▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Obróbka metali i obrabiarki / Szlifierki

Innovac maszyny-uzywane

Szlifierki [81 - 100 of 111]

Szlifierka powierzchniowa

Elb SWN 6 NPC-K

Niemcy

nieznany

używany

na żądanie

INNO29446

An ELB cycle-controlled surface grinding machine is available. Grinding length: 600mm, grinding width: 375mm, max. workpiece height: 375mm, magnetic clamping plate dimensions X/Y: 1000mm/375mm, table travel: 525mm, table speed: 30m/min, max. table load: 300kg. Machine dimensions X/Y/Z: approx. 2550mm/2050mm/2500mm, weight: approx. 4000kg. Including a coolant unit. st möglich.

Szlifierki do wałków CNC

Tschudin ecoLine 400

Niemcy

2013

używany

na żądanie

INNO29437

A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible.

Szlifierki do wałków CNC

Junker EJ 11

Niemcy

2009

używany

na żądanie

INNO29350

A Junker CNC cylindrical grinding machine overhauled in 2019 is available. Grinding length: 150mm, center height: 100mm, max. workpiece weight: 5kg, max. grinding diameter: 500mm, orbital diameter: 80mm, grinding wheel diameter: 400mm. Machine dimensions X/Y/Z: approx. 2850mm/1450mm/2000mm, weight: approx. 2000kg, control: Siemens Sinumerik. Including BKW chiller, Knoll VL 1000/4000 cooling lubricant system with 6500l container and Hyfra industrial recooler. Documentation available. On-site inspection is possible.

Szlifierka CNC

Mikromat 3G

Niemcy

1990

używany

na żądanie

INNO29253

Workpiece diameter range: 2mm-320mm, max. grinding length: 500mm, center distance: 1000mm, max. workpiece weight: 150kg. On-site inspection is possible.

Szlifierki do wałków CNC

König & Bauer Multimat 300

Niemcy

1972

używany

na żądanie

INNO29186

A centerless cylindrical grinding machine König & Bauer (Koebau) is available. Grinding wheel width: 300mm, max. grinding diameter: 200mm, grinding wheel bore: 305mm. Control wheel width: 300mm, control wheel bore: 127mm, speed: 85rpm, max. workpiece length (plunge grinding): 300mm. Machine dimensions X/Y/Z: approx. 3150mm/2100mm/1850mm, weight: approx. 6000kg. On-site inspection is possible.

Szlifierka powierzchniowa

Hahn & Kolb Orion 1255NC-K

Niemcy

1985

używany

na żądanie

INNO28975

A conventional precision surface grinding machine with NC control is available. Resolution: 0.001mm, travel X/Y/Z: 1200mm/550mm/400mm, table dimensions X/Y: 1600mm/450mm, table feed: 30m/min, max. table load: 750kg, spindle-table distance: 800mm, Y feed: 180mm/min, Y precision: 0.001mm, Z feed: 1200mm/min, Z precision: 0.3mm, speed: 2800rpm, grinding wheel dimensions X/Y/Z: 400mm/100mm/127mm. Machine dimensions X/Y/Z: approx. 6500mm/3000mm/2500mm, weight: approx. 6700kg. Documentation available. On-site inspection is possible.

Uniwersalna szlifierka okrągła CNC

Karstens K11 1000

Niemcy

2014

używany

na żądanie

INNO28884

A Karstens cylindrical grinding machine from 1992, which was completely overhauled and modernized in 2014, is available. Center width: 1000mm, center height: 180mm, grinding diameter: 360mm, max. workpiece weight center/flying: 250kg/70kg, grinding wheel diameter: 400mm. Spindle holder: MK4, speed: 450rpm, swivel range: 90°, quill holder: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, infeed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Including 3x centering points and grinding wheels as good as new. Documentation available. On-site inspection is possible.

Stacja szlifowania ręcznego

Aurtec HSE 500-4-3500-150

Niemcy

2018

używany

na żądanie

INNO28811

A hand sanding station from Aurtec is available. Sanding belt width: 150mm, belt length: 3500mm, belt thickness: 4mm, speed: 500rpm. Documentation available. On-site inspection is possible.

Szlifierka pił

Wmw/werkö SWSK 1450-SPS/SWSK 1450

Niemcy

1994

używany

na żądanie

INNO28718

A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.

Szlifierka narzędziowa CNC

Strausak Fleximat 91 CNC

Niemcy

1991

używany

na żądanie

INNO28513

Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible.

Szlifierka szerokotaśmowa

Weber OFZ-M1-900

Niemcy

1990

używany

na żądanie

INNO28344

Working width: 900mm, max. workpiece height: 100mm, sanding units: 1, sanding belt dimensions X/Y: 2620mm/1150mm, feed speed: 2m/min-14m/min, compressed air requirement: 1800m³/h, operating pressure: 5bar-7bar, weight: approx. 1800kg. The feed belt is no longer grippy. Documentation available. On-site inspection is possible.

Szlifierka powierzchniowa

Blohm HFS 204

Niemcy

1973

używany

na żądanie

INNO28336

Table dimensions X/Y: 760mm/200mm, max. sanding length: 500mm, max. sanding width: 230mm, table spindle center distance: 520mm, table longitudinal movement: 30m/min, table transverse movement: 16mm/stroke. Grinding wheel diameter: 225mm, grinding wheel width: 25mm, bore: 51mm, power: 5kW. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1950mm, weight: approx. 2100kg. On-site inspection is possible.

Szlifierki do wałków

Karstens

Niemcy

1974

używany

na żądanie

INNO28335

A Karstens cylindrical grinding machine with display is available. Center height: 180mm, grinding diameter: 360mm, center width: 650mm, max. workpiece weight flying/between centers: 70kg/250kg. Grinding wheel outer diameter: 400mm, face diameter: 250mm, peripheral speed: 35m/s, speed: 450rpm, mounting cone: MK4, quill diameter: 50mm, fine adjustment: 0.08mm. Machine dimensions X/Y: approx. 3250mm/2150mm, weight: approx. 3600kg. On-site inspection is possible.

Szlifierka powierzchniowa

Proth PSGS-3060AH

Niemcy

1987

używany

na żądanie

INNO28125

Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Szlifierki do wałków CNC

Gp CNC 650

Niemcy

2012

używany

na żądanie

INNO28121

A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible.

Szlifierka powierzchniowa

Ziersch Gmbh ZT 820

Niemcy

2008

używany

na żądanie

INNO27936

Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.

Szlifierka do otworów

Jung C8

Niemcy

1969

używany

na żądanie

INNO27838

Bore: 50mm, grinding depth: 80mm, spindle axis-table center distance: 145mm, grinding wheel holder: 540mm, taper: Morse 4, workpiece spindle bore: 28mm, workpiece spindle swivel: 10°/30°, grinding spindle swivel: 130mm, grinding spindle transverse movement: 30mm, table longitudinal movement: 4mm/80mm, cooling pump capacity: 140l/min. Machine dimensions X/Y/Z: approx. 2100mm/1000mm/1400mm, weight: approx. 1600kg. Including accessories and calibration measuring device. The machine was overhauled in 2002. Documentation available. On-site inspection is possible.

Szlifierki do wałków

Fortuna AFB500 AS

Niemcy

1955

używany

na żądanie

INNO27634

Center height: 135mm, max. sanding length (shaft): 500mm, max. sanding diameter: 270mm, sanding wheel diameter: 400mm, power requirement: 7.5kW, machine dimensions X/Y/Z: approx. 2000mm/1300mm/1300mm, weight: approx. 1700kg.

Szlifierka do kopiowania

Petewe Gmbh PFS 30-CNC

Niemcy

1983

używany

na żądanie

INNO26465

Was used to rework profile rollers for a hot rolling mill, was regularly serviced, with accessories, without spare parts, on-site inspection is possible, no videos available.

Szlifierka do otworów

Jung C8

Niemcy

1969

używany

na żądanie

INNO26184

Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible.