▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Szlifierki [41 - 60 of 97]

Szlifierka CNC

Doebeli FSM 150 S

Niemcy

1997

używany

na żądanie

INNO29438

A Doebeli CNC profile sanding machine including Lehman dividing head, 6x basic holders, TGXE 40 collet chuck, ER25 collet chuck holder and various sanding wheels is available. Profile width: 120mm, profile depth: 30mm, grinding stroke length: 0mm-80mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1900mm, weight: approx. 2500kg, control: GE Fanuc Series 18-M, operating hours: 43575h. Documentation available. On-site inspection is possible.

Szlifierki do wałków CNC

Tschudin ecoLine 400

Niemcy

2013

używany

na żądanie

INNO29437

A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible.

Szlifierki bezkłowe do wałków

Herminghausen SR 3

Niemcy

1994

używany

na żądanie

INNO29408

Workpiece diameter min./max.: 1mm/100mm, max. grinding length through-feed grinding/penetration grinding: 300mm/180mm, grinding wheel dimensions: 400mm/180mm/203mm, wheel wear grinding wheel/control wheel: 100mm/80mm, speed: 600rpm. Documentation available. On-site inspection is possible.

Szlifierki do wałków CNC

Junker EJ 11

Niemcy

2009

używany

na żądanie

INNO29350

A Junker CNC cylindrical grinding machine overhauled in 2019 is available. Grinding length: 150mm, center height: 100mm, max. workpiece weight: 5kg, max. grinding diameter: 500mm, orbital diameter: 80mm, grinding wheel diameter: 400mm. Machine dimensions X/Y/Z: approx. 2850mm/1450mm/2000mm, weight: approx. 2000kg, control: Siemens Sinumerik. Including BKW chiller, Knoll VL 1000/4000 cooling lubricant system with 6500l container and Hyfra industrial recooler. Documentation available. On-site inspection is possible.

Przecinarka do płyt - Szlifierka

Klingelnberg AGW 301

Niemcy

1975

używany

na żądanie

INNO29285

A gear cutter grinding machine for sharpening tools is available. max. outside diameter with helical/straight flutes: 300mm/300mm, min. cutter diameter: 60mm, max. flute grinding depth: 50mm, max. pitch angle: 45°, number of flutes: 3-45, max. grinding slide travel: 475mm, grinding wheel diameter min./max. Pitch angle: 45°, number of flutes: 3-45, max. grinding slide path: 475mm, grinding wheel diameter min./max.: 150mm/250mm, grinding spindle speed: 16m/min, speed: 2700rpm, workpiece holder: ISO40. Documentation available. An on-site inspection is possible.

Szlifierka CNC

Mikromat 3G

Niemcy

nieznany

używany

na żądanie

INNO29253

Workpiece diameter range: 2mm-320mm, max. grinding length: 500mm, center distance: 1000mm, max. workpiece weight: 150kg. On-site inspection is possible.

Szlifierki bezkłowe do wałków

König & Bauer Multimat 150-6

Niemcy

nieznany

używany

na żądanie

INNO29209

Grinding diameter: 100mm, max. workpiece length through-feed grinding/penetration grinding: 250mm/200mm, grinding wheel diameter: 500mm/600mm, grinding wheel bore: 304.8mm/254mm, regulating wheel diameter: 300mm, regulating wheel bore: 127mm/152mm, grinding and regulating wheel width: 200mm. On-site inspection is possible.

Szlifierki do wałków CNC

König & Bauer Multimat 300

Niemcy

1972

używany

na żądanie

INNO29186

A centerless cylindrical grinding machine König & Bauer (Koebau) is available. Grinding wheel width: 300mm, max. grinding diameter: 200mm, grinding wheel bore: 305mm. Control wheel width: 300mm, control wheel bore: 127mm, speed: 85rpm, max. workpiece length (plunge grinding): 300mm. Machine dimensions X/Y/Z: approx. 3150mm/2100mm/1850mm, weight: approx. 6000kg. On-site inspection is possible.

Szlifierka do powierzchni CNC

Aba Multiline 2510 CNC

Niemcy

2014

używany

na żądanie

INNO29177

A defective CNC precision surface and profile grinding machine ABA is available. Grinding length: 2500mm, grinding width: 1020mm, cross travel: 920mm, cross feed intermittent: 750mm/pulse, cross feed continuous: 5000mm/min, table spindle center distance: 1100mm, magnetic plate dimensions X/Y: 2500mm/1000mm, max. table load: 5000kg, table speed: 60m/min, spindle power: 26kW, grinding wheel dimensions X/Y/Z: 500mm/100mm/203mm, grinding wheel rotation speed: 35m/s. Machine dimensions X/Y/Z: approx. 8000mm/4000mm/3150mm, weight: approx. 20000kg, control: Siemens Sinumerik 840 D-Solutionline, operating hours: approx. 1000h, cycle time: approx. 400h. Including cooling unit Hyfra sigma 13-S, year of manufacture: 2014. The linear drive of the X-axis is defective and has been dismantled. Documentation available. On-site inspection is possible.

Szlifierki do wałków

Kikinda D15-2600/250

Niemcy

1990

używany

na żądanie

INNO29174

Center height: 250mm, center width: 2600mm, max. sanding length: 2600mm (2400mm), max. sanding diameter: 500mm, sanding spindle slide cross adjustment: 320mm, sanding spindle slide tilt: 90°. Grinding wheel diameter: 750mm, grinding wheel width: 80mm, grinding wheel bore: 304.8mm. Radius device: 2mm-10mm, digital display resolution X/Z: 0.001mm/0.01mm, digital display manufacturer: Alilan. Documentation available. On-site inspection is possible.

Szlifierka powierzchniowa

Hahn & Kolb Orion 1255NC-K

Niemcy

1985

używany

na żądanie

INNO28975

A conventional precision surface grinding machine with NC control is available. Resolution: 0.001mm, travel X/Y/Z: 1200mm/550mm/400mm, table dimensions X/Y: 1600mm/450mm, table feed: 30m/min, max. table load: 750kg, spindle-table distance: 800mm, Y feed: 180mm/min, Y precision: 0.001mm, Z feed: 1200mm/min, Z precision: 0.3mm, speed: 2800rpm, grinding wheel dimensions X/Y/Z: 400mm/100mm/127mm. Machine dimensions X/Y/Z: approx. 6500mm/3000mm/2500mm, weight: approx. 6700kg. Documentation available. On-site inspection is possible.

Szlifierka do zewnętrz wałków CNC

Willi Göbel GRS-III-2400-SP

Niemcy

2016

używany

na żądanie

INNO28938

Grinding wheel diameter: 220mm, grinding wheel width: 5mm, base body width: 20mm, bore diameter: 52mm. Test piece: diameter: 100mm, width: 300mm, profile height: 35mm. Small workpiece: Outer diameter: 400mm, bore diameter: 205mm, wheel width: 100mm, torque: 20Nm, weight including mandrel: 200kg. Large workpieces: Outer diameter: 700mm, bore diameter: 350mm, disk width: 300mm, torque: 800Nm, weight: 250kg. Accuracy: Repeat accuracy: less than 2µm, axial and radial run-out accuracy (large spindle): less than 2µm at 400mm diameter, axial and radial run-out accuracy (small spindle): less than 2µm at 200mm diameter, parallelism over 300mm between test piece and workpiece axis: less than 2µm. Tool spindle speed: 10000rpm, small workpiece spindle: 23000rpm, large workpiece spindle: 6000rpm, test piece spindle: 1000rpm.

Uniwersalna szlifierka okrągła CNC

Karstens K11 1000

Niemcy

2014

używany

na żądanie

INNO28884

A Karstens cylindrical grinding machine from 1992, which was completely overhauled and modernized in 2014, is available. Center width: 1000mm, center height: 180mm, grinding diameter: 360mm, max. workpiece weight center/flying: 250kg/70kg, grinding wheel diameter: 400mm. Spindle holder: MK4, speed: 450rpm, swivel range: 90°, quill holder: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, infeed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Including 3x centering points and grinding wheels as good as new. Documentation available. On-site inspection is possible.

Stacja szlifowania ręcznego

Aurtec HSE 500-4-3500-150

Niemcy

2018

używany

na żądanie

INNO28811

A hand sanding station from Aurtec is available. Sanding belt width: 150mm, belt length: 3500mm, belt thickness: 4mm, speed: 500rpm. Documentation available. On-site inspection is possible.

Szlifierka pił

Wmw/werkö SWSK 1450-SPS/SWSK 1450

Niemcy

1994

używany

na żądanie

INNO28718

A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.

Szlifierki do wałków CNC

Junker Lean Selection Allround

Niemcy

2014

używany

na żądanie

INNO28716

X-axis: 350mm, z-axis: 1000mm, grinding diameter: 290mm, grinding length: 800mm, center height: 150mm, x-axis speed: 0.0001–10m/min, z-axis speed: 0.0001–12m/min, control: CNC Fanuc Oi-TD, connected load: 25kVA, length: 3340mm, width: 2660mm, height: 2325mm, weight: 8t. equipment/accessories: software functions for grinding spline shafts for gear pumps, external grinding cycles: plunge, straight, taper, multiple plunge, straight, taper, oscillation, straight, taper, shoulder plunge, shoulder with K-value, shoulder oscillation, DIN ISO. dressing cycles: dressing of radii as well as concave and convex shapes possible, periphery, left flank, right flank, profiles according to DIN ISO. measuring system: measuring device tec, diameter measuring head measuring range: 1mm, measuring accuracy: 0.5μm, not suitable for measuring an interrupted cut, length measuring head measuring range: -/+2mm, measuring accuracy: 0.5μm, use of two length measuring heads (2 measuring probes). operating hours: approx. 7847h. documentation available. an on-site inspection is possible.

Szlifierka powierzchniowa

Jung JF 520 E-1

Niemcy

1989

używany

na żądanie

INNO28714

Table dimensions X/Y: 600mm/200mm, grinding dimensions X/Y: 600mm/250mm, magnet dimensions X/Y: 600mm/200mm, grinding wheel diameter: 225mm, grinding wheel width: 25mm, grinding wheel bore: 51mm, spindle center-to-table distance: 350mm (+/-50mm), table feed: 20m/min, creep speed: 0mm/500mm/min, speed: 4200rpm, machine dimensions X/Y/Z: approx. 2700mm/2100mm/2100mm, weight: approx. 2500kg. On-site inspection is possible.

Szlifierka do powierzchni CNC

Jung JC 500 CNC-C

Niemcy

1994

używany

na żądanie

INNO28713

Sanding length: 500mm, sanding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, sanding wheel diameter: 225mm, sanding wheel width: 25mm, sanding wheel bore: 51mm, speed: 4200rpm, machine weight: approx. 2500kg. On-site inspection is possible.

Szlifierka do otworów

Schaudt E550 J1000

Niemcy

1988

używany

na żądanie

INNO28647

Turning diameter: 550mm, center distance: 1000mm. Includes BEDA universal cleaner and digital position indicator. On-site inspection is possible.

Szlifierki do wałków CNC

Reform RF 900 CNC

Niemcy

1998

używany

na żądanie

INNO28644

A Reform CNC rotary table surface grinding machine is available. Segment head: 560mm, segment dimensions X/Y/Z: 94mm/38mm/180mm, number of segments: 10, segment head speed: 720rpm, rapid traverse: 2m/min. Rotary table diameter: 900mm, rotary table speed: 40rpm, new segment working height: 400mm, control: Siemens 805, operating hours: 55800h. Documentation available. On-site inspection is possible.