Used Metal processing machines from Germany

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Tokarki [41 - 60 of 89]

Tokarka pionowa

Niles-simmons NV 20

Niemcy

2002

używany

na żądanie

INNO26063

Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible.

Tokarka CNC

Gildemeister TWIN 32

Niemcy

2002

używany

na żądanie

INNO26062

Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis.

Tokarka CNC

Index GU 800

Niemcy

1997

używany

na żądanie

INNO26046

X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.

Tokarka pionowa

Hessapp DVH 450 e

Niemcy

2005

używany

na żądanie

INNO26033

Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024.

Automatyczna tokarka wielowrzecionowa CNC

Index-werke MS 52C

Niemcy

2004

używany

na żądanie

INNO26008

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.

Automatyczna tokarka wielowrzecionowa CNC

Index-werke MS 52G

Niemcy

2004

używany

na żądanie

INNO26007

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.

Automatyczna tokarka wielowrzecionowa CNC

Index-werke MS 52G

Niemcy

2004

używany

na żądanie

INNO26005

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.

Automatyczna tokarka wielowrzecionowa CNC

Index-werke MS 52G

Niemcy

2004

używany

na żądanie

INNO26004

The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.

Tokarka CNC

Padovani Labor E255x1500

Niemcy

1996

używany

na żądanie

INNO25990

Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible.

Tokarka ze śrubą pociągową NC

West Turn 1740 NC

Niemcy

2009

używany

na żądanie

INNO25925

Swing over bed/ slide: 400/ 190mm, center height: 220mm, center distance: 1000mm, bed width: 330mm, with documentation.

Tokarka z przeciwwrzecionem CNC

Citizen & Boley Gmbh BE42

Niemcy

2005

używany

na żądanie

INNO25775

There are two Boley BE42 available, max. machining diameter: 42mm, max machining length: 120mm, max speed main/ counter spindle 8000/ 6000/min, control: Mitsubishi Meldas 635 LCC, weight: 3,3t, operating hours machine 1/ 2: 60.787/42. 200h, including bar feeder, two 12-fold tool turrets with intermediate indexing and driven tools, holder VDI 20, full counter spindle with X- and Z-axis, C-axis spindle 1, C-axis spindle 2, mechanical spindle indexing 15° spindle 2, collet holders spindle 1 and 2, workpiece removal device, milling interpolation, constant cutting speed, synchronous tapping without extractor holder, bar loader Iemca Boss 545, chip conveyor, high-pressure cooling, fire extinguishing system, further collets, tool holders and accessories are available, inspection is possible.

Tokarka uniwersalna

Knuth Compass 250

Niemcy

1991

używany

na żądanie

INNO25733

Rotational speed: 22-1800/min, an inspection is possible.

Tokarka

Schaublin 180-CCN

Niemcy

1998

używany

na żądanie

INNO25621

Connected load: 24kW.

Pionowe centrum toczenia i frezowania

Emag Reinecker VSC 250 DS

Niemcy

2002

używany

na żądanie

INNO25554

X-travel: 680mm, z-travel: 200mm, max. chuck diameter: 250mm, max. swing: 260mm, connected load: 55kW, weight: 8t.

Pionowa tokarka wielowrzecionowa

Emag VSC 200

Niemcy

1999

używany

na żądanie

INNO25553

There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation.

Tokarka karuzelowa

Dörries Scharmann CONTUMAT VC 5000/450 MC

Niemcy

2009

używany

na żądanie

INNO25496

X-travel: +/-2750mm, z-travel: 2000mm, B-travel: +/-90°, C-travel: 360°, table diameter: 4500mm, turning and circumferential diameter: 5000mm, max. turning height: 2645mm, rotational speed: 8-3000/min, controls: Siemens SINUMERIK 840D, with documentation, base, stand, crossbar, support and chisel pusher.

Centrum tokarskie CNC wielosuwakowe

Ergomat TBC-42

Niemcy

2007

używany

na żądanie

INNO25442

Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h.

Tokarka VDF

Boehringer

Niemcy

nieznany

używany

na żądanie

INNO25348

Chuck diameter: 400mm, rotational speed: 11.2-560/min, track length: 2900mm, including chucks and chisel holders.

Tokarka automatyczna wielowrzecionowa

Schütte SF 51S DNT

Niemcy

1996

używany

na żądanie

INNO25314

Controls: Siemens S5, length: 7100mm, width: 2600mm, height: 2500mm, weight: 10.6t, with Bar Loader Iemca PRA 40/42/F, documentation, control cabinet, hydraulics, with bar guide and chip and coolant disposal was maintained regularly.

Tokarka CNC

Takisawa TT-500 GD

Niemcy

2018

używany

na żądanie

INNO25250

Spindle power: 3.7/7.5kW, max. rotational speed: 5000/min, controls: Fanuc Series 0i-TF, length: 2560mm, width: 2512mm, height: 2145mm, weight: 4.3t, operational hours counter: 8923h, with documentation.