▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Obróbka metali i obrabiarki / Centra obróbcze

Innovac maszyny-uzywane

Centra obróbcze [1 - 20 of 137]

Centrum obróbcze CNC

Matec 30HV

Niemcy

1999

używany

na żądanie

INNO32355

Travel X/Y/Z: 2000mm/600mm/800mm, rapid traverse: 30m/min, feed rate: 30m/min, max. spindle speed: 9000rpm, tool holder: SK40, tool positions: 48, clamping plate: 650×2500mm, control: Bosch Type 3 OSA. Documentation available. An on-site inspection is possible.

Uniwersalne centrum obróbcze CNC

Mikron UMC 600

Niemcy

1996

używany

na żądanie

INNO32346

A Mikron CNC universal machining center in need of repair is offered. Operating voltage: 400V, frequency: 50Hz, rated current: 40A, control voltage: 24V DC, control: Heidenhain TNC 426, weight: approx. 5800kg. The tool changer is defective and the hydraulic accumulator is empty or defective. The machine has been used in production in single-shift operation with these limitations in recent years. The tools were changed manually, otherwise the machine can be operated. An on-site inspection is possible.

Maszyna do dekoracji CNC

Rewitech Sa MCU

Niemcy

2007

używany

na żądanie

INNO32345

Controls: EIP, voltage: 230V, connected load: 3kVA, with CE marking. An on-site inspection is possible.

Centrum obróbcze CNC

Almac CU 3005 FANUC 16 IKB

Niemcy

2008

używany

na żądanie

INNO32344

Number of axes: 3, control: FANUC, connected load: 10kVA, weight: 3.7t, an on-site inspection is possible.

Pionowe centrum obróbcze CNC

Willemin-macodel W 408S

Niemcy

2008

używany

na żądanie

INNO32342

Two Willemin-Macodel W 408 and four Willemin-Macodel W 408S are available, year of manufacture W 408: 1997, 2002, year of manufacture W 408S: 2005, 2006, 2007, 2008, an on-site inspection is possible.

Centrum obróbcze CNC

Brother TC-S2C

Niemcy

2007

używany

na żądanie

INNO32328

X-axis: 500mm, connected load: 30.8kVA, length: 1624mm, width: 1560mm, height: 2829mm, weight: 2.4t, operating hours: 8,840h, power-on time: 89,352h, total operating hours: 28,840h, an on-site inspection is possible.

Pionowe centrum obróbcze CNC

Hurco BMC 2416/DSM

Niemcy

1999

używany

na żądanie

INNO32254

Travel X/Y/Z: 610mm/406mm/508mm, max. spindle speed: 8000rpm, spindle power: approx. 7.5kW, rapid traverse X/Y: 24m/min, rapid traverse Z: 15m/min, spindle taper: SK40, tool capacity: 24, table dimensions X/Y: 750mm/400mm, max. table load: approx. 350kg, control: Hurco Ultimax 4 Dual Screen. Weight: approx. 4000kg. An on-site inspection is possible.

5-osiowe centrum obróbcze CNC

Kern Triton

Niemcy

2010

używany

na żądanie

INNO32213

A KERN 5-axis CNC machining center with EROWA Robot Compact is offered. Travel X/Y/Z: 500mm/500mm/400mm, simultaneous 5-axis machining, hydrostatic guideways in the X and Y axes, swivel range: -10° to +110°, feed rate X/Y/Z: 30m/min, max. acceleration: 10m/s², max. spindle speed: 40000rpm, spindle power: 37kW, max. torque: 12000rpm, tool taper: HSK-E40, tool magazine: 50, tool change time: approx. 3s, control: Heidenhain iTNC 530 smart.TNC, laser tool measurement, workpiece touch probe, EROWA PowerChuck P, EROWA Robot Compact year of manufacture 2013 with 70 magazine positions, including 55 positions ITS 72 and 15 positions ITS 148, max. transfer weight pallet incl. workpiece: 30kg, automatic loading and unloading of the magazine also possible during machining, machining medium: oil, belt filter system and max. high-pressure supply 80bar, oil mist extraction system and fire extinguishing system available, machine power-on hours: approx. 86589h, spindle operating hours: approx. 66997h. The machine is available from November 2026. Documentation available. Inspection possible by arrangement.

Pionowe centrum obróbcze CNC

Deckel Maho DMC 64V linear

Niemcy

2007

używany

na żądanie

INNO32199

X-axis: 640mm, Y-axis: 600mm, Z-axis: 500mm, feed force (40% duty cycle) X-, Y-, Z-axis: 7000N, max. feed speed X-, Y-, Z-axis: 40m/min, rapid traverse speed Y-, Z-axis: 40m/min, rapid traverse speed X-axis: 70m/min, ball screw diameter/pitch Y-, Z-axis: 40/15mm, number of magazine pockets: 30, position coding: fixed-position coding, max. tool loading weight: 90kg, max. diameter of standard tools: 100mm, max. diameter of special tools with adjacent positions free: 140mm, max. tool length: 300mm, max. tool weight: 6kg, table clamping surface: 850x600mm, T-slots: DIN 650-14, loading height (top edge of table): 850mm, max. load: 600kg, connected load: 39kVA, control: Heidenhain iTNC 530, length: 2500mm, width: 4100mm, height: 3000mm, weight: 7,74t, operating hours: 60.366h. With documentation.

Centrum obróbcze CNC

Matec 30 HV

Niemcy

nieznany

używany

na żądanie

INNO32198

T-slot system: 18 H8, working spindle: SK40, length: 5000mm, width: 3240mm, height: 3800mm, basic machine weight: 1,5t, machine-on operating hours: 31.546h, control-on operating hours: 56.903h, program run time: 10.521h, with documentation. An on-site inspection is possible.

Centrum obróbcze z ruchomym słupem sterowane numerycznie (CNC)

Axa VSC-2-MK

Niemcy

1996

używany

na żądanie

INNO32180

Travel X/Y/Z: 740mm/500mm/480mm, tool holder: SK40, tool positions: 22, max. spindle speed: 4700rpm, control: Heidenhain TNC 426 PA. Machine dimensions: approx. 3000mm/2400mm/2700mm, weight: approx. 5000kg. The machine was used exclusively for machining plastic and operated without metalworking fluid. The coolant system must be repaired. The backup battery of the control is depleted and must be replaced. Inspection possible by arrangement.

Pionowe centrum obróbcze CNC

Dmg Gildemeister DMC 635V eco

Niemcy

2010

używany

na żądanie

INNO32109

X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible.

Centrum obróbcze CNC

Deckel Maho DMU 70 eV

Niemcy

2003

używany

na żądanie

INNO32108

A Deckel Maho 5-axis CNC universal machining center is offered, including an Interlit compact filtration system for the coolant supply. 1) Deckel Maho DMU 70 eV 5-axis CNC universal machining center, year of manufacture: 2003, X/Y/Z travels: 750mm/600mm/520mm, B-axis: approx. 180°, C-axis: 360°, rapid traverse X/Y/Z: 50m/min, feed rate: approx. 20m/min, max. spindle speed: approx. 18000rpm, spindle power: approx. 25kW, max. rated power: approx. 35kW, spindle torque: approx. 87Nm, tool holder: SK40, table dimensions X/Y: approx. 700mm/500mm, max. table load: approx. 200kg, tool magazine: 32, weight: approx. 8500kg. 2) Interlit SUK 200-900 compact filtration system, year of manufacture: 2003, filter area: 0.2m², filling volume: 900l. Inspection by prior arrangement is possible.

Centrum obróbcze CNC

Burkhardt + Weber MCR 900

Niemcy

2016

używany

na żądanie

INNO32058

A Burkhardt + Weber heavy-duty CNC large-format machining center is available. Axis travel X/Y/Z: 1600mm/1250mm/1250mm, tool interface: SK50, pallet dimensions X/Y: 800mm/1000mm, 125mm tool pockets: 95, 225mm tool pockets: 7, 350mm tool pockets: 5, 420mm beam tool pockets: 5, coolant system capacity: 1900l, control: Siemens 840D with ShopMill, operating hours: approx. 20000h. Including coolant system with paper band filter, machine enclosure, through-spindle coolant, external coolant nozzles, chip conveyor, dual-gripper tool changer and HV-NC swivel head. Documentation available. An on-site inspection is possible.

Pionowe centrum obróbcze CNC

Hwacheon Sirius-2

Niemcy

2000

używany

na żądanie

INNO32010

Travel X/Y/Z: 560mm/410mm/460mm, Tool positions: 30, Tool interface: CAT40/BT40, Spindle speed: 8000rpm, Spindle power: 10HP, Spindle diameter: 70mm, Rapid traverse: 30m/min, Table dimensions X/Y: 605mm/380mm, Max. table load: 250kg, Number of pallets: 2. Machine dimensions X/Y: approx. 3050mm/2900mm, Weight: approx. 5000kg, Control: Fanuc. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Deckel Maho DMC 103 V

Niemcy

nieznany

używany

na żądanie

INNO31997

A Deckel Maho CNC vertical machining center is available. Travel X/Y/Z: 1000mm/600mm/600mm, table dimensions X/Y: 1200mm/600mm, max. table load: 800kg, spindle speed: 8000rpm, power: 13kW/9kW, torque: 57Nm/83Nm, feed rate: 30m/min, rapid traverse: 30m/min, tool stations: 24, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3200mm/2600mm/2700mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Hurco VMX50/50T

Niemcy

2009

używany

na żądanie

INNO31978

A Hurco CNC vertical machining center is available. Tool holder: SK50, travel X/Y/Z: 1270mm/660mm/610mm, max. table load: 1500kg, spindle speed: 8000rpm, tool stations: 30, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 4600mm/4600mm/3000mm, weight: approx. 9250kg. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Dmg Mori NHX 5000

Niemcy

2017

używany

na żądanie

INNO31944

A DMG MORI CNC 4-axis machining center is available. X/Y/Z-axis travel: 730mm/730mm/880mm, spindle speed: 15000rpm, torque: 250Nm/104Nm, tool interface: HSK-A63, spindle-to-table distance: 80mm-810mm, spindle nose-to-table distance: 70mm-950mm, pallets: 2, pallet dimensions X/Y: 500mm/500mm, max. workpiece weight: 700kg, max. workpiece diameter: 800mm, max. workpiece height: 1000mm, tool positions: 60, rapid traverse: 60m/min, feed rate: 60m/min. Machine dimensions X/Y/Z: approx. 6000mm/4000mm/2700mm, weight: approx. 12000kg, control: Siemens Sinumerik 840D sl, power-on hours: 33184h, operating hours: 10601h. Including 70bar internal coolant supply and Knoll KF 110/700. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Fanuc Robodrill Alpha-T21iF

Niemcy

2008

używany

na żądanie

INNO31942

A Fanuc CNC drilling and machining center is available. Travel X/Y/Z: 700mm/400mm/330mm, distance from table to spindle nose: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, max. spindle speed: 10000rpm, spindle power: 26kW/5.5kW, torque: 35Nm/7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool stations: 21, tool interface: BBT30, positioning accuracy: 0.006mm, repeatability: 0.004mm, machine dimensions X/Y/Z: 2150mm/2050mm/2350mm, weight: approx. 2100kg, control: Fanuc 31i-B5, operating hours: approx. 9547h. Including chip conveyor and coolant tank. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Fanuc Robodrill Alpha-D21LiB5

Niemcy

2021

używany

na żądanie

INNO31941

A Fanuc CNC drilling and machining center is available. Travels X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle speed: 24000rpm, spindle power: 5.5kW, torque: 7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool positions: 21, tool interface: BT30, positioning accuracy: 0.006mm, repeatability: 0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/2200mm, weight: approx. 2500kg, control: Fanuc 31i-B5, power-on hours: 6534h, operating hours: 473h. Documentation available. An on-site inspection is possible.