▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Obróbka metali i obrabiarki / Maszyny do obróbki drutu

Innovac maszyny-uzywane

Maszyny do obróbki drutu [1 - 20 of 23]

W pełni automatyczna maszyna CNC do nawijania sprężyn skrętnych

Wafios FTU 1.1

Niemcy

1991

używany

na żądanie

INNO32522

Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible.

Liniowa maszyna do nawijania / Linia produkcyjna do produkcji stojanów niQ

Aumann LWS/K 6-160

Niemcy

2016

używany

na żądanie

INNO32494

Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment.

Maszyna CNC do gięcia sprężyn i drutu

Itaya Tokyo MCS 15G

Niemcy

1995

używany

na żądanie

INNO32442

Wire diameter: 0.4-1.5mm, control: MCS SYSTEM V, an on-site inspection is possible.

Maszyna do prostowania i przycinania drutu

F. W. Bündgens UD 2

Niemcy

1970

używany

na żądanie

INNO32083

Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible.

Maszyna nawijająca

Mag ASW 50-3FK

Niemcy

1987

używany

na żądanie

INNO31796

A roll material processing machine MAG is offered. Min./max. material width: approx. 5mm/50mm, material thickness range: approx. 0.05mm to 1.5mm, reel mandrel diameter: 76mm, usable mandrel length: approx. 60mm, max. roll outer diameter: approx. 300mm, guide roller diameter: approx. 40mm, material guide track width: approx. 50.5mm. Inspection possible by prior arrangement.

W pełni zautomatyzowana maszyna do zaciskania

Schleuniger CC 64-2

Niemcy

2009

używany

na żądanie

INNO31476

A fully automatic cable processing machine Schleuniger with two stations and one compact station Strunk is available. Cable length range: 55mm-65000mm, conductor cross-section range: 0.13mm²-6mm², max. stripping length: 18mm, max. feed speed: 12m/s. Machine dimensions X/Y/Z: approx. 3750mm/1450mm/1850mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible.

Maszyna do skręcania lin

Niehoff D 631

Niemcy

2014

używany

na żądanie

INNO31340

A Niehoff double twist stranding machine is available. Spool size: 630mm, max. spool width: 475mm, copper processing range: 0.09mm²-6mm², single wire diameter: 0.05mm-0.85mm, max. speed: 6000rpm, max. tensile force: 200N, machine dimensions X/Y/Z: approx. 3000mm/1700mm/1600mm, weight: approx. 3000kg, operating hours: approx. 7371h. Including frame and some accessories as well as spare parts. Documentation available. An on-site inspection is possible.

Maszyna do obróbki drutu

Wafios N90/DS80/N6/N5/AHL

Niemcy

1997

używany

na żądanie

INNO31250

Several Wafios wire processing machines with two payoff reels are available. 1) Wafios N90, year of manufacture: 2003. Including Wafios AHL 41 D-M payoff reel, year of manufacture: 2002. 2) Wafios DS 80. 3) Wafios N5. 4) Wafios AHL 41 DR wire payoff reel, year of manufacture: 1998. 5) Wafios AHL 41 D wire payoff reel, year of manufacture: 1997. All machines including payoff reel. An on-site inspection is possible. Individual sale possible.

Maszyna do obróbki kabli

Ka-be-ma AS400/T-KW-UKW-A-1,5/DWST400-1

Niemcy

2005

używany

na żądanie

INNO31109

Three cable processing machines from a complete extrusion line are available. 1) Spindle pay-off Ka-Be-Ma AS400, spool flange diameter range: 140mm-400mm, min. core diameter: 90mm, max. spool width: 300mm, max. spool weight: 50kg, conductor diameter range: 0.1mm-1mm, max. pay-off speed: 600m/min, tensile force: 0.5N-20N, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 1000kg. 2) Cooling section Ka-Be-Ma T-KW-UKW-A-1,5, Zone 1: Process: immersion cooling, temperature range: 70°C-80°C, length: 2000mm. Zone 2: Process: spray cooling/deflection section, temperature: approx. 25°C. 3) Dual take-up Ka-Be-Ma DWST400-1, spool flange diameter range: 305mm-400mm, min. core diameter: 156mm, max. spool width: 282mm, conductor diameter range: 0.1mm-1mm, speed: 600m/min, tensile force range: 0.5N-1.5N, max. spool weight: 80kg, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible.

Maszyna do ostrzenia i walcowania

Krollmann Nowa 3/S

Niemcy

1991

używany

na żądanie

INNO31049

A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible.

Maszyna do prostowania i cięcia drutu

Wafios R 31

Niemcy

nieznany

używany

na żądanie

INNO31047

A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.

Automatyczna giętarka do drutu CNC

V&c VC-REC-08-Advanced

Niemcy

2018

używany

na żądanie

INNO30672

A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible.

Maszyna nawijająca

Blume & Redecker AM 100/AM150

Niemcy

1980

używany

na żądanie

INNO30137

Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible.

Cnc maszyna do nawijania sprezyn

Bb Spring (babbio) CNC 800

Niemcy

1995

używany

na żądanie

INNO28437

A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available.

Maszyna do wykrawania i gięcia

Bihler GRM-50

Niemcy

1979

używany

na żądanie

INNO24616

Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg.

Zaciskarka środkowa

Somavis T-8K / T-8L

Niemcy

1983

używany

na żądanie

INNO15816

There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min.

Maszyna do wyżarzania oporowego

Tecno Induction

Niemcy

2016

używany

na żądanie

INNO25790

Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes.

Maszyna nawijająca

Schmidt SD20-30/7

Niemcy

1993

używany

na żądanie

INNO25776

Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools.

Nawijarka

Rudolph & Koschinski

Niemcy

nieznany

używany

na żądanie

INNO24361

The machine is a rewinding machine for producing cables, with radial force measuring axes Honigmann, including documentation.

Nawijarka

Rosendahl RA 7061

Niemcy

1987

używany

na żądanie

INNO21279

Max. coil weight: 10t, controls: SIEMENS S5, without documentation.