▷ Używane maszyny do przetwarzania żywności z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Maszyny do przetwarzania żywności, napojów [1 - 20 of 152]

Pasteryzator przepływowy

Pietribiasi Michelangelo Srl

Niemcy

2022

używany

na żądanie

INNO30859

An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible.

Linia do produkcji makaronu

Axor P-145 C-400

Niemcy

nieznany

używany

na żądanie

INNO30813

A complete Axor pasta production line for short goods and nest goods Nidi with integrated pressing, cutting, drying and cooling line is available. Thermal output: 320000kcal/h, electrical power: 145kW, press cooling thermal energy: 25000kcal/h, pasta cooling thermal energy: 50000kcal/h. Number of dosing units: 2, dosing type: semolina dosing, press type: P-145 C-400, number of screws: 2, screw diameter: 145mm, drying tunnel dimensions X/Y: 2000mm/1500mm, total number of pasta frames: 550, pasta frame dimensions X/Y: 2000mm/1500mm, circulating frames: 440. Documentation available. An on-site inspection is possible. This is a complete pasta production line for nest goods, however longer pasta products can also be produced.

Maszyna odcinająca skórę

Maja BXA 434/BXM 43 Loin/BFE 1-K

Niemcy

2008

używany

na żądanie

INNO30809

A complete Maja derinding line for chops with defatting machine, derinding machine and photo detection is available. 1) Derinding machine Maja BXA 434, year of manufacture: 2008, cutting width: 434mm, infeed depth: 385mm, clearance and belt width: 443mm, machine dimensions X/Y/Z: approx. 1950mm/1000mm/1250mm, weight: approx. 350kg. 2) Defatting machine Maja BXM 434 Loin, year of manufacture: 2010, max. feed speed: 25m/min, machine dimensions X/Y/Z: approx. 1000mm/900mm/1250mm, weight: approx. 375kg. 3) Fat-lean analysis system Maja BFE 1-K, year of manufacture: 2010. Documentation available. An on-site inspection is possible.

Autoklaw

Stock Dft DAX 1400-2 BV-VA-WT

Niemcy

2020

używany

na żądanie

INNO30774

An autoclave Stock DFT including a Jumag steam system for the food industry is available. Batch trolley capacity: 2, process method: steam-water spraying, application: sterilization/pasteurization, gross volume: approx. 1550l, steam system: Jumag DG560, steam output: approx. 560kg/h. Including 6 batch trolleys. Documentation available. An on-site inspection is possible.

Zbiornik fermentacyjny

Speidel

Niemcy

nieznany

używany

na żądanie

INNO30744

Three stainless steel tanks Speidel, equipped as fermentation tanks, are available. Volume: 330l, level indicator: available. An on-site inspection is possible.

Zbiornik fermentacyjny

Speidel

Niemcy

nieznany

używany

na żądanie

INNO30743

Three stainless steel tanks Speidel, equipped as fermentation tanks, are available. Volume: 1000l, level indicator: available. An on-site inspection is possible.

Wtryskiwacz

Lutetia ISMP

Niemcy

nieznany

używany

na żądanie

INNO30730

A needle injector (brine injector) Lutetia for the meat processing industry is available. Injection rate range: 5%-100%, conveyor belt width: 400mm, belt length: 1500mm, number of needles: 75, feed rate: 22.5mm/s, working dimensions X/Y: 400mm/250mm, machine dimensions X/Y/Z: approx. 2200mm/1100mm/1900mm, weight: approx. 500kg. An on-site inspection is possible.

Maszyna do napełniania kiełbas

Townsend NL-17 Flexline

Niemcy

2008

używany

na żądanie

INNO30729

A horizontal high-speed sausage linker Townsend (TECO) (filling, linking, hanging) for cellulose and collagen casings is available. Casing caliber (before cooking): 14.5mm-34mm, max. casing segment length: approx. 430mm, max. production capacity: 2750kg/h, total system dimensions X/Y/Z: approx. 5800mm/1850mm/1300mm, weight: approx. 900kg. On-site inspection is possible.

Nożyk do cięcia szyb

Weber CCS 602

Niemcy

nieznany

używany

na żądanie

INNO30728

A high-performance slicer and portioner Weber including scale, knife sharpener and a conveyor belt is available. Knife type: circular knife, knife diameter: 460mm, slicing thickness range: 0.1mm-50mm, design: 1200mm, machine dimensions X/Y/Z: approx. 2500mm/1200mm/2200mm, weight: approx. 1500kg. An on-site inspection is possible.

Separator

Baader 601-520

Niemcy

2008

używany

na żądanie

INNO30726

A Baader refiner for the separation of soft and solid components is available. Throughput capacity: approx. 800kg/h, connected load: 3kW, drum hole diameter: 1mm, machine dimensions X/Y/Z: approx. 1100mm/900mm/1300mm, weight: approx. 450kg. An on-site inspection is possible.

Klipsownica do kiełbasy

Alpina SP 15/12

Niemcy

nieznany

używany

na żądanie

INNO30725

An automatic double clip machine (casing clipper) Alpina/Tipper Tie for single, chain and ring products is available. Caliber range: 20mm-80mm, clipping capacity: 200/min, clip system: double clip, pitch: 12mm/15mm, machine dimensions X/Y/Z: approx. 1600mm/1150mm/2000mm, weight: approx. 500kg. An on-site inspection is possible.

Klipsownica do kiełbasy

Tecno Brianza Brevetti TBA 800

Niemcy

nieznany

używany

na żądanie

INNO30724

A manual clipping machine Tecno Brianza Brevetti Clippatrice H2 is available. Products: sausage products, casing types: natural casings/artificial casings/synthetic casings, clipping capacity: approx. 600pieces/h, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1750mm, weight: approx. 100kg. On-site inspection is possible.

Porcjoner mięsa

Risco RS 912

Niemcy

nieznany

używany

na żądanie

INNO30723

A minced meat and portioning system Risco is available. Portioning capacity: 60/min, accuracy: +/-1%, max. portion dimensions X/Y/Z: 300mm/190mm/75mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1700mm, weight: approx. 610kg. On-site inspection is possible.

Tenderizer

Metalquimia Filogrind

Niemcy

2006

używany

na żądanie

INNO30722

An automatic meat tenderizer roller tenderizer Metalquimia is available. Design: needle-/roller, theoretical throughput capacity: approx. 8500kg/h, machine dimensions X/Y/Z: approx. 2000mm/1300mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible.

Krajalnica do kostek i pasków

Treif Felix 100 CE

Niemcy

2010

używany

na żądanie

INNO30721

A Treif dicing and strip cutter for meat is available. Rated throughput capacity: approx. 800kg/h, cutting length range: 0.5mm-32mm, cutting chamber dimensions X/Y/Z: 96mm/96mm/30mm, grid set range: 4mm-96mm, machine dimensions X/Y/Z: approx. 1000mm/800mm/1000mm, weight: approx. 200kg. On-site inspection is possible.

Prasa do mięsa

Hoegger SP 280

Niemcy

2008

używany

na żądanie

INNO30720

A bacon or meat forming press Hoegger is available. Cycle rate: approx. 5/min, max. product dimensions X/Y/Z: 720mm/280mm/120mm, operating pressure: 8bar. Machine dimensions X/Y/Z: approx. 2600mm/900mm/2000mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.

Nożyk do cięcia szyb

Magurit Starcutter 344

Niemcy

2010

używany

na żądanie

INNO30719

Products (frozen): meat/fish/food, max. product block dimensions X/Y/Z: 250mm/420mm/650mm, slicing thickness range: 14mm-20mm, max. throughput capacity: approx. 4000kg/h, working height: 925mm. Documentation available. An on-site inspection is possible.

Wykrywacz metali

Pulsotronic M-Pulse2 INLine 100 (EX)

Niemcy

2019

używany

na żądanie

INNO30712

A Pulsotronic metal detector for liquid and pasty products in pipeline systems is available. Pipe diameter: 100mm, max. operating pressure: 10bar, max. operating temperature: 80°C, version: EX. Machine dimensions X/Y/Z: 1250mm/550mm/700mm, weight: approx. 50kg. On site inspection is possible.

Przesiewacz

Dinnissen CZ-6

Niemcy

2020

używany

na żądanie

INNO30691

A Dinnissen centrifugal screening machine for classifying screening of bulk materials is available. Screening area: 2.2m², screen basket division: 5, inlet height: 900mm, screen basket fineness: 250µm, min. screening chamber operating pressure: 0.5bar. Machine dimensions X/Y/Z: approx. 2200mm/1050mm/1650mm, weight: approx. 1050kg. Without control cabinet. Documentation available. An on site inspection is possible. Image is an example.

Separator

Gea HSB 300-06-777

Niemcy

2003

używany

na żądanie

INNO30690

A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible.