▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Tokarki [101 - 120 of 161]

Tokarka dwuwrzecionowa CNC

Traub TNC 42/65 DGY

Niemcy

2015

używany

na żądanie

INNO28864

A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible.

Centrum toczenia i frezowania CNC

Mori Seiki NL3000

Niemcy

2007

używany

na żądanie

INNO28804

Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible.

Tokarka

Wohlenberg V8/500

Niemcy

1943

używany

na żądanie

INNO28796

An old and dismantled Wohlenberg lathe is available. Center width: 4000mm, face plate diameter: 900mm, length: 6000mm, width: 1000mm. On-site inspection is possible.

Tokarka uniwersalna CNC

Gildemeister CTX 310 Eco

Niemcy

2009

używany

na żądanie

INNO28678

Turning diameter: 200mm, passage diameter: 330mm, passage diameter over cross slide: 260mm, travel X/Z: 160mm/460mm, feed X/Z: 24m/min, speed: 5000rpm, spindle clearance: 51mm, spindle power: 16.5kW/11kW, torque: 1665.5Nm/112Nm, tailstock: 400mm, tool positions: 12. Machine dimensions X/Y/Z: approx. 4200mm/1700mm/2300mm, weight: approx. 3500kg, control: Siemens Sinumerik 810D. Including chip conveyor. Documentation available. On-site inspection is possible.

Tokarka cykliczna CNC

Knuth Proton 530 x 2000

Niemcy

nieznany

używany

na żądanie

INNO28659

Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: +/-0.008mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible.

Tokarka centralna

Voest-alpine DA180/0,8

Niemcy

1983

używany

na żądanie

INNO28649

Center height: 180mm, center width: 800mm, turning diameter over bed/face slide: 380mm/200mm, spindle bore: 52mm, speed: 1500rpm, bed width: 330mm, quill stroke: 180mm, quill holder: MK4, machine dimensions X/Y/Z: approx. 2000mm/850mm/1450mm, weight: approx. 1050kg. On-site inspection is possible.

Tokarka CNC

Wmz H200-O

Niemcy

2018

używany

na żądanie

INNO28632

A high-precision horizontal lathe WMZ in need of overhaul is available. Processes: Drilling, turning, milling, skiving, tool holder: VDI40, tool positions: 12, workpiece length range: 180mm-600mm, workpiece diameter range: 50mm-95mm, max. workpiece weight: 5kg, cycle time: 48min, control: Siemens 840D SL, operating hours: 15726h. Including cooling lubricant system Knoll KF 150-75, chip conveyor Knoll, air cleaner Mahle and hydraulic unit Hydac. The machine requires a complete overhaul. The machine components have been dismantled but are still present. Documentation available. On-site inspection is possible.

Tokarka centralna

Wmw DLZ 450x1600

Niemcy

1965

używany

na żądanie

INNO28608

A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.

Tokarka uniwersalna CNC

Mag Ias DUS 800 ti/6000

Niemcy

2013

używany

na żądanie

INNO28531

Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible.

Tokarka pionowa CNC

Emag VL 5 m LT

Niemcy

2003

używany

na żądanie

INNO28520

An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible.

Tokarka CNC

Hyundai HD2200

Niemcy

nieznany

używany

na żądanie

INNO28510

A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible.

Tokarka karuzelowa CNC

Rem SC50-70

Niemcy

nieznany

używany

na żądanie

INNO28446

A CNC-controlled REM vertical lathe is available. Working diameter: 2500mm-7000mm, working height: 1000mm, control: Siemens 840D. Including driven tools. On-site inspection is possible.

Tokarka pionowa CNC

Index V200

Niemcy

1997

używany

na żądanie

INNO28413

Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. The X-axis of the machine makes running noises. Documentation available. On-site inspection is possible.

Tokarka cykliczna CNC

Gildemeister NEF 520/1500

Niemcy

2006

używany

na żądanie

INNO28387

Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, speed: 3050rpm, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible.

Tokarka do długich elementów CNC

Gildemeister GD 32

Niemcy

2002

używany

na żądanie

INNO28222

Main spindle: turning diameter: 33mm, speed: 8000rpm, power: 7.5kW. Slide 1: travel X/Y/Z: 320mm/50mm/255mm, rapid traverse X/Y/Z: 30m/min, tool stations: 5. Slide 2: travel X2/Z2: 165mm/200mm, rapid traverse: 30m/min, tool station: turret, tool stations: 8, driven tools: 8. Coolant volume: 400l, pump capacity: 80l/min. Machine dimensions X/Y/Z: approx. 2500mm/1550mm/1750mm, control: Fanuc Series 16i-T. Documentation available. On-site inspection is possible.

Tokarka cykliczna CNC

Dmtg CKE 6130

Niemcy

2008

używany

na żądanie

INNO28220

Turning diameter over bed: 300mm, max. workpiece length: 500mm/600mm, travel X: 319mm, feed X/Z: 3000mm/min/4000mm/min, rapid traverse X/Z: 4000mm/min/5000mm/min, speed: 4000rpm. Collet chuck: 5C 173E, spindle bore: 40mm, tool positions: 4, spindle travel of tailstock: 110mm. Machine dimensions X/Y/Z: approx. 2000mm/1450mm/1500mm, weight: approx. 1200kg, control: Fanuc Series 0i-TC. Including 380V transformer, Fluidtec spraying system, collet set and multifix holder set. Documentation available. On-site inspection is possible.

Tokarka centralna

Weipert WG 480

Niemcy

1961

używany

na żądanie

INNO28216

Swing diameter over bed/bed slide: 480mm/340mm, turning length: 800mm, center distance: 1000mm, swing diameter in the recess: 540mm, spindle bore: 52mm, speed: 1400rpm. Quill taper: MK4, manual quill adjustment: 160mm, upper part displacement: 10mm. Machine dimensions X/Y/Z: approx. 2600mm/1100mm/1350mm, weight: approx. 2300kg. On-site inspection is possible.

Centrum toczenia i frezowania CNC

Index G200 C

Niemcy

1997

używany

na żądanie

INNO28208

Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

Tokarka karuzelowa CNC

Froriep KE-Super

Niemcy

1955

używany

na żądanie

INNO28182

A Froriep horizontal vertical lathe that was completely overhauled in 2009 is available. Faceplate diameter: 1250mm, turning height: 1100mm, circulation diameter over bed: 1400mm, power: 38kW, container volume: 1000l, control: Siemens S7. The machine has undergone extensive mechanical and electrical overhauls, including a new lubrication and cooling system and a new paint job. Documentation available. On-site inspection is possible.

Tokarka CNC

Boehringer VDF 250C

Niemcy

1992

używany

na żądanie

INNO28061

Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025.