▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Inne maszyny [1 - 20 of 32]

Pozostałe zapasy

Müller/messer/soprem/felss ExP 10/SOP/FP500K/FR16-V

Niemcy

2002

używany

na żądanie

INNO31158

Various used machines for metal processing are available. 1) Eccentric press Müller ExP 10.SVBA, year of manufacture: 1977, pressing force: 10t, outreach: 160mm, stroke rate: 120/min, ram adjustment: 40mm, stroke adjustment: 72mm, weight: approx. 800kg. 2) 3x decoiler Soprem SOP/20, year of manufacture: 1992/1992/1998, load capacity: 100kg, max. coil outer diameter: 850mm, max. strip width: 100mm, speed: 22rpm. 3) Welding closing system Messer FP500K, year of manufacture: 1977, outreach: 165mm. 4) Feeding machine Felss FR16-V, year of manufacture: 2002, max. tube diameter: 16mm, upsetting shaft speed: 342rpm. On-site inspection is possible.

Pozostałe zapasy

Behringer/löser/knoll HBP-340/SO 0337/PF 70-180

Niemcy

1999

używany

na żądanie

INNO31136

Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible.

Urządzenie obrotowe

Rud 16t

Niemcy

2020

używany

na żądanie

INNO31100

Load capacity: 16000kg, swivel angle: 90°, swivel time: approx. 50s, table dimensions X/Y: 1600mm/1600mm, table support height: 1100mm, machine dimensions X/Y/Z: approx. 2600mm/1800mm/2800mm, weight: approx. 4400kg. An on-site inspection is possible.

Pozostałe zapasy

Graule/flott/quantum ZS 85/BSM 75/B 30 GS

Niemcy

2000

używany

na żądanie

INNO31034

Various smaller workshop metalworking machines from various manufacturers are available. 1) Brush machine RSA STL, year of manufacture: 1979. 2) Belt grinder Flott BSM 75. 3) Pull saw Graule ZS 85, year of manufacture: 1994. 4) Belt grinder Ludwig Gartner AZ2N. 5) Band saw Raim 360, year of manufacture: 1995. 6) Column drilling machine Quantum B 30 GS, year of manufacture: 2005. 7) Belt grinding machine HM TAS 75, year of manufacture: 2000. 8) Assembly band saw Berg & Schmid PBS 148. 9) Pull saw Graule ZS 200 N-S, year of manufacture: 2015. 10) Aluminum circular saw MEP Cobra 350 MA. 11) Notching saw Graule AS 450-D, year of manufacture: 2003. 12) Corner crimping press Rapid HP-205, year of manufacture: 1995. 13) Hydraulic press Schüco. 14) Notching saw Graule AS 450, year of manufacture: 2000. 15) Tie bar punching machine Schüco LA 10, year of manufacture: 2020. An on-site inspection is possible. A package sale of all items is preferred.

Szczypce do zaciskania

Eckold MZD 25/3 PH

Niemcy

2025

używany

na żądanie

INNO30881

A total of 10 mobile Eckold clinching pliers, eight of them originally packaged, are available. Stroke frequency: single stroke, input pressure range: 5bar-16bar, max. operating pressure: 500bar, max. pressing force at 500bar: 30kN, max. joining part thickness: 3mm, reach horizontal/vertical: 25mm/15mm, opening dimension: 6mm, working width: 50mm, machine dimensions X/Y/Z: approx. 260mm/60mm/215mm, weight: approx. 6kg. Including pneumohydraulic pressure intensifier and tail insert. Documentation available. An on-site inspection is possible.

System automatyki magazynu okrągłego

Dmg Automation PH150-7

Niemcy

2011

używany

na żądanie

INNO30689

An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible.

Magazyn do podajnika barów

Fmb Turbo 8-80/3200-A

Niemcy

2012

używany

na żądanie

INNO30592

An FMB bar feeder including a bundle loader is available. Bar diameter range: 8mm-80mm, max. bar length: 3200mm, feed speed: 1000mm/s, return speed: 1400mm/s, max. remnant length: 580mm. Machine dimensions X/Y: approx. 4700mm/1500mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.

Magazyn do podajnika barów

Fmb 5-55/3200-A

Niemcy

2008

używany

na żądanie

INNO30578

Bar length range: 500mm-3200mm, conversion kit: D50/1650/3200, max. bar diameter: 50mm, material guide: 30mm, max. feed force: 750N, max. gripping force: 1500N, insertion speed: 700mm/s, return speed: 1000mm/s, loading capacity: 240mm. Machine dimensions X/Y: approx. 4450mm/900mm, weight: approx. 1800kg. An on-site inspection is possible.

Gramofon

Froriep 40 TDV 320

Niemcy

1962

używany

na żądanie

INNO30556

A heavy-duty rotary table is offered that was completely overhauled in 2024. Control cabinet: new, motors/components: new, table size X/Y: 3200mm/3200mm, max. table load: 40000kg. Travel distance table slide: 1750mm. Control: Siemens, measuring systems: Heidenhain, control cabinet in transport fixture, regularly maintained, documentation: original plans, wiring diagrams 2024, terminal plan, operating manual, machine weight: approx. 30000kg. Inspection is possible by arrangement.

Linia do obróbki kół zębatych

Emag VLC100/VLC200/Trackmotion

Niemcy

2015

używany

na żądanie

INNO30456

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible with power connection.

Metalowa drukarka 3D

Nikon Slm Solutions SLM280 2.0 Single 700W

Niemcy

2022

używany

na żądanie

INNO30386

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement.

Magazyn do podajnika barów

Irco Profimat 65.8R-270.8/RBK 10016

Niemcy

2008

używany

na żądanie

INNO30273

Two larger bar feeders with drum magazines and one smaller unit are available. 1) Kurt Breuning (IRCO) Profimat 65.8R/270.8, year of construction: 2008, guide channels: 8, max. material diameter: 65mm, max. bar length: 3200mm. 2) Kurt Breuning (IRCO) Profimat 65.8R/270.8, year of construction: 2008, guide channels: 8, max. material diameter: 65mm, max. bar length: 3200mm. 3) Kurt Breuning (IRCO) ILS RBK 10016, year of construction: 2005, max. material diameter: 100mm, max. bar length: 1600mm, height adjustment: approx. 250mm. Machine dimensions X/Y/Z: approx. 2350mm/1000mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Individual sale possible.

Giętarka do taśmy stalowej

Mbe ZB-Rahmen SE 250

Niemcy

2008

używany

na żądanie

INNO30268

A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible.

Podajnik baru

Fmb MINIMAG/4200/A

Niemcy

2002

używany

na żądanie

INNO30114

A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.

Drukarka metalu 3D

Markforged/lömi Metal X/Sinter II

Niemcy

2021

używany

na żądanie

INNO30016

A complete 3D metal printing system is available. 1) 3x 3D metal printers Markforged Metal X, year of manufacture: 2021, printing process: Metal FFF, build volume X/Y/Z: 300mm/220mm/180mm, materials: 17-4PH/H13/A2/D2/Inconel 625/Cu, max. part dimensions X/Y/Z: 250mm/183mm/150mm, max. part weight: 10kg, layer height after sintering: 50µm/125µm, machine dimensions X/Y/Z: approx. 600mm/500mm/1150mm, operating hours: approx. 3300h. 2) Sintering furnace Markforged Sinter 2, year of manufacture: 2021, solvent volume: 18356cm³, max. temperature: 1300°C, washing duration: 17h-31h, machine dimensions X/Y/Z: approx. 1200mm/700mm/1500mm, weight: approx. 350kg. 3) Solvent washing table system LÖMI EDA30 M3D, year of manufacture: 2021, batch volume: 16L, max. operating temperature: 120°C, batch chamber dimensions X/Y/Z: 200mm/216mm/380mm, machine dimensions X/Y/Z: approx. 550mm/800mm/1000mm. Including two additional FDM printing systems Markforged Onyx One and MarkTwo. Documentation available. An on-site inspection is possible.

Pozostałe zapasy

Eisele/magnetor VMS/PS50R

Niemcy

1973

używany

na żądanie

INNO29979

Various metalworking machines and peripheral equipment are available. 1) 2x B-axes. 2) 2x flat gear motors FH77DER. 3) 3x helical gear brake motors R87DRS132S4BE11. 4) Flat gear motor FH77GDRS. 5) Variable displacement axial piston pump. 6) 2x Eisele saws with roller conveyor. 7) Drilling machine. 8) 2x pallet trucks. Some of the machines are defective. An on-site inspection is possible.

Linia montażowa

Anger

Niemcy

2019

używany

na żądanie

INNO29864

A complete automation system for handling machining center products is available. 1) Full protection cabin with safety door. 2) 6-axis robot Kuka KR 120 R 3200 PA with gripper adapter. 3) 6-axis robot Kuka KR 120 R 3500 with gripper adapter. 4) 2x 6-axis robots Kuka KR 10 R 1420 with gripper. 5) Handling unit with 2 robots. 6) Reference chamber. 7) Marking station with extraction, cleaning station, and assembly unit for 2 lanes. 8) 2x adhesive application stations. 9) 2x screwing stations. 10) Drawer system with part inserts. 11) Pallet storage area. The transfer stations and removal/handling grippers are designed for specific parts. Documentation available. An on-site inspection is possible.

Drukarka metalu 3D

Concept Laser M2-cusing

Niemcy

2007

używany

na żądanie

INNO29460

A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible.

Magazyn do podajnika barów

Breuning Irco ILS RBK 10012

Niemcy

2005

używany

na żądanie

INNO29385

Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible.

Pozostałe zapasy

Bbm/nimak/weiler/ksm/tox

Niemcy

1995

używany

na żądanie

INNO29297

Various metalworking machines are available. 1) Larger BBM guillotine shears, year of manufacture: 1995. 2) Nimak spot welding machine, year of manufacture: 1990s. 3) Roundel machine Schwartmanns, year of manufacture: 1987. 4) Smaller lathe Weiler, year of manufacture: 1966. 5) Table-top stud welder Soyer, year of manufacture: 2000s. 6) Freestanding grinding motor. 7) KSM deburring machine, year of manufacture: 1980s. 8) Larger Tox hydraulic stamping press, year of manufacture: 1990. 9) TES 15 hydraulic press, year of manufacture: 1972. 10) Single-column table press, year of manufacture: 1955. 11) Landert honing machine. On-site inspection is possible.