▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Szlifierki [1 - 20 of 96]

Szlifierka narzędziowa CNC

Schneeberger MRG Gemini

Niemcy

1999

używany

na żądanie

INNO30049

A CNC 5-axis tool grinding machine Schneeberger is available. Travel X/Y/Z: 360mm/270mm/270mm, C-axis rotation range: +/-210°, Linear axis resolution: 0.001mm, C- and A-axis resolution: 0.0001°, max. grinding diameter: 250mm, center height: 210mm, Workpiece holder: ISO50, Spindle speed: 9000rpm, max. workpiece length: 400mm. Machine dimensions X/Y/Z: approx. 3000mm/1500mm/2300mm, Weight: approx. 5000kg, Control: Fanuc 16. Documentation available. An on-site inspection is possible.

Uniwersalna szlifierka CNC

Saacke UW II D

Niemcy

1997

używany

na żądanie

INNO30048

Axes: 5, travel X/Y/Z: 580mm/250mm/250mm, center height: 170mm, workpiece holder: ISO50, tool holder: HSK, max. workpiece diameter: 250mm, max. workpiece length: 430mm, feed rate: 15m/min, rated power: 30kW, weight: approx. 6400kg. An on-site inspection is possible.

Szlifierki bezkłowe do wałków

Loeser RPS 374/2+2

Niemcy

2005

używany

na żądanie

INNO30011

A centerless round and polishing belt grinding machine Loeser (RPS 376/2+2), retrofitted in 2024, is available. Stations grinding/polishing: 2/2, grinding range: 10mm-120mm, belt dimensions X/Y: 3000mm/200mm, feed rate: 15m/min, machine dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.

Szlifierka do wewnętrz elementów CNC

Okamoto IGM 15 NC III

Niemcy

2014

używany

na żądanie

INNO29983

Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.

Szlifierka CNC

Kapp PAS 383 CNC

Niemcy

1990

używany

na żądanie

INNO29968

Gear diameter: 300mm, max. grinding length: 550mm, module range: 0.5mm-8mm, helix angle: +/-35°, max. workpiece weight: 100kg, weight: approx. 7500kg. An on-site inspection is possible.

Szlifierka profilowa CNC

Amada DV 1

Niemcy

2012

używany

na żądanie

INNO29964

An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China.

Szlifierka narzędziowa CNC

Saacke UWIID

Niemcy

2000

używany

na żądanie

INNO29944

A Saacke CNC tool grinding machine including a Felsomat tool loader is available. Center height: 170mm, travel X: 580mm, feed X: 20m/min, table dimensions X/Y: 980mm/185mm, travel Z: 250mm, feed Z: 20m/min, travel Y: 250mm, feed Y: 10m/min. B-axis horizontal swivel: 240°, swivel speed: 120°/s, motor spindle diameter: 170mm, speed: 10000rpm, torque: 10.7Nm. Tool positions: 24, tool holder: HSK-C50, A-axis indexing accuracy: +/-15°, error at 100mm diameter: 8µm, workpiece holder: ISO 50, speed: 50rpm. Control: NUMROTOplus V.3.8.3m, resolution X/Y/Z: 0.0001mm, resolution A/B: 0.0001°. Includes Felsomat Robotal RE 01 loading unit with rotary indexing table, FB703 small extinguishing system, and Brinkmann FBS-238/50 screw spindle pump. Documentation available. An on-site inspection is possible.

Komórka szlifierska

Shl Schleifroboterzelle

Niemcy

2012

używany

na żądanie

INNO29943

A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible.

Szlifierka

Loewer SWG

Niemcy

2014

używany

na żądanie

INNO29844

An oscillating sander Löwer is available. Sanding diameter: 150mm, table dimensions X/Y: approx. 1400mm/1000mm, table height: 870mm, machine dimensions X/Y/Z: approx. 1700mm/1700mm/1300mm, weight: approx. 400kg. An on-site inspection is possible.

Szlifierki bezkłowe do wałków

Nomoco M40

Niemcy

1983

używany

na żądanie

INNO29837

Process: centerless plunge grinding, max. workpiece diameter: 20mm, max. workpiece length: 80mm, without automation by vibratory bowl. An on-site inspection is possible.

Szlifierka tarczowa

Timesavers Int. Bv GRINDMASTER 3000

Niemcy

2001

używany

na żądanie

INNO29830

Continuously adjustable feed speed: 2-10m/min, vacuum table with water separator, filter system with pump, also suitable for small parts up to 80x80mm, also suitable for printed circuit boards and carbide parts, no over-grinding of coated surfaces (e.g. Alclad, foils, galvanized sheets), spray nozzle centrally above the disc, additional water line for coolant, separate valves for coolant and spray nozzles. Total height: 3425mm, working height: 2025mm, working level: 790-940mm (adjustable), length: 2850mm, width: 1800mm, length of the middle segment: 900mm, side distances left/right: 755/900mm. No defects known, completely overhauled in 2017, in operation until 2020. Including centrifuge, documentation and maintenance reports. An on-site inspection is possible.

Szlifierka powierzchniowa

Majevica BRB 75.30.2KA

Niemcy

nieznany

używany

na żądanie

INNO29827

Longitudinal movement of the table manual drive: 750mm, longitudinal movement of the table hydraulic drive: 730mm, transverse movement of the table manual drive: 300mm, transverse movement of the table hydraulic drive: 290mm, usable surface of the table: 700x250mm, number of T-slots: 3, width of T-slots: 14mm, vertical movement of the grinding head: 400mm, division value of the grinding head manual drive: 0.01mm, distance between the inside of the grinding wheel and the column: 347.5mm, clearance under the new grinding wheel: 355mm, maximum grinding wheel diameter: 305mm, minimum grinding wheel diameter: 230mm, grinding wheel width: 25mm, grinding wheel bore: 127mm, division value of the cross table manual drive: 0.02mm, longitudinal feed of the table hydraulically: 2-25m/min, cross feed of the table stepwise, hydraulic and adjustable: 2-16mm/stroke, cross feed of the support hydraulically and continuous: 0.5-6m/min, volume of the hydraulic unit: 35l, cooling device for grinding wheel/on demand: 30l. No defects known, with documentation, an on-site inspection is possible.

Szlifierka powierzchniowa

Elb-schliff SWBD10 VAII-U

Niemcy

1967

używany

na żądanie

INNO29789

Max. grinding length: 1000mm, max. grinding width: 500mm, max. working height: 540mm, grinding spindle slide stroke vertical/ horizontal: 465/ 500mm, swiveling range: 1800°, table clamping surface: 1500/450mm, clamping slots number: 3, clamping slots distance: 125mm, clamping slots width: 16H7mm, table cross travel: 500mm, table longitudinal travel: 1000mm. Length: 4650mm, width: 2600mm, height: 2850mm, weight: 7.1t. With machine card. The electronics were renewed in 2022. An on-site inspection is possible.

Maszyna do szlifowania boków zębów

Reishauer RZ 362

Niemcy

2018

używany

na żądanie

INNO29757

A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible.

Szlifierka bezkłowa

Tschudin ecoLine 400 CNC

Niemcy

2013

używany

na żądanie

INNO29732

Grinding method: through-feed grinding/infeed grinding, max. workpiece diameter: 100mm, max. grinding length: 250mm, grinding wheel outer diameter: 400mm, inner diameter: 203.2mm, max. grinding wheel width: 250mm, circumferential speed: 50m/s, power: 11kW. Regulating wheel: outer diameter: 225mm, inner diameter: 127mm, width: 250mm, inclination angle: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Includes Kraft & Bauer fire extinguishing system, Knoll fine filter, and Streuli lifting station. Documentation available. An on-site inspection is possible.

Szlifierka do powierzchni CNC

Wagner FSG 1640 HD III

Niemcy

2015

używany

na żądanie

INNO29730

Grinding length: 1000mm, grinding height: 370mm, magnetic plate dimensions X/Y: 1000mm/400mm, grinding wheel dimensions X/Y/Z: 355mm/30mm/127mm, speed: 1750rpm, machine dimensions X/Y/Z: approx. 4000mm/1750mm/1950mm, weight: approx. 3500kg, control: Chevalier. Documentation available. An on-site inspection is possible.

Szlifierki do wałków

Carl Zeiss HKM 063

Niemcy

1986

używany

na żądanie

INNO29725

An old precision cylindrical grinding machine Carl Zeiss is available. Includes numerous accessories and tools. An on-site inspection is possible.

Szlifierka do noży

Mvm

Niemcy

2019

używany

na żądanie

INNO29707

An industrial knife grinding machine MVM for sharpening woodworking parts is available. Knife length: 6000mm, control: Siemens PLC with remote control. Includes an extraction system, a magnetic table, and a chip filter. Documentation available. An on-site inspection is possible.

Przecinarka CNC

Anthratec CUT 400 A

Niemcy

2020

używany

na żądanie

INNO29678

A CNC cut-off grinding machine Anthratec, previously used for cutting grids, is available. Cutting speed at 2000rpm: approx. 42m/s, speed range: 500–3500rpm, connected load: 30kW, control: Siemens S7-1200. Documentation available. An on-site inspection is possible.

Szlifierka do powierzchni CNC

Jung JA 500 CNC-C

Niemcy

1995

używany

na żądanie

INNO29665

A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible.