm/1350mm/2400mm, weight: approx. 5450kg. An on-site inspection is possible.

Suwnica pomostowa

Abus HB

Niemcy

nieznany

używany

na żądanie

INNO31855

Offered is an ABUS lightweight crane system with electric chain hoist and trolley. Load capacity: 500kg, rail length: approx. 5000mm. Inspection by appointment possible.

Sztaplarka

Clark DPH 75

Niemcy

1993

używany

na żądanie

INNO31801

A Clark diesel forklift is offered. Load capacity: 7500kg, load center: 600mm, max. lifting height: 6070mm, lowered height: approx. 3300mm, transmission type: torque converter transmission, engine manufacturer: Perkins, power: approx. 78hp, operating weight: 10640kg. UVV inspection and maintenance: carried out. Inner left tie rod end is loose. Viewing possible by appointment.

Żuraw samojezdny

Shop Crane SC2000C

Niemcy

2017

używany

na żądanie

INNO31760

A workshop crane is offered for lifting and maneuvering engines, assemblies, machine components, and heavy workshop parts. Max. lifting capacity: 2000kg, Load capacity per boom position: 2000kg/1700kg/1500kg, Design: mobile and foldable, Min./max. hook height: 175mm/2490mm, Leg height: 208mm, Boom: telescopic, Min./max. boom length: approx. 1295mm/1595mm, Weight: 165kg, Overall dimensions in working position: X/Y/Z: approx. 1900mm/1170mm/2490mm. Inspection possible by appointment.

Wózek widłowy

Toyota/bt Reflex RR B7

Niemcy

2009

używany

na żądanie

INNO31657

An electric reach truck Toyota (BT) is available. Rated capacity: 2500kg, load center: 600mm, lift height: 8000mm, free lift: 2757mm, max. travel speed: 12km/h, gradeability with/without load: 12%/7%, wheelbase: 1600mm. Machine dimensions X/Y/Z: approx. 3200mm/1300mm/3350mm, weight: approx. 5000kg, operating hours: approx. 5438h. The battery of the machine was replaced in 2016. Documentation available. An on-site inspection is possible.