▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Frezarki [1 - 20 of 125]

Frezarka uniwersalna CNC

Maho MH 600 W

Niemcy

nieznany

używany

na żądanie

INNO31841

A Maho universal milling machine overhauled in 2020 is available. Travel X/Y/Z: 600mm/400mm/400mm, table dimensions X/Y: 900mm/460mm, max. table load: 250kg, tool holder: SK40, tool positions: 16, spindle speed: 4500rpm, feed rate: 4m/min, rapid traverse: 5m/min. Machine dimensions X/Y/Z: approx. 2450mm/3200mm/1900mm, weight: approx. 2800kg, control: Maho CNC 234. The machine has a suspected defect on the control board. Documentation available. An on-site inspection is possible.

Frezarka CNC

Dmg Mori DMU 70V

Niemcy

2008

używany

na żądanie

INNO31820

A CNC vertical milling machine DMG in need of repair is available. Travel X/Y/Z: 750mm/600mm/520mm, table diameter: 700mm, swivel B: -5°/110°, max. workpiece diameter: 800mm, max. workpiece height: 590mm, max. workpiece weight: 350kg, tool holder: SK40, speed: 14000rpm, tool positions: 30, rapid traverse: 24m/min, feed: 20m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.006mm. Machine dimensions X/Y/Z: approx. 5600mm/5000mm/3000mm, weight: approx. 6000kg, control: Heidenhain iTNC530 3D, operating hours: approx. 62250h, spindle hours: approx. 15550h. The geometry of the machine must be checked and it shows deviations in the axes, including the rotary axis. Documentation available. An on-site inspection is possible.

Frezarka CNC

Saeilo MMV 1100

Niemcy

2008

używany

na żądanie

INNO31818

A CNC vertical machining center by Saeilo requiring repair is available. Travel X/Y/Z: 1120mm/700mm/700mm, table dimensions X/Y: 1200mm/700mm, max. table load: 1000kg, spindle nose to table distance range: 100mm-800mm, tool holder: SK40, power: 16.5kW, tool stations: 30, rapid traverse: 20m/min, feed rate: 15m/min, positioning accuracy: +/-0.005mm, repeatability: +/-0.003mm. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2650mm, weight: approx. 7800kg, control: Heidenhain, operating hours: approx. 50550h, spindle hours: approx. 13000h. The machine geometry must be checked. Furthermore, the tool changer is sticking, leaking oil and the lighting has defects. Documentation available. An inspection on site is possible.

Frezarka portalowa CNC

Kao-ming KMC 3000 SD

Niemcy

2007

używany

na żądanie

INNO31817

A CNC gantry milling machine Kao-Ming requiring repair is available. Travel X/Y/Z: 3200mm/1400mm/700mm, table dimensions X/Y: 3000mm/1250mm, column clearance: 1500mm, spindle nose-to-table distance range: 200mm-900mm, max. table load: 8000kg, tool holder: BT50, speed: 5200rpm, tool positions: 30, rapid traverse: 12m/min, feed rate: 8m/min. Machine dimensions X/Y/Z: approx. 8100mm/4100mm/3800mm, weight: approx. 23000kg, control: Heidenhain iTNC530, operating hours: approx. 23000h, spindle hours: 8210h. The machine geometry must be adjusted. Furthermore, the tool changer occasionally jams, and the spindle has an oil leak. Documentation available. An on-site inspection is possible.

Frezarka narzędziowa CNC

Ops Ingersoll OPS 650

Niemcy

2008

używany

na żądanie

INNO31807

A CNC high-speed machining center OPS Ingersoll in gantry design is available. Materials: graphite/copper/aluminum/plastics/hard machining, travel X/Y/Z: 700mm/550mm/450mm, table dimensions X/Y: 850mm/700mm, max. workpiece weight: 2000kg, tool holder to table distance range: 20mm-520mm, tool holder: HSK-E40, spindle: Fischer mW 9/10-4, speed: 42000rpm, spindle power: 17kW, spindle runout accuracy: µm, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2500mm/2700mm, weight: approx. 9000kg, control: Andronic 2060. Documentation available. An on-site inspection is possible.

Frezarka narzędziowa CNC

Maho MH 600 E2

Niemcy

nieznany

używany

na żądanie

INNO31682

A Maho CNC universal tool milling machine is available. Travel X/Y/Z: 600mm/400mm/450mm, table dimensions X/Y: 900mm/450mm, max. table load: 400kg, tool holder: SK40, speed: 4000rpm, feed rate: 4m/min, rapid traverse: 5m/min, tool stations: 20, milling head swivel range: +/-90°. Machine dimensions X/Y/Z: approx. 2450mm/3200mm/1900mm, weight: approx. 3200kg, control: Maho CNC 432, operating hours: 62908h. An on-site inspection is possible.

Frezarka narzędziowa CNC

Maho MH 600 C

Niemcy

nieznany

używany

na żądanie

INNO31681

A Maho CNC universal milling machine is available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: SK40, table diameter: 630mm, speed: 3150rpm, feed rate: 4m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3000mm/2800mm/2200mm, weight: approx. 3500kg, control system: Philips CNC 432. An on-site inspection is possible.

Frezarka uniwersalna

Malick & Walkows 1000x300

Niemcy

1970

używany

na żądanie

INNO31675

A conventional universal milling machine Malick & Walkows is available. Table dimensions X/Y: 1000mm/300mm, speed: 1120rpm, travel X/Y/Z: 900mm/300mm/500mm, quill stroke: 80mm, feed rate: 250mm/min, machine dimensions X/Y/Z: approx. 1700mm/1900mm/1700mm, weight: approx. 1750kg. Including machine vise and accessories. An on-site inspection is possible.

Frezarka uniwersalna CNC

Maho MH 500 W

Niemcy

1991

używany

na żądanie

INNO31655

Travel X/Y/Z: 500mm/380mm/350mm, tool holder: SK40, quill stroke: 50mm, speed: 4000rpm, feed: 2m/min, rapid traverse: 4m/min, table dimensions X/Y: 800mm/360mm, max. table load: 250kg. Machine dimensions X/Y/Z: approx. 1650mm/2250mm/1850mm, weight: approx. 1800kg, control: Maho 232. The Y-axis shows a malfunction from a feed rate of 50%. Documentation available. An on-site inspection is possible.

Frezarka CNC

Optimum OPTI mill F 105

Niemcy

2017

używany

na żądanie

INNO31622

X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening width: 1055mm, foundation/installation area: 1520x2080mm, weight: 2.8t. An on site inspection is possible.

Frezarka narzędziowa CNC

Union Bielefeld UWF 3.2 CNC

Niemcy

1989

używany

na żądanie

INNO31577

Weight: 1.5t, operating hours unknown, with documentation, machine vices and fixtures are available as accessories, the machine ran in one shift operation and was serviced regularly. An inspection on site is possible.

Frezarka

Mikron WF 31C/155

Niemcy

nieznany

używany

na żądanie

INNO31559

Rotational speed: 0-3150/min, power supply: 20A, connected load: 9kW, control: Heidenhain TNC 155, length: 2700mm, width: 2900mm, height: 2000mm, weight: 2.3t. An on-site inspection is possible.

Frezarka

Mikron WF 32CH/ TNC 355

Niemcy

nieznany

używany

na żądanie

INNO31558

X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible.

Frezarka CNC

Friedrich Deckel FP4 AT

Niemcy

1987

używany

na żądanie

INNO31545

Number of T-slots: 8, rated current: 23A, controls: CONTOUR 3, with tool magazine. An on-site inspection is possible.

5-osiowa frezarka CNC

Deckel Maho DMG DMU 100-T

Niemcy

nieznany

używany

na żądanie

INNO31542

X-axis: 1080mm, y-axis: 710mm, z-axis: 710mm, speed range: 1-12,000/min, max. table load: 550kg, NC rotary table diameter integrated into the fixed table: 800mm, table dimensions: 1500x800mm, number of tool positions: 32, tool holder: SK 40 DIN 69872, connected load: 15kW, control system: Heidenhain TNC 430, operating hours: 63,619h, spindle hours: 22,552h, with controlled NC swivelling milling head B-axis, active cooling for the B-axis motor spindle, handwheel, operating mode 4, the hard drive drive amplifier was replaced in January 2025. An on-site inspection is possible.

Frezarka CNC

Haas TM-1H

Niemcy

2006

używany

na żądanie

INNO31527

Number of axes: 3, table dimensions: 1210x267mm, max. spindle speed: 4000rpm, weight: approx. 2t. An on-site inspection is possible.

Frezarka uniwersalna

Index SV4

Niemcy

nieznany

używany

na żądanie

INNO31490

A tool milling machine is offered. Travel range X/Y: approx. 400mm/200mm, spindle speed: 224-2240rpm (6 steps), feeds: 0.10-0.71mm/rev, tool holder: MT/SK, control: manual. Equipped with vertical milling head, adjustable compound table, mechanical handwheels. Inspection possible by arrangement.

Frezarka pionowa

Bernhard Steinel SV 4g

Niemcy

1969

używany

na żądanie

INNO31487

Offered is a universal tool milling machine. Working area X/Y/Z: approx. 330mm/145mm/370mm, table clamping surface: 630mm × 180mm, spindle speeds: 63-3150rpm (across 8 steps), spindle mount: SK 30, connected load: 380V/16A, control: manual. Equipped with swiveling vertical head, manual axis feed via handwheels, T-slot table, integrated chip support tray. Overall dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm. Inspection possible by arrangement.

Frezarka pozioma

Fritz Werner HF 1.6

Niemcy

1977

używany

na żądanie

INNO31485

Offered is a universal knee-type milling machine. Working area X/Y/Z: approx. 710mm/250mm/430mm, table clamping surface: 1250mm/315mm, spindle mount: ISO 40, speed range: 45-2000rpm (18 steps), feed rate: 10-1000mm/min, rapid traverse: available, control: conventional with electrical program control (PFAFF panel). Equipped with horizontal milling spindle, manual support bracket for long milling arbors, hydraulic pressure accumulator system, coolant device, chip collection tray, central lubrication. Weight: approx. 2100kg, overall dimensions X/Y/Z: approx. 1950mm/1750mm/1850mm. Inspection possible by arrangement.

Frezarka CNC

Cmc BF-01

Niemcy

1992

używany

na żądanie

INNO31450

A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement.