▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Prasy [1 - 20 of 83]

Hydrauliczny do gięcia krawędzi

Baykal APH 3106x120

Niemcy

1999

używany

na żądanie

INNO30654

A hydraulic press brake Baykal is available. Press force: 120t, bending length: 3100mm, motor power: 11kW, operating pressure: 240bar, piston stroke range: 130mm-180mm, max. upper tool weight: 103kg, max. lower tool weight: 180kg, max. overrun time: 80ms, min. safety distance: 130mm. Machine dimensions X/Y/Z: approx. 3500mm/1450mm/2300mm, weight: approx. 7200kg. Documentation available. An on-site inspection is possible.

Prasa do gięcia krawędzi CNC

Bystronic P225/410

Niemcy

2007

używany

na żądanie

INNO30611

A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Trumpf TrumaBend V 1300

Niemcy

nieznany

używany

na żądanie

INNO30495

Offered is a hydraulic CNC press brake year of manufacture approx. 2005. Press force: 1300kN, bending length: 3230mm, column distance: 2690mm, usable height: approx. 385-535mm, stroke: 215mm, control: Trumpf TASC 6000, CNC backgauge, multi-axis system X/R/Z1/Z2, hydraulic tool clamping, front bending supports Support consoles, safety device: BendGuard / light curtains. Maintenance: Regular maintenance carried out by Trumpf, last inspection approx. April 2025. Viewing possible by arrangement.

Hydrauliczny do gięcia krawędzi

Mengele D 200-32

Niemcy

1978

używany

na żądanie

INNO30411

An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement.

Prasa ekscentryczna

Knuth KEX 100

Niemcy

1992

używany

na żądanie

INNO30409

An eccentric press / punching press year approx. 1992 is offered. Viewing is possible by arrangement.

Prasa do gięcia krawędzi

Trumpf TrumaBend V50

Niemcy

1997

używany

na żądanie

INNO30342

Press force: 500kN, bending length: 1270mm, stroke: 215mm, max. operating pressure: 290bar, throat depth: 410mm, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 2000mm/2100mm/2500mm, weight: approx. 4750kg. Documentation available. An on-site inspection is possible.

Prasa śrubowa

Gustav Wolff SSP290

Niemcy

2006

używany

na żądanie

INNO30330

A screw press is available. Working capacity: approx. 64kNm, max. stroke: 250mm, nominal pressing force: 650t, max. pressing force: 750t, impact stroke: approx. 900t. Spindle diameter: 290mm, number of spindle starts: 3, max. stroke adjustment: 150mm, stroke rate: approx. 30min⁻¹. Frame opening: 730mm, max. installation height: 720mm. Ram area X/Y: 700mm/700mm, table area X/Y: 720mm/740mm. Machine dimensions X/Y/Z: approx. 4400mm/3150mm/2000mm, machine weight: approx. 30000kg. Upper and lower platen available. An inspection on site is possible.

Prasa do gięcia krawędzi CNC

Amada HFE M2 2204 L

Niemcy

2010

używany

na żądanie

INNO30270

A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible.

Prasa do tuszowania

Reis TUS 125 OK-100

Niemcy

1990

używany

na żądanie

INNO30214

A Reis spotting press for tool and mold making is available. Pressing force: 1000kN, clamping area: 1200mm/1500mm, installation height: 1575mm, max. mold weight: 10000kg, max. tilting plate load: 4000kg, ram stroke: 1450mm, return force: 400kN, hydraulic pressure: 190bar, pneumatic pressure: 5bar. Machine dimensions X/Y/Z: approx. 3200mm/4500mm/4100mm. Documentation available. On-site inspection possible.

Prasa dwukolumnowa hydrauliczna

Weingarten HQR 315

Niemcy

1994

używany

na żądanie

INNO30188

Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible.

Prasa dziurkująca

Ebu HK 80 FR

Niemcy

2016

używany

na żądanie

INNO30150

Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.

Prasa do gięcia krawędzi

Knuth AHK 3180

Niemcy

2005

używany

na żądanie

INNO30043

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

Prasa do gięcia krawędzi

Durma/knuth APH 1335

Niemcy

1993

używany

na żądanie

INNO29997

A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible.

Prasa ekscentryczna

Wmw PEEV 25

Niemcy

1963

używany

na żądanie

INNO29990

An old WMW single-column eccentric press is available. Pressing force: 25Mp, torque: 25kpm, shear area: 630mm², max. sheet thickness: 3.2mm, working capacity: 50kpm, pass-through sheet thickness: 1.6mm, working capacity: 25kpm, ram stroke: 5mm-60mm, max. table-to-ram distance: 400mm, stroke rate: 112 strokes/min, machine weight: approx. 1300kg. An on-site inspection is possible.

Prasa dwukolumnowa hydrauliczna

Dunkes HDZ 400/160/6.3

Niemcy

1994

używany

na żądanie

INNO29963

Pressing force: 4000kN, pressing pressure: 320bar, oil pressure: 250bar, blank holder force: 1600kN, blank holder stroke: 200mm, blank holder dimensions X/Y: 1000mm/800mm, blank holder ejector force: 160kN, ejector force: 63kN, ejector stroke: 100mm, overrun distance: 40mm, overrun time: 190ms. Documentation available. An on-site inspection is possible.

Prasa dziurkująca

Neu Dynamics Corp. CF5T

Niemcy

2004

używany

na żądanie

INNO29958

An NDC hydraulic punch is available. Weight: approx. 1750kg. An on-site inspection is possible.

Prasa do gięcia krawędzi CNC

Darley MF 2502

Niemcy

2000

używany

na żądanie

INNO29752

Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.

Prasa krawędziowa

Lvd PPBL-H 100-40/PPBL-H 165-40

Niemcy

1993

używany

na żądanie

INNO29715

Two press brakes LVD are available. 1) Press brake LVD PPBL-H 100/40, year of manufacture: 1993, pressing force: 1000kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 130mm, table-to-ram distance: 310mm, throat depth: 200mm, table width: 180mm, table-to-floor distance: 910mm, closing speed: 80mm/s, working speed: 8mm/s, return speed: 60mm/s, oil capacity: 120l, weight: approx. 8200kg. 2) Press brake LVD PPBL-H 165/40, year of manufacture: 1993, pressing force: 1650kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 150mm, table-to-ram distance: 350mm, throat depth: 250mm, table width: 180mm, table-to-floor distance: 930mm, closing speed: 80mm/s, working speed: 7.5mm/s, return speed: 70mm/s, oil capacity: 150l, weight: approx. 10500kg. Documentation available. An on-site inspection is possible. Sale of individual units is possible.

Prasa hydrauliczna

Exner EEX 80 ZR

Niemcy

1989

używany

na żądanie

INNO29711

Drive power: 23kW, pressing force: 800kN, overrun distance: 25mm, overrun time: 93ms, safety distance: 148mm, oil capacity: 650l, weight: approx. 7000kg. Includes a Sick safety light curtain. An on-site inspection is possible.

Prasa do gięcia krawędzi

Hämmerle AP 200-2600

Niemcy

1991

używany

na żądanie

INNO29579

A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.