Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1 - 20 of 2481]

Maszyna termoformująca

Adolf Illig RDM 37

Niemcy

1965

używany

na żądanie

INNO29163

Form dimensions X/Y: 475mm/250mm, max. material width: 495mm, max. infeed length: 280mm, max. negative draw depth: 100mm, max. roll diameter: 1200mm, max. material thickness: 2.3mm, max. cycle output: 48 cycles/min, forming output: approx. 6500 cups/min, machine dimensions X/Y/Z: approx. 5500mm/2200mm/2100mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Maszyna do pakowania w skórki i blistry

Adolf Illig SB 53 b-1

Niemcy

1978

używany

na żądanie

INNO29162

Two Illig skin and blister packaging machines are available. Form dimensions X/Y: 350mm/500mm, clamping frame dimensions X/Y: approx. 400mm/540mm, max. drawing depth: 200mm, heating capacity: 4.7kW. Documentation available. On-site inspection is possible.

Zespół maszyn do termoformowania

Adolf Illig RDKP 54

Niemcy

1975

używany

na żądanie

INNO29161

An Illig thermoforming machine is available. Form dimensions X/Y: 500mm/380mm, max. film width: 540mm, draw depth range: -120mm/+120mm, max. feed length: 360mm, cycle rate: 30 cycles/min, punching area X/Y: 500mm/390mm, punching force: 50000daN, machine dimensions X/Y/Z: approx. 4500mm/2200mm/2200mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

Maszyna termoformująca

Adolf Illig UA 100 EDH

Niemcy

1971

używany

na żądanie

INNO29160

A universal Illig double-stroke thermoforming machine is available. Form dimensions X/Y: 960mm/560mm, max. drawing depth: 280mm, max. panel dimensions X/Y: 960mm/560mm, motor power: 1.5kW, heating power: 16.3kW, heating zones: top and bottom. On-site inspection is possible.

Maszyna wykrawająca

Illig ZSM 90

Niemcy

1976

używany

na żądanie

INNO29159

Three Illig punching machines are available for the precise punching of thermoformed plastic parts from film material. Working width: approx. 900mm, working height: approx. 120mm, roller diameter: approx. 196mm, machine dimensions X/Y/Z: approx. 2500mm/1300mm/1600mm, weight: approx. 750kg. Including two hydraulic punching machines Wolf EHPT 6E and two manual swivel arm punching machines. On-site inspection is possible.

Młyn młotkowy

Rematec RPM 650/K20.0

Niemcy

2020

używany

na żądanie

INNO29158

A Rematec hammer mill as good as new is available. Engine type: AlphaOne OMT-1-280M4, engine power: 108kW, engine speed: 1785rpm. Documentation available. On-site inspection is possible.

Maszyna do termoformowania próżniowego

Geiss T8 DU

Niemcy

2008

używany

na żądanie

INNO29157

A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible.

Frezarka CNC

Geiss ECO FZ

Niemcy

2008

używany

na żądanie

INNO29156

A 5-axis CNC milling machine Geiss with full encapsulation is available. Travel X/Y/Z: 2500mm/2200mm/760mm, tool holder: ER25, spindle power: 11kW, milling head type: orthogonal milling head, control: Siemens Sinumerik 840 Di solution line. Documentation available. On-site inspection is possible.

Sprężarka

Atlas Copco GA30VSD+FF

Niemcy

2014

używany

na żądanie

INNO29155

Two identical Atlas Copco compressors are available. Volume flow: 5.87m³/min, power requirement: 39.66kW, speed: 7300rpm, oil capacity: 20l, operating hours: approx. 50000h. Documentation available. On-site inspection is possible.

Tokarka CNC

Gildemeister MDW 33 x 2000

Niemcy

1981

używany

na żądanie

INNO29154

An older CNC lathe Gildemeister is available. Turning diameter: 650mm, turning length: 2000mm, control: Siemens EPM, operating hours: 73347h. Including one steady rest and one tailstock. The steady rest has a crack. Documentation available. On-site inspection is possible.

Wycinarka do ciasta

New Dell TFL 610

Niemcy

2025

używany

na żądanie

INNO29153

A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.

Maszyna CNC do obróbki szkła

Mdi MP500-CE

Niemcy

2009

używany

na żądanie

INNO29151

A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.

Parowar do mleka odtłuszczonego

Msr

Niemcy

1967

używany

na żądanie

INNO29150

A plant for the production of skimmed milk is available. Production capacity: 15000l/h, evaporation ratio: 65%, connected load: 90kW, control: Siemens S7, control year: 2006, including a cooling tower from 2020, documentation available. On-site inspection is possible.

Szlifierki do wałków CNC

Rollomatic RPG

Niemcy

2015

używany

na żądanie

INNO29149

A hydraulically operated Rollomatic precision plunge-cut grinding machine is available. Grinding process: cylindrical plunge grinding, workpiece diameter range: 0.2mm-6.35mm, shank diameter range: 1mm-6.35mm, total workpiece length range: 30mm-60mm, grinding wheel diameter: 200mm, grinding spindle speed: 6000rpm, workpiece speed: 800rpm. Machine dimensions X/Y/Z: approx. 1100mm/800mm/1300mm, weight: approx. 600kg. The machine has only processed about 1500 workpieces. Documentation available. On-site inspection is possible.

Prasa wielostopniowa

Nedschroef BS 3

Niemcy

1976

używany

na żądanie

INNO29148

Wire diameter range: 6-10mm, dies: 4, steps: 7, cut-off length: 75mm, underhead shank length: 50mm, max. width across flats: 17mm, max. thread length: 50mm, production capacity: 285 pieces/min, pressing force: 110t. Documentation available. An on-site inspection is possible.

Prasa wielostopniowa

Hatebur BKA 2

Niemcy

1990

używany

na żądanie

INNO29147

A Hatebur cold former for wire processing is available. Wire diameter range: 6mm-14mm, dies: 4, steps: 5, cutting length: 125mm, underhead shank length: 15mm-102mm, max. width across flats: 17mm, production speed: 120 pieces/min, pressing force: 100t, machine weight: approx. 12000kg. An on-site inspection is possible.

Przenośnik taśmowy

Niemcy

nieznany

używany

na żądanie

INNO29146

A waterproof trough conveyor belt, therefore well suited for wet goods such as a food washing system (vegetables/fruit), is available. Material: stainless steel, belt width: 370mm, trough width: 400mm, trough height: 150mm, total length: 12300mm, total width range: 500mm-600mm. Without motor. Documentation available. On-site inspection is possible.

Przenośnik taśmowy

Stöber K21R 90 S4 TLB 960

Niemcy

nieznany

używany

na żądanie

INNO29145

An Intralox belt, buffer table and Stöber conveyor belt are available. Belt width: approx. 1150mm, belt length: approx. 4900mm, frame material: stainless steel. Including 4 belts. Documentation available.

Rama napinająca

Brückner

Niemcy

1986

używany

na żądanie

INNO29144

A Brückner stenter frame, perfectly suited as a spare parts dispenser, is available. Steam pressure: 2 bar, air pressure: 10 bar. On-site inspection is possible.

Maszyna do formowania wtryskowego

Boy 22 SVV dipronic

Niemcy

1987

używany

na żądanie

INNO29143

A small Boy injection molding machine is available. Clamping force: 220kN, tie bar dimensions X/Y: 254mm/254mm, max. platen distance: 400mm, min. installation height: 200mm, opening stroke: 200mm, ejector stroke: 80mm. Screw diameter: 24mm, injection volume: 36cm³, injection weight: 32g, injection pressure: 1455bar. Machine dimensions X/Y/Z: 1800mm/1000mm/2600mm, weight: approx. 750kg, control: Dipronic. On-site inspection is possible.