▷ Używane inne maszyny z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Inne maszyny

Ceramika, kamienie i ziemia 4 Maszyny specjalne 4 Maszyny szklane 24 Technika miejska 2 Technologia próżniowa 2 Urządzenia technologii klarowania 1 Zarządzanie odpadami, recykling 24

Innovac maszyny-uzywane

Inne maszyny [1 - 20 of 61]

Piła linowa do cięcia konturowego

Baumunk KSSF 2000 UNIKONTUR

Niemcy

2000

używany

na żądanie

INNO32409

A Baumunk contour wire saw in need of repair is offered. Drive power: 5.5kW, control: Bosch OSA. The machine has been idle for about one year. Contour sawing was still working well when last used. The mounting for the grinding rollers is defective. Inspection by appointment possible.

Młyn młotkowy

Haas HSZ-V 1300

Niemcy

2011

używany

na żądanie

INNO32327

Max. throughput: 25t/h, inlet width: 1300mm, inlet height: 1200mm, rotor diameter: 1200mm, drive power: 132-315kW, an on-site inspection is possible.

Stół sortujący

Trennso-technik TTS 900/1000/ 1 KW

Niemcy

2008

używany

na żądanie

INNO32326

Two identical separating tables are available, screen width: 890mm, screen length: 1000mm, screen area per screening deck: 0.89m², number of screening decks: 1, number of outlets: 2 (light/heavy material), screen clamping: manual/pneumatic, dimensions with outlets: 1738x1287x1351mm, dimensions without outlets: 1140x1287x1351mm, weight: 700kg, an on-site inspection is possible.

Piec rolkowy

Studio 1 ST1 FRM 9/1200/1250°

Niemcy

1997

używany

na żądanie

INNO32314

Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible.

Pozioma prasa do belowania

Hsm AK 10/900

Niemcy

1987

używany

na żądanie

INNO32303

Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible.

Prasa do belowania

Hsm 155.2 VL

Niemcy

2001

używany

na żądanie

INNO32062

Press force: 16t, Feed opening dimensions X/Y: 1100mm/590mm, Chamber dimensions X/Y/Z: 1100mm/700mm/1130mm, Bale dimensions X/Y/Z: 1100mm/700mm/950mm, Max. bale weight: 200kg, Tying: 4-way vertical, Throughput: approx. 4-8 bales/h, Machine dimensions X/Y/Z: approx. 1450mm/950mm/2400mm, Weight: approx. 950kg. No UVV inspection and the hydraulic oil has been drained. The baler has not been cleaned. An on-site inspection is possible.

Suszarka tunelowa

Smt HTT 4.5 K 6-5

Niemcy

2012

używany

na żądanie

INNO32023

An SMT continuous drying system is available. Infeed height range: 850mm-950mm, process chamber length: 12500mm, heating zones: 9, bottom heating zones: 4, heating length: 4500mm, convection section: 4500mm, max. process temperature: 230°C, cooling zones: 12, cooling zone length: 6775mm, cooling units: 3, conveyor type: PTFE belts, conveyor width: 800mm, working width: 800mm, max. speed: 3m/min, top/bottom clearance: 30mm/0mm, exhaust connection diameter: 300mm, machine dimensions X/Y/Z: approx. 13000mm/2000mm/2350mm, weight: approx. 7200kg. Documentation available. An on-site inspection is possible.

Pralka do szkła

Malnati 800 TNS

Niemcy

nieznany

używany

na żądanie

INNO32006

A horizontal Malnati glass washing and drying machine is available. Nominal working width: 800mm, glass thickness range: 2mm-8mm, min. glass dimensions X/Y: 100mm/100mm, min. glass sheet spacing: 50mm, feed speed: 3.5m/min, washing brushes: 4. Machine dimensions X/Y/Z: approx. 2400mm/1350mm/1300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

Maszyna do cięcia szkła

Hegla VSG-A 46 MT

Niemcy

2002

używany

na żądanie

INNO31843

A Hegla glass cutting system will be available approximately from December 2026. Direction of travel: right-left, connected load: 35kW, max. glass sheet dimensions X/Y: 4600mm/3210mm, max. single glass thickness: 16mm, machine dimensions X/Y/Z: approx. 13200mm/6000mm/1000mm. The stops are worn. Documentation available. An on-site inspection is possible.

Linia do hartowania szkła

Efco Glass Temperer

Niemcy

2001

używany

na żądanie

INNO31728

A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment.

Prasa do belowania

Mac Fab MF LH300

Niemcy

2020

używany

na żądanie

INNO31698

A paper and cardboard baling press Bema is available. Motor power: 2.2kW, pressing force: 20t, opening dimensions X/Y: 596mm/1200mm, bale dimensions X/Y/Z: 1200mm/800mm/1000mm, max. bale weight: 300kg, cycle time: 40s, hydraulic oil filling: 24l, machine dimensions X/Y/Z: approx. 1800mm/1100mm/1950mm, weight: approx. 1150kg. Documentation available. An on-site inspection is possible.

Piec do szkła

Efco Furnaces 2400 x 4200 Glass Temp

Niemcy

1997

używany

na żądanie

INNO31677

A complete Efco furnace system for the production of tempered safety glass is available. Heating capacity: 814.5kW, max. glass pane dimensions X/Y: 2400mm/4200mm, max. temperature: 750°C, total system length: approx. 25m. Components: loading section, furnace, cooling section, unloading section. Documentation available. An on-site inspection is possible.

Prasa belująca pionowa

Hsm V-Press 818

Niemcy

2012

używany

na żądanie

INNO31618

Pressing force: 185kN, filling opening dimensions: 1195x541mm, max. bale weight depending on material: 200kg, max. bale dimensions: 1200x780x700mm, throughput capacity: 2 to 5 bales/h, idle cycle time: 35s, strapping: 4 fold with polyester strap, pressing capacity at idle: 68m³/h, pressing chamber dimensions: 1200x780x1300mm, voltage: 3x 400V, motor power: 3kW, length: 1700mm, width: 1046mm, height: 2370mm, weight: 994kg. An on site inspection is possible.

Maszyna do cięcia szkła

Lisec ESL-60/30RS

Niemcy

1998

używany

na żądanie

INNO31247

A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible.

Przepustnica kątowa próżniowa

Leybold BAV DN800 ISO-F EP VA

Niemcy

nieznany

używany

na żądanie

INNO31055

Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible.

Rozdrabniacz

Burghardt PS Starter

Niemcy

2021

używany

na żądanie

INNO30995

A Burghardt cardboard shredding machine is available. Cutting width: 320mm, max. cardboard thickness: 12mm, throughput capacity: approx. 2m³/h, operating speed: 10m/min, motor power: 0.75kW, machine dimensions X/Y/Z: approx. 500mm/600mm/650mm, weight: approx. 100kg. Documentation vorhanden. An on-site inspection is possible.

Maszyna odwadniająca

Hiller DCH76-402

Niemcy

2010

używany

na żądanie

INNO30966

A Hiller two-phase centrifuge for solid-liquid separation and dewatering is available. Drum speed: 2700rpm, max. operating speed: 2650rpm, max. feed material density: 1.3kg/dm³, drum inner diameter: 752mm, drum wall thickness: 20mm, drum material: 1.4470, max. operating temperature: 50°C, max. operating pressure: 0bar, motor power: 75kW. Machine dimensions X/Y/Z: approx. 5100mm/2300mm/1750mm, weight: approx. 11600kg. Documentation available. An on-site inspection is possible. Image is an example.

Maszyna do piaskowania

S.a.g. T3/T4

Niemcy

2005

używany

na żądanie

INNO30958

Two glass sandblasting systems from S.A.G. are available. 1) S.A.G. T4, year of construction: 2005, arrangement: vertical, max. blasting width: 3000mm, max. blasting height: 2250mm, max. glass height: 2400mm, glass thickness range: 3mm-40mm, blasting capacity: approx. 15m²/h, machine dimensions X/Y/Z: approx. 3800mm/3300mm/1900mm, weight: approx. 1550kg. 2) S.A.G. T3, year of construction: 2002, blasting width: 2800mm, blasting height: 1200mm, glass thickness range: 3mm-40mm, machine dimensions X/Y/Z: approx. 4100mm/2300mm/1900mm, weight: approx. 1350kg. Documentation available. An on-site inspection is possible.

Rozdrabniacz

Erdwich M600/1-600

Niemcy

2021

używany

na żądanie

INNO30878

A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

Maszyna do szlifowania szkła

Knopp Glaskant-Combi

Niemcy

1992

używany

na żądanie

INNO30740

An old Knopp glass grinding machine for edge processing is available. Grinding belt dimensions X/Y: 1830mm/100mm, glass types: float glass/mirror glass/furniture glass/table tops, grinding wheel diameter: 200mm, table dimensions X/Y: 900mm/1400mm, machine dimensions X/Y/Z: approx. 1300mm/1500mm/1700mm, weight: approx. 500kg. On site inspection is possible.