Tokarka uniwersalna

Maschstroj C11MB

Niemcy

1980

używany

na żądanie

INNO32654

Equipment: tailstock with handwheel, compound slide, cross slide, longitudinal carriage with apron, machine light, integrated machine stand, tool holder. Inspection possible by appointment.

więcej

Tokarka centralna

Krasny Proletarij 16K20

Niemcy

1977

używany

na żądanie

INNO32646

Offered is a conventional center lathe with lead screw and feed rod. Thread cutting: metric and imperial threads. Speed and feed selection: mechanically via gearbox. Workpiece clamping: three-jaw chuck. Tool holder: four-way tool post. Equipped with longitudinal and cross slides, tailstock with quill, lead screw and feed rod, digital position readout and work light. Inspection possible by arrangement.

więcej

Tokarka czołowa

Veb Werkzeugmaschinenfabrik 7. Oktober DP 2/S 3

Niemcy

nieznany

używany

na żądanie

INNO32644

Offered is a facing lathe with a large faceplate. Swing diameter over foundation plates: 2480mm. Center height above foundation plates: 1250mm. Faceplate diameter: 1600mm. Maximum faceplate torque: 14000Nm. Main spindle bore: 100mm. Front main spindle bearing diameter: 240mm. Turning tool shank cross-section: 50 × 50mm. Equipped with four chuck jaws, movable bed-mounted carriage, cross slide, tool holder, mechanical control levers and handwheels.

więcej

Tokarka karuzelowa

Sedin 1516

Niemcy

nieznany

używany

na żądanie

INNO32643

Offered is a single-column vertical turret lathe with tool turret. Equipped with a large rotary table with radial clamping slots, clamping brackets, vertical tool slide with turret head, digital position readout, work light and separate control panel. Inspection possible by arrangement.

więcej

Tokarka centralna

Tos Celákovice SU-63A

Niemcy

nieznany

używany

na żądanie

INNO32642

Offered is a conventional shaft lathe with tailstock. Swing over bed: 630mm. Swing over cross slide: 360mm. Center height above bed: 286mm. Spindle bore: 60mm. Spindle diameter at front bearing: 140mm. Number of spindle speeds: 30. Number of longitudinal feed steps: 41. Number of cross feed steps: 41. Longitudinal feed: 0.064-6mm/rev. Cross feed: 0.025-2.32mm/rev. Maximum workpiece weight according to manufacturer: 6000kg. Metric thread pitches: 0.219-48mm. Equipped with a large chuck, tailstock, four-way tool post, longitudinal and cross slides, as well as mechanical control levers and handwheels. Inspection possible by arrangement.

więcej

Tokarka tarczowa

Maschinenfabrik Ravensburg Ag P 30

Niemcy

nieznany

używany

na żądanie

INNO32639

Offered 250mm. Feed steps: 12. Cross-bed feed: 0.05-3mm/rev. Carriage and rotating section feed: 0.04-2.5mm/rev. Feed motor speed: 1000rpm. Feed motor power: 2.2kW. Permissible workpiece weight, cantilevered with a center of gravity distance of 300mm: approx. 5000kg. Permissible workpiece weight between centers, without additional support: 20000kg. Equipped with a large faceplate with clamping devices, cross-bed support, movable tool slide and mechanical lever controls. Inspection possible by arrangement.

więcej

Tokarka centralna

Saro SNA 710 × 3000

Niemcy

1982

używany

na żądanie

INNO32629

Offered for sale is a conventional center lathe with lead screw and feed rod. Distance between centers: 3000mm. Swing over bed: 710mm. Center height: 342mm. Spindle speed range: 8-1250rpm. Number of spindle speed steps: 23. Longitudinal feed: 0.056-10mm/rev. Cross feed: 0.028-5mm/rev. Metric thread pitches: 1-176mm. Max. workpiece weight between centers: 2500kg. Max. workpiece weight between centers with steady rest: 3000kg. Tailstock quill travel: 300mm. Equipped with digital readout, three-jaw chuck, four-way tool post and tailstock. Weight: approx. 5400kg. Overall dimensions X/Y/Z: approx. 5325mm/1510mm/1510mm. Inspection possible by arrangement.

więcej

Tokarka centralna

Ponar-wrocław TUR 630 M

Niemcy

1986

używany

na żądanie

INNO32627

Offered for sale: Conventional center lathe with lead screw and feed rod. Distance between centers: 1500mm. Swing over bed: 630mm. Spindle speed range: 18-1800rpm. Number of spindle speeds: 21. Spindle bore: 90mm. Bed width: 433mm. Longitudinal feed: 0.08-3.26mm/rev. Cross feed: 0.04-1.63mm/rev. Equipped with digital readout, lathe chuck, four-way tool post and tailstock. Weight: approx. 3300kg. Overall dimensions X/Y/Z: approx. 3400mm/1420mm/1645mm. Inspection possible by arrangement.

więcej

Automatyczna tokarka sterowana krzywką

Traub TB 60

Niemcy

1968

używany

na żądanie

INNO32598

Offered is a cam-controlled automatic lathe with bar feeder. Main spindle bore: Ø 60mm. Spindle speed: 160-1600rpm. Speed steps: 11. Distance between centers: 340mm. Center height: 125mm. Equipped with mechanical collet and bar feeder. Inspection possible by appointment.

więcej

Tokarka centralna

Fritz Kern Kg D560

Niemcy

nieznany

używany

na żądanie

INNO32583

Swing diameter over bed: 560mm, swing diameter over cross slide: 320mm, spindle speed: 900rpm, machine has surface rust, not operational, an on-site inspection is possible, not connected to power.

więcej

Tokarka

Colchester Chipmaster

Niemcy

nieznany

używany

na żądanie

INNO32581

Including accessories. Inspection possible by prior arrangement.

więcej

Tokarka CNC

Index-werke ABC

Niemcy

2005

używany

na żądanie

INNO32551

Main spindle bore: 42mm, rated voltage: 400V AC, rated current: 45A, connected load: 26kW, control: Siemens SINUMERIK 840D/PCU50, length: 3400mm, width: 1400mm, height: 1750mm, weight: 2.5t, operating hours: >100,000h, spindle hours: 48,348h, with FMB Turbo 5-42 bar feeder, documentation and service reports, regularly maintained, an on-site inspection is possible, available from March 2027.

więcej

Uniwersalne centrum tokarskie CNC

Emco MAXXTURN 65

Niemcy

2007

używany

na żądanie

INNO32550

X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible.

więcej

Tokarka CNC

Spinner TC 800 110 MC

Niemcy

2009

używany

na żądanie

INNO32523

X-axis travel: 360mm, Z-axis travel: 980/1580mm, rapid traverse X/Z: 15/24m/min, max. turning diameter: approx. 500mm, max. swing diameter: 800mm, spindle nose: A11, bar capacity: 110mm, power (100%/40%): 22/33kW, torque gear stage 1: 175/263Nm, torque gear stage 2: 700/1,050Nm, turret type: servo turret, tool stations: 12, tool holder: VDI 50, number of driven tools: 12, driven tool speed: 4,000rpm, power (100%/40%): 5/9.6kW, axial torque (100%/40%): 18/35Nm, radial torque (100%/40%): 15/28.8Nm, hydraulic tank: 11l, central lubrication reservoir: approx. 2-3l, mains connection: 3/PE~ 400V, frequency: 50/60Hz, operating current (I_B): 63A, rated current (I_N): 80A, length: 3,250mm, width: 1,980mm, height: 2,090mm, weight: 8.5t, operating hours: 27,271h, including Spinner SERVO-LOAD 110 1500 bar feeder and documentation. On-site inspection is possible.

więcej

Tokarki CNC

Kern CD 322

Niemcy

2007

używany

na żądanie

INNO32507

Offered for sale is a CNC lathe with tool turret. Technical specifications: Machine operating hours: approx. 20000h, main spindle bearings replaced at approx. 16000 machine operating hours. Control system: Heidenhain CNC control. Equipped with tool turret, tailstock, various clamping tools, tool holders, collets and additional tools as well as chip conveyor. Inspection possible by arrangement.

więcej

Tokarka CNC

Spinner TC32-MC

Niemcy

1997

używany

na żądanie

INNO32467

A compact CNC lathe is offered. Control: Siemens. Condition: defective. Turret enable signal is missing. Inspection possible by appointment.

więcej

Tokarka CNC

Index G200 Compact

Niemcy

1998

używany

na żądanie

INNO32466

A CNC lathe with bar feeder is offered. Equipped with an IRCO Breuning PROFImat bar feeder and KNOLL 400 S - 1/200 chip conveyor. Control: INDEX C200-4D / Siemens SINUMERIK 840C. Condition: in need of repair, maintenance required. Hoses and guide channels of the bar feeder are defective. The emergency stop currently cannot be reset. The oil pressure/air pressure switch trips the circuit breaker. Inspection possible by appointment.

więcej

Tokarka CNC

Dmt-drehtechnik Kern CD480

Niemcy

2000

używany

na żądanie

INNO32458

A lathe with CNC control is offered. Equipped with three-jaw chuck, tailstock, tool holder, cutting fluid supply and machine enclosure. Control: HEIDENHAIN. Inspection possible by prior arrangement.

więcej

Tokarka CNC

Traub TND 360

Niemcy

1984

używany

na żądanie

INNO32454

A CNC lathe is offered. Equipped with three-jaw chuck, tool turret and hydraulic unit. Control: TRAUB SYSTEM TX 8. Inspection possible by prior arrangement.

więcej

Tokarka centralna

Colchester Triumph 2500

Niemcy

1989

używany

na żądanie

INNO32453

A center lathe with 2-axis digital readout is offered. Tool holder, coolant supply and transparent guard. Inspection possible by prior arrangement.

więcej

Wszystkie oferty / Obróbka metali i obrabiarki / Tokarki