▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Maszyny do obróbki rur [1 - 17 of 17]

Instalacja do cięcia laserowego rur

Blm Group LT 8

Niemcy

2011

używany

na żądanie

INNO31495

Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement.

Maszyna do fazowania

Fritz Gross EBHA 60

Niemcy

2010

używany

na żądanie

INNO31361

A Fritz Gross pipe end processing machine is available. Connected load: 11kW, max. pipe diameter: 60mm, weight: approx. 1500kg. An on-site inspection is possible.

Maszyna do gięcia rur i profili

Haeusler HPR-12 V.H.

Niemcy

1966

używany

na żądanie

INNO31195

A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible.

Linia do obróbki rur

Weil Flexmaster LRSA 600

Niemcy

nieznany

używany

na żądanie

INNO30987

A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible.

Obcinarka do rur

Hgg SPC 330

Niemcy

2011

używany

na żądanie

INNO30978

A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible.

Giętarka do rur

Tracto-technik PBS Tubomat G 3001

Niemcy

2019

używany

na żądanie

INNO30638

A semi-automatic NC tube bending machine Tracto-Technik is available. Tube diameter: 48mm, max. tube length: 3000mm, max. material thickness: 4mm, max. bending angle: 180°, max. bending radius: 125mm, bending accuracy: +/-0.2°, bending speed: 20°/s. Machine dimensions X/Y/Z: approx. 3900mm/800mm/1250mm, weight: approx. 700kg, control system: Siemens Simatic. Documentation available. On-site inspection is possible.

Giętarka trzpieniowa

Transfluid DB 650ST

Niemcy

2005

używany

na żądanie

INNO30303

Bending direction: clockwise, steel tube diameter: 50mm, steel tube thickness: 3mm, stainless steel tube diameter: 50mm, stainless steel tube thickness: 2mm, max. section modulus: 5cm³, bending angle: 180°+10°, max. tube length: 2000mm, max. radius range: 150mm, bending height: 1050mm, bending head length: 850mm, min. bend spacing: 400mm, nominal pressure: 250bar, operating pressure: 200bar. Machine dimensions X/Y/Z: approx. 3200mm/1400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Giętarki do pierścieni

Kbb MB 30

Niemcy

2020

używany

na żądanie

INNO30218

Shaft bottom/top: 30mm/30mm, max. round tube length: 48mm, max. round tube diameter: 3mm, max. flat bar dimensions X/Y: 50mm/10mm, max. square tube dimensions X/Y/Z: 40mm/30mm/3mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

Giętarka trzpieniowa

Sommer S65

Niemcy

nieznany

używany

na żądanie

INNO30047

A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible.

Giętarka do rur CNC

Pulzer CNC 25L

Niemcy

1999

używany

na żądanie

INNO29902

Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible.

Giętarka do rur

Wafios/kuka RB20/KR 16-2 KRC 2

Niemcy

nieznany

używany

na żądanie

INNO29431

An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible.

Giętarka trzpieniowa

Transfluid DB2060BK

Niemcy

2017

używany

na żądanie

INNO29111

Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

Linia do spawania rur

Uhrhan & Schwill Innenschweißen

Niemcy

2013

używany

na żądanie

INNO28451

A welding system for welding metal pipes is available. Number of heads longitudinal seam/round seam: 3/3, workpiece inner diameter min./max.: 600mm/4500mm, max. workpiece length: 12700mm, max. workpiece weight: 50t, max. wire diameter: 4mm. Conveyor belt driven/rotating: 25t/25t. Head capacity: 2x AC 1000 and 1x DC 1200, including automatic brushing system. Documentation available. On-site inspection is possible.

Linia do spawania rur

Uhrhan & Schwill Außenschweißen

Niemcy

2013

używany

na żądanie

INNO28450

A welding system for welding metal pipes is available. Number of heads longitudinal seam/round seam: 3/3, 4th head: possible. Inner workpiece diameter min./max.: 600mm/4500mm, max. workpiece weight: 50t, max. wire diameter: 4mm. Conveyor belt driven/rotating: 25t/25t. Head capacity: 2x AC 1000 and 1x DC 1200, including automatic brushing system. Documentation available. On-site inspection is possible.

Maszyna do gięcia

Löcher/faccin/asdorfer Giotto 3000/HY1500

Niemcy

nieznany

używany

na żądanie

INNO28448

A complete bending line for the production of flange rings is available. Workpiece dimensions X/Y: 440mm/350mm, max. cross-section (S355 NL): 65000mm², max. flat steel length: 22000mm, max. outer ring diameter: 7000mm, max. inner ring diameter: 2320mm, max. ring weight: 11t. 1) Preheating furnace holes, machine dimensions X/Y/Z: approx. 1500mm/500mm/22000mm. 2) Faccin conveyor belt, length: 22000mm. 3) Ring bending machine Faccin Giotto 3000. 4) Flash butt welding machine Asdorfer HY 1500, power: 1500kVA. 5) Faccin handling system, max. ring diameter: 6500mm. Documentation available. On-site inspection is possible.

Giętarka do rur

Tracto-technik TUBOFORM

Niemcy

nieznany

używany

na żądanie

INNO26375

There are five identical machines available, an inspection is possible.

Giętarka do rur

Tracto-technik Gmbh TUBOTRON TN 30 511NR

Niemcy

2005

używany

na żądanie

INNO26374

Max. bending diameter: 30mm, an inspection is possible.