Pionowa maszyna do formowania wtryskowego

Arburg SELECTA 1200T 800-150

Niemcy

2002

używany

na żądanie

INNO27826

Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.

więcej

Maszyna do formowania wtryskowego

Krauss Maffei KM 250-1400 C1

Niemcy

2002

używany

na żądanie

INNO27744

Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available.

więcej

Maszyna do formowania wtryskowego

Krauss Maffei 420/110/650/850

Niemcy

2016

używany

na żądanie

INNO27684

A total of 8 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible.

więcej

Maszyna do formowania wtryskowego

Krauss Maffei 160-750 CX

Niemcy

2005

używany

na żądanie

INNO27501

Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible.

więcej

Maszyna do formowania wtryskowego

Battenfeld BA 500 CD

Niemcy

1987

używany

na żądanie

INNO27430

Clamping force: 500kN, tie-bar spacing: 304mm/304mm, platen size X/Y/: 480mm/480mm, min. mold height: 150mm, max. opening stroke: 525mm, opening stroke: 375mm. Screw diameter: 35mm, injection volume: 134 cm³, injection pressure: 1485bar. Dimensions X/Y/Z: approx. 3300mm/1300mm/1900mm, weight: approx. 2500kg. On-site inspection is possible.

więcej

Maszyna do formowania wtryskowego

Arburg 420C 1500

Niemcy

1999

używany

na żądanie

INNO27341

Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible.

więcej

Maszyna do formowania wtryskowego

Arburg 420C 1000

Niemcy

2013

używany

na żądanie

INNO27340

Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible.

więcej

Maszyna do formowania wtryskowego

Arburg 370S 600-100

Niemcy

2012

używany

na żądanie

INNO27339

Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible.

więcej

Maszyna do formowania wtryskowego

Arburg 270S 350-100

Niemcy

2012

używany

na żądanie

INNO27338

Installation height min./max.: 200mm/550mm, opening stroke: 350mm, closing force: 350kN, screw diameter: 20mm, distance between tie bars: 270mm, max. injection volume: 31cm³, operating hours: 61737h. Documentation available. On-site inspection is possible.

więcej

Maszyna do formowania wtryskowego

Arburg 320C 600-250/ 420C 1000-250/ 270C 300-100

Niemcy

2007

używany

na żądanie

INNO27241

A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible.

więcej

Maszyna do formowania wtryskowego

Arburg 370C 1000-250

Niemcy

2002

używany

na żądanie

INNO27229

Clamping force: 1000kN, screw diameter: 30mm, platen dimensions X/Y: 570mm/570mm, opening stroke: 500mm, min./max. mold height: 250mm/750mm, injection weight: 121g/hp, injection volume: 106cm³, operating hours: 75320h.

więcej

Maszyna do formowania wtryskowego

Boy 55M

Niemcy

2005

używany

na żądanie

INNO27212

Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included.

więcej

Maszyna do formowania wtryskowego

Arburg 270 S 250-100

Niemcy

2013

używany

na żądanie

INNO27208

Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module.

więcej

Maszyna do formowania wtryskowego

Arburg 221/55-250

Niemcy

1979

używany

na żądanie

INNO27186

Clamping force: 25kN, injection force: 5.7kN, screw motor: 12Nm, heating: 3.4kW.

więcej

Maszyna do formowania wtryskowego

Krauss Maffei 50-160 C1

Niemcy

1998

używany

na żądanie

INNO27158

Clamping force: 500kN, screw diameter: 30mm, injection volume: 101cm³, injection weight: 92g, injection pressure: 1488bar, clamping plate dimensions X/Y: 540mm/540mm, distance between tie bars: 321mm, mold opening: 350mm, mold height min./max.: 200mm/550mm, weight: approx. 2300kg. Including 1 hydraulic core puller.

więcej

Obsługa robotów

Arburg Multilift H m. B-Achse

Niemcy

2019

używany

na żądanie

INNO26826

Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available.

więcej

Maszyna do formowania wtryskowego

Arburg Allrounder 680 CB 650-170

Niemcy

2018

używany

na żądanie

INNO26744

Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible.

więcej