▷ Używane maszyny do przetwórstwa tworzyw sztucznych z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Przetwórstwo tworzyw sztucznych [121 - 140 of 179]

Maszyna do formowania wtryskowego

Arburg 420C 1500

Niemcy

1999

używany

na żądanie

INNO27341

Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg 420C 1000

Niemcy

2013

używany

na żądanie

INNO27340

Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg 370S 600-100

Niemcy

2012

używany

na żądanie

INNO27339

Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible.

Dmuchawa

Sig Corpoplast Blomax 12

Niemcy

2008

używany

na żądanie

INNO27319

A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg 320C 600-250/ 420C 1000-250/ 270C 300-100

Niemcy

2007

używany

na żądanie

INNO27241

A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible.

Maszyna do formowania wtryskowego

Boy 55M

Niemcy

2005

używany

na żądanie

INNO27212

There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included.

Maszyna do formowania wtryskowego

Arburg 221/55-250

Niemcy

1979

używany

na żądanie

INNO27186

Clamping force: 25kN, injection force: 5.7kN, screw motor: 12Nm, heating: 3.4kW.

Jednostka sterująca temperaturą

Regloplas P140Smart/90Smart

Niemcy

2020

używany

na żądanie

INNO27126

Four Regloplast Smart series temperature control units are available. 3x Regloplast 90Smart, year of manufacture: 2018/2018/2016, T. max.: 90°C, dimensions X/Y/Z: approx. 200mm/560mm/600mm, weight: approx. 50kg, some float switches and display defective. 1x Regloplast P140Smart, year of manufacture: 2020, T.max.: 140°C, dimensions X/Y/Z: approx. 200mm/560mm/600mm, weight: approx. 50kg. Documentation available. On-site inspection is possible.

Kontroler gorących kanałów

Hummel Temp Star Master 24

Niemcy

2001

używany

na żądanie

INNO27056

Total output: 22kW, zone output: 3.6kW, temperature control range: 50°C-500 °C, accuracy: +/- 1°C, max. altitude: 2000m above sea level, max. humidity at 30°C: 80%, degree of soiling: 2. The machine often has to be switched on and off several times to get it going. Documentation available.

Zmieniacz ekranu

Maag FSC 160

Niemcy

2009

używany

na żądanie

INNO27052

There are 3 identical Maag FSC 160 screen changers available. Screen diameter min./max.: 600mm/200mm, screen area min./max.: 28cm²/314cm², throughput min./max.: 100-1700kg/h, max. temperature tolerance: 300°C, operating pressure: 700bar, differential pressure: 100bar. Documentation available.

System spieniania PUR

Hennecke HK135

Niemcy

2005

używany

na żądanie

INNO26994

A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible.

System spawania ultradźwiękowego

Kln Ultraschall Advance 900

Niemcy

2018

używany

na żądanie

INNO26900

Number of heating cartridges: 24, heating cartridge average and length: 12.5mm/200mm, power: 630W, 230V, including resistance thermometer type PT100, heating time to 350°: 40min. Dimensions X/Y/Z: 1900mm/2100mm/3040mm, weight: approx. 2200kg. Documentation available.

Maszyna do formowania wtryskowego

Arburg Allrounder 680 CB 650-170

Niemcy

2018

używany

na żądanie

INNO26744

Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible.

Zakład formowania rotacyjnego

Reinhardt RSH40

Niemcy

2011

używany

na żądanie

INNO26673

A rotational molding machine consisting of 2 rotational units and an oven in between. Rotation unit: Weight: 7500kg, weight with load: 11500kg, on 8 350mm x 350mm base plates. Rotation unit diameter: 3300mm. Compressed air nozzles: Pneumatic connection: 1inch, water connection: 0.5inch, 6bar, height: 1500mm. Oven: Dimensions X/Y/Z: approx. 5800mm/4200mm/6800mm, weight: approx. 27000kg, max. temperature: 400°C. Documentation available.

Pralnia chemiczna

Wipa MD 1250

Niemcy

nieznany

używany

na żądanie

INNO26556

Circumferential speed: 80m/s, an on-site inspection is possible.

Centrum obróbcze

Broetje Automation STAXX C1700

Niemcy

2018

używany

na żądanie

INNO26457

Suitable for the production of 2D/2.5D laminate stacks from thermoset semi-finished products in the Fiber Placement process, speed: 60m/min, laying area: 1100x1400mm, with documentation, on-site inspection is possible.

Linia do rysowania pasm

Kraussmaffei iPul Pultrusion

Niemcy

2015

używany

na żądanie

INNO26456

There is a complete pultrusion line with three Krauss Maffei RimStar Nano pumping machines, three creels, ABUS column-mounted slewing jib crane and a KraussMaffei EW 2300 CFI winder, tensile force: 10t, max. profile dimensions: 300x50mm, max. speed: 4m/min, on-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg ALLROUNDER 900T 400-210

Niemcy

1997

używany

na żądanie

INNO26372

Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible.

Piekarnik pirolityczny

Econ EPO 300

Niemcy

2008

używany

na żądanie

INNO26041

Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible.

Maszyna do formowania wtryskowego

Netstal e-jet

Niemcy

2004

używany

na żądanie

INNO25997

Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.