▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Piece [1 - 20 of 36]

Piec komorowy

Elektro-höhn Gmbh MHV-3500

Niemcy

2005

używany

na żądanie

INNO31790

The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible.

Piec retortowy

Pfs Anlagenbau Retortenofen

Niemcy

nieznany

używany

na żądanie

INNO31394

A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible.

Piec do suszenia

Neitz M265

Niemcy

1974

używany

na żądanie

INNO31351

An industrial drying oven Biagosch & Brandau, which has been overhauled by Neitz, is available. Fuel: natural gas, calorific value: 7600kcal/Nm³, gas pressure: 200mm/Ws, fuel consumption: 2.75Nm³/h, operating temperature: 120°C, heating capacity: approx. 23.3kW/20000kcal/h. An on-site inspection is possible.

Piec komorowy

Rohde KE 600 EW

Niemcy

nieznany

używany

na żądanie

INNO31040

A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

Piec do suszenia

Horo 2736 AL-BGL

Niemcy

2013

używany

na żądanie

INNO30961

A heating and drying oven Horo is available. Connected load: 12.5kW. Max. temperature: 120°C. Heating power: 12kW. Volume: 2736l. Documentation available. An on-site inspection is possible.

Piec komorowy

Keller Ihne Tesch TRUS/TRH

Niemcy

2005

używany

na żądanie

INNO30863

Industrial drying oven / heating oven: Maximum operating temperature: 160°C, power: 20.6kW, double-door model, recirculating air / fresh air system, digital PID temperature controller, digital timer / process control, digital recording device / chart recorder (TE Direct), internal dimensions (W x H x D): approx. 1000mm x 1500mm x 800mm (approx. 1200l volume), external dimensions (W x H x D): approx. 1600mm x 2100mm x 1200mm, total weight: 580kg. Inspection possible by arrangement.

Piec komorowy z cyrkulacją

Padeltherm KEU 4063/400

Niemcy

2005

używany

na żądanie

INNO30742

Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible.

Piec komorowy

Energo KSF 500

Niemcy

1992

używany

na żądanie

INNO30714

Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible.

Piec z obiegiem powietrza

Nabertherm N500/45A

Niemcy

2001

używany

na żądanie

INNO30405

Max. operating temperature: 450°C, number of fans: 1, fan power: 0.75kW, power loss: 8kW, voltage: 400V, phases: 3, frequency: 50Hz, power supply: 26/26/32A, connected load: 18kW, control panel: Program Controller C40. With full documentation. The oven is in good condition, has been inspected regularly, and was in operation until recently. An on-site inspection is possible.

Piec z obiegiem powietrza

Nabertherm N500/65HA

Niemcy

2015

używany

na żądanie

INNO30162

A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible.

Piec komorowy

Niemcy

nieznany

używany

na żądanie

INNO30126

A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible.

Piec indukcyjny

Itg ITPA 50K200+10K100

Niemcy

2006

używany

na żądanie

INNO29632

An induction system ITG for heat treatment of workpieces with vertical chain lift system is available. Process: heating/hardening, number of inductors: 2, inductor type: copper coil, cooling: water cooling, connected load: 382kVA, rated current: 552A. Documentation available. An on-site inspection is possible.

Piec piecowy

Nabertherm W 1000/A

Niemcy

1999

używany

na żądanie

INNO29630

Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025.

Piec przelotowy.

Löcher

Niemcy

2007

używany

na żądanie

INNO29189

A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible.

Piec hartowniczy

Stahlmann Schienen-Härteofen

Niemcy

2018

używany

na żądanie

INNO29065

A rail hardening furnace for the production of shears is available. Working length: 3400mm, heating zones: 2, heating power: 34kW, useful space separation: SiC plates, temperature-controlled zones: 2, conveying direction: free, machine dimensions X/Y/Z: approx. 4000mm/1250mm/2100mm. Including automatic conveyor system and separate blower. Documentation available. On-site inspection is possible.

Piec suszarniczy

Gullco 350

Niemcy

2003

używany

na żądanie

INNO28812

Three identical Gullco electrode ovens are available for drying and stabilizing welding electrodes. Internal dimensions X/Y/Z: approx. 350mm/400mm/480mm, max. electrode length: 450mm, max. temperature: 550°C, power consumption: 1.5kW, machine dimensions X/Y/Z: approx. 560mm/560mm/620mm, weight: approx. 160kg. Documentation available. On-site inspection is possible.

Piec topiący

Rauch ZSO 700 B

Niemcy

1995

używany

na żądanie

INNO28768

A smoke melting system is available. Components: Furnace, conveyor belt, electric stacker, melting container, ingot casting belt. Total plant dimensions X/Y/Z: approx. 6000mm/3500mm/3800mm, total plant weight: approx. 4500kg. Documentation available. On-site inspection is possible.

Piec do wyżarzania

Herdieckerhoff STE 300/1000

Niemcy

1986

używany

na żądanie

INNO28576

A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible.

Piec przelotowy.

Kohnle TE 1000-100/60-1000

Niemcy

2023

używany

na żądanie

INNO28495

A Kohnle conveyor belt oven is available. Heating length: 1000mm, max. operating temperature: 1120°C, cooling length: 1850mm, throughput speed: 100mm-1000mm/min, channel height: 40mm, conveyor belt width: 110mm, machine dimensions X/Y/Z: approx. 5000mm/650mm/1350mm, control: Simatic HMI. Including ammonia splitter, data logger, nitrogen curtain at the front and rear and an additional pot conveyor. Documentation available. On-site inspection is possible. Expected to be available from March 2025.

Piec hartowniczy

Nabertherm Multitherm N7

Niemcy

1996

używany

na żądanie

INNO28108

Volume: 7l, power: 3kW, max. temperature: 1100°C, internal dimensions X/Y/Z: 230mm/250mm/120mm, external dimensions X/Y/Z: approx. 460mm/690mm/460mm, weight: approx. 65kg. Documentation available. On-site inspection is possible.