Maszyny Uzywane Niemcy - Innovac GmbH

Automat do wiercenia

Wmw BK63

Niemcy

1960

używany

na żądanie

INNO26824

Projection: 315mm, spindle speeds min.-max.: 9 steps, 63rpm-1000rpm, worktable size: 500mm/400mm, dimensions X/Y/Z: 2300mm/1000mm/700mm, weight: 1000kg. Feed defective.

więcej

Maszyna nawijająca

Blume Und Redecker AM 100

Niemcy

nieznany

używany

na żądanie

INNO26823

Max. wire diameter: 3.75mm, max. spool diameter: 340mm, max. spool length: 600mm, max. speed: 2700rpm, tip height: 150mm.

więcej

Bobiniarka rolowa

Saval PTP 505

Niemcy

nieznany

używany

na żądanie

INNO26828

Working width: 1600mm, max. thickness for knife cut/circular cut: 20mm/10mm, number of blades: 4.

więcej

Szlifierka

Wmw SU 315x2000

Niemcy

nieznany

używany

na żądanie

INNO26825

Grinding diameter: 315mm, grinding length: 2500mm, center height: 165mm, speed: 500rpm (10 steps), spindle bore diameter/taper: 30mm/MK4, grinding wheel diameter: max. 500mm, table size: 3500mm/310mm, table tilt: approx. 4.8°, longitudinal feed of the table: 5-2680mm, feed: 50-4000mm/rev. Weight: approx. 7400kg, Dimensions X/Y/Z: 6500mm/1700mm/2000mm. Headstock defective, can be repaired.

więcej

Szlifierka do powierzchni profili

Elb Schliff Optimal 6375 SPS-NK

Niemcy

1996

używany

na żądanie

INNO26822

Grinding length: 600mm, grinding width: 375mm, workpiece height: 375mm, magnetic table dimensions X/Y: 600mm/400mm, grinding wheel dimensions: 300mm/50mm, max. table speed: 30m/min, grinding wheel speed: 1450rpm, weight: approx. 3500kg, dimensions X/Y/Z: 2800mm/2500mm&2500mm. Guideway run-in, no oil pockets, magnet failure X and Y axes 0.01mm and 0.02mm respectively. Machine in good working order. Documentation available.

więcej

Obsługa robotów

Arburg Multilift H m. B-Achse

Niemcy

2019

używany

na żądanie

INNO26826

Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available.

więcej

Przewijarka bobinowa

Pasquato TR 15/450

Niemcy

2002

używany

na żądanie

INNO26827

Working width: 1500mm, max. master roll diameter: 450mm, max. master roll weight: 400kg, max. end roll diameter: 450mm, max. end roll weight: 90kg/shaft, min. slitting width: 10mm, winding speed: 100m/min.

więcej

Maszyna do piaskowania

Peenmatic 1800 SDK

Niemcy

2000

używany

na żądanie

INNO26817

Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available.

więcej

Wiertarko-frezarka

Hille/raboma/shw UE 21/SKM/BG 80

Niemcy

1959

używany

na żądanie

INNO26815

There are 3 old used machines without documentation available. 1x multi-spindle drilling machine Hille type: BG 80, year of manufacture: 1959. 1x NC milling machine SHW type: UE 21. 1x radial drilling machine Raboma type: SKM. All machines in working order. On-site inspection is possible.

więcej

5-osiowe centrum obróbcze CNC

Emmegi Phantomatic T5

Niemcy

2006

używany

na żądanie

INNO26818

Travel X/Y/Z/P/H: 7000mm/300mm/350mm/3500mm/3500mm, rapid traverse X/Y/Z/P/H: 56/22.5/22.5/45/45 m/min. Acceleration X/Y/Z/P/H: 4.68/1.84/1.84/3.75/3.75 m/s². Tool positions: 2x (5+1) positions, max. diameter of milling tool/threading tool/saw blade: 50mm/M10 continuous, wall thickness 5mm/180mm, max. angle head width with 2 holders: 239mm. Speed: 18000rpm, tool holder: ISO30, air consumption: 175Nl/min, max. workpiece dimensions with vertical tools: 165mm/200mm/6650mm, weight: 3100kg. Documentation available.

więcej

Sprężarka śrubowa

Kaeser SK19

Niemcy

1997

używany

na żądanie

INNO26819

Power: 11kW, Voltage: 230/460Volt, 3-Phase, max. Operating Pressure: 10bar, Flow Rate: 1.5m³/min, max. Flow Rate: 1.92m³/min (68 CFM), Flow Rate at Max. Pressure: 1.27 m³/min (45CFM). Dimensions (Length/Width/Height): 812,8mm/762mm/1041,4mm

więcej

Nawijarka foliowa

Cyklop GL110/11

Niemcy

nieznany

używany

na żądanie

INNO26808

Diameter of the winding plate: 1500mm, height of the machine: 2500mm. Documentation available.

więcej

Mieszacz próżniowy

Mainali Amasadora AV-50

Niemcy

nieznany

używany

na żądanie

INNO26806

Capacity: 50l, machine dimensions: Length: 880mm, Width: 680mm, Height with flap closed/open: 1030mm/1350mm. On-site inspection is possible.

więcej

Maszyna do kontroli puszek

Industrial Physics Eagle Vision 360°

Niemcy

2014

używany

na żądanie

INNO26807

Max. output: 108000 cans/hour, accuracy: defect detection approx. 2x2mm-3x3mm, reliability of detection: up to 99.9%, error rate: under 0.1%, weight: 500kg, dimensions X/Y/Z: 1300mm/1400mm/1565mm. Documentation available. For more detailed data, an on-site inspection is possible.

więcej

Ploter

Hp Designjet T520 ePrinter

Niemcy

2014

używany

na żądanie

INNO26809

Number of print cartridges: 4 (cyan, magenta, yellow, black), ink types: Dye-based (C, M, Y) and pigment-based (K), print quality max: 2400 x 1200 optimized dpi, minimum line width: 0.07mm, line precision: ±0.1%, max optical density (black): 8 L* min/2.10D. Documentation available.

więcej

Hydrauliczna prasa krawędziowa

Gwf H 100-2

Niemcy

1992

używany

na żądanie

INNO26811

Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm.

więcej

Prasa śrubowa

Gwf DFN 100

Niemcy

1992

używany

na żądanie

INNO26810

Compressive force: 1000kN/100t, lifting speed: 25/min, ram stroke: 230mm, power requirement: 5.5kW, safety distance: 640mm, stopping time: 400ms, weight: 4600kg. Has been overhauled once.

więcej

Prasa

Chappuis P.A.U. 2x20T

Niemcy

1965

używany

na żądanie

INNO26814

Power of parallel/offset crankshaft: 30t/2x20t, stroke: 50mm, clamping surface: 230mm/460mm, face of tappets: 2x 30mm/110mm, average of clamping journals: 38mm. Max./min. Opening front dead center: 240mm/180mm, ejection distance: 24mm. Max./min. Band width: 80(100)mm/10(5)mm, max. feed: 120mm. Running speed: 60-180rpm, drive pulley diameter: 180mm, gear reduction: 1:4, documentation available.

więcej

Szlifierki do wałków CNC

Studer S36 CNC

Niemcy

2006

używany

na żądanie

INNO26812

Number of axes: 3, center height: 175mm, distance between centers: 1000mm, grinding length: 500mm, strokes X/Z: 267mm/650mm. Continuous orientation: +/-8.5°, Outer grinding wheel dimensions X/Y/Z: 500mm/80mm/203mm. Cutting speed: 44m/s, taper type: CM5, C-axis: +/-0.5°, speed: 1000rpm. Tailstock: taper type: CM3, quill stroke: 35mm, quill diameter: 50mm, max. piece weight between centers: 130kg. Dimensions X/Y/Z: 2700mm/2350mm/2100mm, weight: 4000kg, operating hours: approx. 28000h. Tailstock (hydraulic clamping cylinder and clamping spring) recently overhauled. Documentation available.

więcej

Maszyna do formowania, wypełniania i uszczelniania

Affeldt E350

Niemcy

2014

używany

na żądanie

INNO26805

Seven tubular bag machines from Affeldt are available: Two E350 DV models (built in 1999 and 2004 with around 3 million packs and 192,460 operating hours), three AVN E350 D models (built in 1999, 2014 and 2014 with 3.7 million packs and operating hours of 14,405 and 16,305 respectively) and two AVN E350 DN models (built in 2001 and 2002 with around 5.2 million packs). The machines produce approx. 22 packs of 2.5 kg per minute. They are offered without printers and labelers. Individual sale of the machines is possible.

więcej

Niezawodny partner u Państwa boku w zakresie używanych maszyn z Niemiec