▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka blachy stalowej [1 - 20 of 86]

Nożyce do blachy

Haco HSLX 4008

Niemcy

1997

używany

na żądanie

INNO29343

A Haco hydraulic shear is available. Working width: 4000mm, max. sheet thickness: 8mm, cutting angle range: 0.5°-3°, stroke rate: 11 strokes/min, backgauge: 1000mm, machine dimensions X/Y/Z: approx. 5000mm/2000mm/1800mm. On-site inspection is possible.

Nożyce do blachy

Eht TSS 4-31

Niemcy

1987

używany

na żądanie

INNO29331

An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible.

Walcownia

Bühler VRW 160/80x120

Niemcy

2001

używany

na żądanie

INNO29318

A Bühler reversing strip rolling mill retrofitted in 2020 is available. Working speed: 10m-50m/min, working direction: reversing. Quarto roll stand: backing roll diameter: 160mm, working roll diameter: 80mm, roll bale width: 80mm, drive power: 20kW, setting speed min./max.: 2mm/min/25mm/min, brush diameter: 125mm. Reversing coiler drum diameter: 500mm, reversing coiler belt tension: 1000N-8000N, reversing coiler power: 30kW, material rewinding spread range: 300mm-600mm, cooling lubricant system power: 35kW. Tolerance for measuring length 8mm/50mm: +/-0.5µm and +/-1.5µm, absolute thickness tolerance: +/-30µm. Material width min./max.: 20mm/60mm, max. material thickness: 2mm, coil inner diameter: 500mm, coil outer diameter: 750mm, max. coil weight at strip width 40mm: 75kg. Operating hours of the system since the retrofit (2020): 91h. Documentation available. On-site inspection is possible. Expected to be available from September 2025.

Nitownica

Stanley Tucker T290 ERT 80

Niemcy

2016

używany

na żądanie

INNO29292

Two similar Stanley riveting punches are available. Both machines include rivet dispensers ERF 23 and 23.1. An on-site inspection is possible.

Kołowrotek

H. Schleicher H-3

Niemcy

1978

używany

na żądanie

INNO29218

Max. coil weight: 3t, max. strip width: 500mm, strip thickness: 0.4-5mm, connected load: 0.55kW. With control, straightener and hydraulic unit Rexroth, without documentation. On-site inspection is possible.

Maszyna do wykrawania i cięcia laserowego

Boschert CombiLaser TWIN 1500x3000 2kW

Niemcy

2016

używany

na żądanie

INNO28426

A hardly used fiber laser and punching machine Boschert including peripheral devices, overhauled by the original manufacturer in 2022, is available. 1) Boschert CombiLaser TWIN 1500x3000 Rotation, year of manufacture: 2016, punching heads: 2, punching force: 28t, processing range X/Y: 1500mm/3000mm, control: LABOD. 2) Fiber laser Kjellberg X-Focus 2000, year of manufacture: 2016, power: 2000W, cutting capacity mild steel/alloyed steel/aluminum: 15mm/8mm/6mm, laser class: 4, wavelength range: 1060nm-1100nm, weight: approx. 380kg. 3) Teka FilterCube 2N-3500, year of construction: 2016, air flow rate at 3000Pa: 3500m³/h, filter cartridges: 2, filter area per filter cartridge: 10m². Total system dimensions X/Y/Z: approx. 6500mm/5000mm/2100mm, weight: approx. 16200kg, system operating hours: 1265h, hydraulic hours: 361h, laser hours: 71h. Including Boschert Revotool 8-fold and various wear parts. Documentation available. On-site inspection is possible. Expected to be available from March 2025.

Szczotkarka do stali

Lissmac SBM-M 1500 B2

Niemcy

2014

używany

na żądanie

INNO29172

A Lissmac steel brushing and deburring machine is available. Passage width: 1500mm, max. sheet thickness: 20mm, medium: brushing block, machine dimensions X/Y/Z: approx. 3100mm/1400mm/1800mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible.

Wykrawarka CNC

Amada EMK 3610 NT/MP300 M

Niemcy

2007

używany

na żądanie

INNO29137

An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible.

Linia cięcia na długość

Fröhling 30/600 B

Niemcy

1973

używany

na żądanie

INNO29094

A complete cut-to-length line (coil line) for sheet metal processing, specifically for coils, is available. Product information: Material: stainless steel strip, max. strength at 2mm thickness: approx. 70kp/mm², max. elongation at 70kp/mm²: 50%, strip width range: 100mm-500mm, strip thickness range: 0.3mm-2.5mm, sheet lengths: 250mm/1000mm/4000mm/10000mm, strip speed range: 7.5m-30m/min, hydraulic operating pressure: approx. 80bar, pneumatic operating pressure: approx. 4bar, clarification sheet length: over 250mm: Feed and shear adjustment, over 1000mm: with mechanical intermittent operation, over 4000mm: with electrical on/off operation. 1) Decoiler, max. outer coil diameter: 1400mm, inner coil diameter: 400mm/500mm/600mm, decoiler drum spreading range: 370mm-620mm, spreading cylinder diameter: 125mm, spreading cylinder stroke: 40mm, spreading segment useful width: 600mm, max. strip weight: approx. 3000kp, max. strip tension: approx. 400kp, decoiler displacement: +/-100mm. 2) Kohler straightening machine, straightening roller diameter: 30mm, bale length: approx. 600mm, number of straightening rollers: 21, feed rate: 7.5m-30m/min, strip width range: 100mm-500mm, strip thickness range: 0.3mm-2.5mm. 3) Flying hydraulic shears, material/strip thickness/speed: to suit the system, number of cuts: 30 cuts/min, sheet length range: 250mm-1000mm, blade width: 600mm. 4) Conveyor belt, belt width: 600mm, center distance: 3500mm. Documentation available. On-site inspection is possible.

Linia wykrawająco-giętarka

Schaal 2372 D-FPS

Niemcy

1989

używany

na żądanie

INNO29081

A Schaal (Dreher) strip punching machine with bending facility is available. Plant components: punching machine, reel, straightening machine, hydraulic unit. The machine was used to produce end parts for sheet metal bodies. The bending cylinder of the machine is leaking and losing oil. Documentation available. An on-site inspection is possible.

Wykrawarka laserowa CNC

Trumpf Trumatic 600L

Niemcy

1995

używany

na żądanie

INNO29071

A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible.

Maszyna wykrawająca

Trumpf TRUMATIC 500

Niemcy

2000

używany

na żądanie

INNO29030

Working range X/Y: 2500mm/1300mm, max. workpiece weight: 150kg, stroke rate: 900 strokes/min, max. sheet thickness: 8mm, max. punching force: 220kN, max. Punching diameter: 76.2mm, speed X/Y/simultaneous: 90m/60m/108m/min, C-axis: 360°/s, positioning accuracy: +/-0.1mm, position spread: +/-0.03mm, tool positions: 20. Machine dimensions X/Y/Z: approx. 6900mm/5800mm/2200mm, weight: approx. 11000kg, control: Trumagraph CC 220 S. The machine is not functional. Documentation available. On-site inspection is possible.

Nożyce gilotynowe

Durmazlar DHGM 4006

Niemcy

1996

używany

na żądanie

INNO29021

Working width: 41100mm, max. sheet thickness: 6mm, stroke: 131mm, stroke rate: 12/min, max. pressure: 150bar, oil tank capacity: 250l, control: ELGO Electric, motor power: 18.5kW, length: 4750mm, width: 2350mm, height: 1950mm, weight: 12t. On-site inspection is possible.

Wykrawarka

Hms EwZ 03 S7 90/GKNT 250

Niemcy

1990

używany

na żądanie

INNO28875

An HMS punching machine is available. Pressing force: 250t, stroke height: 40mm, installation height: 450mm, ram adjustment: 20mm, stroke rate: 120 strokes/min, overall system dimensions X/Y/Z: approx. 17000mm/8000mm/3500mm. Including coil and strip processing. Documentation available. On-site inspection is possible. Expected to be available from September 2025.

Wykrawarka CNC

Amada/lki EMZ3610NT/MP Sheetcat 3015

Niemcy

2010

używany

na żądanie

INNO28848

A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. On-site inspection is possible.

Centrum obróbcze do blach CNC

Salvagini

Niemcy

2008

używany

na żądanie

INNO28846

A complete sheet metal processing center for bending and cutting including automation is available. Documentation available. On-site inspection is possible.

Nożyce gilotynowe CNC

Durmazlar (durma) VS 3016 (3100x16)

Niemcy

2015

używany

na żądanie

INNO28808

Eine hydraulische CNC-Blechschere Durma (Durmazlar) ist verfügbar. Arbeitsbreite: 3080mm, max. Blechdicke bei 450N/mm² und 700N/mm²: 16mm/12mm, Schnittwinkel: 0,5°-2,5°, Niederhalter: 14, Hinteranschlag: 1000mm, Hinteranschlaggeschwindigkeit: 200mm/s, Hub: 175mm, Hubzahl: 8-18 Hübe/min, Ölkapazität: 500l. Maschinenabmessungen X/Y/Z: ca. 3300mm/4200mm/2850mm, Gewicht: ca. 18150kg, Steuerung: Durma DT-7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

Obracarka pustych stosów

Intec Blechplatinen

Niemcy

2006

używany

na żądanie

INNO28791

A blank turner for sheet metal blanks is available. Max. Blank dimensions X/Y: 1600mm/1100mm, max. blank stack height: 190mm, max. stack weight: 1500kg, max. stack inclination: 15°, cycle time with pallets: approx. 30s, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2500mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

Nożyce gilotynowe

Schröder MHSU-V 2500/3

Niemcy

2000

używany

na żądanie

INNO28720

Working width: 2550mm, max. sheet thickness: 3mm, cutting angle: 1.7°, stroke rate: 34/min, power: 4kW, weight: approx. 3000kg. The machine has been calibrated several times, but still has inaccuracies that cannot be rectified. Documentation available. On-site inspection is possible.

Wykrawarka laserowa CNC

Trumpf Trumatic 6000L (TC 6000)

Niemcy

2006

używany

na żądanie

INNO28663

Working range X/Y: 2585mm/1650mm, punching force: 220kN, laser power: 3200W (3.2kW), max. material thickness: 8mm, max. workpiece weight: 200kg, tool positions: 21, positioning speed X/Y: 90m/60m/min, simultaneous: 108m/min. Punching capacity: 900 strokes/min, marking capacity: 2800 strokes/min, laser hours: 14061h, operating hours: 81068h. The laser equipment of the machine has not been used for 8 years, only the punching capacities. Documentation available. On-site inspection is possible. Expected to be available from the end of May 2025.