▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Technologia powierzchniowa [1 - 20 of 51]

System czyszczący

Ama Universal Multimatic LM 150

Niemcy

1993

używany

na żądanie

INNO31794

A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible.

System czyszczący

Mafac Elba

Niemcy

2023

używany

na żądanie

INNO31769

A Mafac two-tank spray flood cleaning machine is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, tank volume 1/2: 425l/300l, machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 1000kg, operating hours: 4531h. Documentation available. An on-site inspection is possible.

Linia do powlekania metodą PVD

Platit Pi111 Plus G3

Niemcy

2023

używany

na żądanie

INNO31766

A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible.

Maszyna do czyszczenia laserowego

Sitolaser/xt Laser LC-200S

Niemcy

2020

używany

na żądanie

INNO31691

A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible.

System czyszczenia ultradźwiękowego

Hgh US160-1K

Niemcy

2023

używany

na żądanie

INNO31685

An HGH ultrasonic cleaning system is available. Chamber dimensions X/Y/Z: 600mm/500mm/400mm, basket dimensions X/Y/Z: 570mm/470mm/290mm, usable volume: approx. 120l, tank volume: 160l, ultrasonic power: 1200W. Documentation available. An on-site inspection is possible.

Śrutownica

Poltech Engineering

Niemcy

2015

używany

na żądanie

INNO31667

A Poltech blast chamber system with manual blasting media application is available. Blast chamber dimensions X/Y/Z: approx. 6000mm/4000mm/3000mm, external dimensions X/Y/Z: approx. 14000mm/6500mm/5000mm. Documentation available. An on-site inspection is possible.

Maszyna do mikrofinisowania

Thielenhaus Cube 650

Niemcy

2023

używany

na żądanie

INNO31639

A Thielenhaus microfinish/superfinish machine for precision surface finishing of rotationally symmetrical components such as shafts, camshafts, crankshafts, and similar precision parts is available. Application range: shaft machining, max. machining length: 750mm, max. workpiece diameter: 100mm, max. travel: 650mm. Machine dimensions X/Y/Z: approx. 2100mm/1450mm/2050mm, weight: approx. 1800kg. Including SL50 belt finishing unit, Elbaron RON 60 SV oil mist extraction system, and workpiece holder. Documentation available. An on-site inspection is possible. The machine was used for sample machining and has hardly run.

Instalacja do galwanizacji i powlekania

Schering DYNA-PLUS

Niemcy

1989

używany

na żądanie

INNO31501

Processes: nickel strike, alkaline/cyanide zinc plating, base material: steel, stainless steel, throughput capacity for racks: approx. 11/h, production time: operating time minus rack cycle time, drums per rack: 1, internal drum length: 870mm, width across flats: 350mm, average loading weight per drum: approx. 37kg, max. loading weight per drum: approx. 50kg, the loading weight depends on the geometric surface area of the parts, anode distance: 650mm (700mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heating-up time: approx. 5h at an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, city water: 2bar, circulating water: 2bar, compressed air: 8bar, drive/control power: approx. 166kVA, rectifier power: approx. 240kVA, heating power: approx. 136kW, extracted air volume: cyan./alk. 12,000m³/h, acidic/alk. 19,450m³/h, dissipated heat quantity: approx. 80,000kcal/h, the system has been emptied of all substances, transformers are free from hazardous materials, complete documentation available. An on-site inspection is possible.

System czyszczący

Multimatic FP-50-V

Niemcy

2005

używany

na żądanie

INNO31417

Cleaning medium: perchloroethylene, treatment chamber dimensions: 690x740x277mm, basket holder dimensions: 400x620x410mm, max. loading weight: 80kg, basket speed: 2-4/min, usable volume tank 1/2: 270/160l, solvent capacity: 450l, compressed air connection: 6bar, control: Siemens SIMATIC OP17, length: 2550mm, width: 1900mm, height: 2500mm, weight: 3.2t, with documentation. An inspection on site is possible.

System czyszczący

Bous Trowamat 4765/30 WT

Niemcy

2013

używany

na żądanie

INNO31360

A Bous spray cleaning system is available. Usable space dimensions X/Y/Z: 470mm/650mm/300mm, max. material weight: 100kg, filling quantity: 500l, max. temperature: 70°C, heating capacity: 18kW, exhaust connection diameter: 108mm, drying capacity: 11kW, weight: approx. 1600kg. Including loading station and oil separator. Documentation available. An on-site inspection is possible.

Elektrownia wodna

Rösler FKS 15.1 AS

Niemcy

nieznany

używany

na żądanie

INNO31284

Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible.

Maszyna do czyszczenia części

Pero KDA50WSNT

Niemcy

2011

używany

na żądanie

INNO31189

An industrial multi-bath continuous spray cleaning system Pero for components is available. Belt width: 500mm, clearance height: 300mm, max. belt load: 40kg/m, loading height: 900mm, belt speed: 2.8m/min, cleaning volume flow: 320l/min, cleaning pressure: 2bar, machine dimensions X/Y/Z: approx. 5100mm/2100mm/2300mm. Documentation available. An on-site inspection is possible.

System czyszczący

Render W 91 TH4 ST

Niemcy

2007

używany

na żądanie

INNO31188

A top-loading batch cleaning system Render is available. Pump capacity: 140l/min, cleaning bath fill volume: 130l, max. operating temperature: 130°C, load capacity: 120kg, connected load: 16kW, machine dimensions X/Y/Z: approx. 1350mm/1200mm/1350mm, weight: approx. 350kg. Includes a transport cart. Documentation available. An on-site inspection is possible.

System czyszczący

Mea L160

Niemcy

1998

używany

na żądanie

INNO31068

Basket dimensions: 1100x1100mm, usable height: 800mm, max. load weight: 700kg, spray pressure: 4.3bar, ambient temperature: 5-40°C, max. washing temperature: 90°C, material of media-contact parts: stainless steel V2A, power connection: 55A. With control cabinet and documentation. An on-site inspection is possible.

Urządzenie do znakowania laserowego

Acsys Piranha III Multi FL20

Niemcy

2011

używany

na żądanie

INNO31021

A CNC laser marking and engraving system for component marking is available. Laser class: 1, laser type: diode-pumped Yb laser, laser power: 20W, axis travel X/Y/Z: 390mm/560mm/275mm, max. workpiece dimensions X/Y/Z: 730mm/365mm/445mm, max. workpiece weight: 50kg, control system: AC-Laser. Documentation available. An on-site inspection is possible.

Maszyna do wydmuchiwania

Munder M-Air-217-1400

Niemcy

2019

używany

na żądanie

INNO31017

An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible. Expected to be available June 2026.

Lakiernia

B+m/carel/hygrex T2/LZ/APRA/AGMD

Niemcy

2019

używany

na żądanie

INNO30980

A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible.

System czyszczący

Wache 1-Kammer

Niemcy

1996

używany

na żądanie

INNO30974

An alkaline based single chamber cleaning system wash system is available. Containers: 3, total tank volume: 12.9m³, working dimensions X/Y/Z: approx. 8000mm/1200mm/1600mm, overall system dimensions X/Y/Z: approx. 19500mm/7200mm/4300mm. Documentation available. An on site inspection is possible.

Laminator

Softal CMIE-125-1KB3

Niemcy

2023

używany

na żądanie

INNO30962

A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible.

Śrutownica

Rösler RBD 600-2/4 / RF 550 NS

Niemcy

2013

używany

na żądanie

INNO30805

A Rösler continuous belt shot blasting system is available. Rated power: 72kW, abrasive filling quantity: 1500kg, blasting capacity: 600kg/min, blast wheels: 4, blast wheel type: H28HM, total system dimensions X/Y/Z: approx. 12400mm/3800mm/2300mm, max. single component weight: 6000kg. Documentation available. An on-site inspection is possible.