▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Szlifierki [21 - 40 of 97]

Szlifierka tarczowa

Timesavers Int. Bv GRINDMASTER 3000

Niemcy

2001

używany

na żądanie

INNO29830

Continuously adjustable feed speed: 2-10m/min, vacuum table with water separator, filter system with pump, also suitable for small parts up to 80x80mm, also suitable for printed circuit boards and carbide parts, no over-grinding of coated surfaces (e.g. Alclad, foils, galvanized sheets), spray nozzle centrally above the disc, additional water line for coolant, separate valves for coolant and spray nozzles. Total height: 3425mm, working height: 2025mm, working level: 790-940mm (adjustable), length: 2850mm, width: 1800mm, length of the middle segment: 900mm, side distances left/right: 755/900mm. No defects known, completely overhauled in 2017, in operation until 2020. Including centrifuge, documentation and maintenance reports. An on-site inspection is possible.

Szlifierka powierzchniowa

Majevica BRB 75.30.2KA

Niemcy

nieznany

używany

na żądanie

INNO29827

Longitudinal movement of the table manual drive: 750mm, longitudinal movement of the table hydraulic drive: 730mm, transverse movement of the table manual drive: 300mm, transverse movement of the table hydraulic drive: 290mm, usable surface of the table: 700x250mm, number of T-slots: 3, width of T-slots: 14mm, vertical movement of the grinding head: 400mm, division value of the grinding head manual drive: 0.01mm, distance between the inside of the grinding wheel and the column: 347.5mm, clearance under the new grinding wheel: 355mm, maximum grinding wheel diameter: 305mm, minimum grinding wheel diameter: 230mm, grinding wheel width: 25mm, grinding wheel bore: 127mm, division value of the cross table manual drive: 0.02mm, longitudinal feed of the table hydraulically: 2-25m/min, cross feed of the table stepwise, hydraulic and adjustable: 2-16mm/stroke, cross feed of the support hydraulically and continuous: 0.5-6m/min, volume of the hydraulic unit: 35l, cooling device for grinding wheel/on demand: 30l. No defects known, with documentation, an on-site inspection is possible.

Szlifierka powierzchniowa

Elb-schliff SWBD10 VAII-U

Niemcy

1967

używany

na żądanie

INNO29789

Max. grinding length: 1000mm, max. grinding width: 500mm, max. working height: 540mm, grinding spindle slide stroke vertical/ horizontal: 465/ 500mm, swiveling range: 1800°, table clamping surface: 1500/450mm, clamping slots number: 3, clamping slots distance: 125mm, clamping slots width: 16H7mm, table cross travel: 500mm, table longitudinal travel: 1000mm. Length: 4650mm, width: 2600mm, height: 2850mm, weight: 7.1t. With machine card. The electronics were renewed in 2022. An on-site inspection is possible.

Maszyna do szlifowania boków zębów

Reishauer RZ 362

Niemcy

2018

używany

na żądanie

INNO29757

A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible.

Szlifierka do powierzchni CNC

Wagner FSG 1640 HD III

Niemcy

2015

używany

na żądanie

INNO29730

Grinding length: 1000mm, grinding height: 370mm, magnetic plate dimensions X/Y: 1000mm/400mm, grinding wheel dimensions X/Y/Z: 355mm/30mm/127mm, speed: 1750rpm, machine dimensions X/Y/Z: approx. 4000mm/1750mm/1950mm, weight: approx. 3500kg, control: Chevalier. Documentation available. An on-site inspection is possible.

Szlifierki do wałków

Carl Zeiss HKM 063

Niemcy

1986

używany

na żądanie

INNO29725

An old precision cylindrical grinding machine Carl Zeiss is available. Includes numerous accessories and tools. An on-site inspection is possible.

Szlifierka do noży

Mvm

Niemcy

2019

używany

na żądanie

INNO29707

An industrial knife grinding machine MVM for sharpening woodworking parts is available. Knife length: 6000mm, control: Siemens PLC with remote control. Includes an extraction system, a magnetic table, and a chip filter. Documentation available. An on-site inspection is possible.

Przecinarka CNC

Anthratec CUT 400 A

Niemcy

2020

używany

na żądanie

INNO29678

A CNC cut-off grinding machine Anthratec, previously used for cutting grids, is available. Cutting speed at 2000rpm: approx. 42m/s, speed range: 500–3500rpm, connected load: 30kW, control: Siemens S7-1200. Documentation available. An on-site inspection is possible.

Szlifierka do powierzchni CNC

Jung JA 500 CNC-C

Niemcy

1995

używany

na żądanie

INNO29665

A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible.

Szlifierki do wałków

Karstens 16A-300

Niemcy

2016

używany

na żądanie

INNO29644

A universally overhauled in 2016 universal grinding machine Karstens from the year 1968 is available. Grinding length: 320mm, centre height: 150mm, grinding wheel diameter: 350mm, spindle diameter: 60mm, workpiece headstock: MT4, tailstock: MT4. Includes approx. 200l wet grinding unit, 3x grinding wheel holders, internal grinding unit, grinding spindle, quick clamping device, collet holders, various chucks, and extraction system. Documentation available. An on-site inspection is possible.

Polerka przelotowa wibrościerna

Rösler R 550/4600 DA

Niemcy

1995

używany

na żądanie

INNO29634

A complete vibratory finishing system Rösler, consisting of several components, is available. 1) Trough-type system Rösler R 550/4600 DA, connected load: 15kW, weight: approx. 6000kg. 2) Water treatment centrifuge Rösler Z 600 ASS-1-Turbo. 3) Conveyor belt Rösler R 360/4100 FB/S, belt length: 8220mm, width: 379mm, weight: approx. 400kg. 4) Conveyor belt Rösler R 360/2800 FB/T, belt length: 5650mm, width: 379mm, weight: 230kg. 5) Discharge belt Rösler R 600/2000 FB/T, belt length: 4050mm, width: 620mm, weight: approx. 310kg. Documentation available. An on-site inspection is possible.

Szlifierka powierzchniowa

Matra MF 6A

Niemcy

nieznany

używany

na żądanie

INNO29621

Grinding length: 600mm, grinding width: 250mm, table dimensions X/Y: 600mm/250mm, max. table speed: 22m/min, table height: 1020mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm. Machine dimensions X/Y/Z: approx. 1800mm/1100mm/1900mm, weight: approx. 1500kg. The machine was sealed about 5 years ago but currently shows a new leakage. Documentation available. An on-site inspection is possible.

Szlifierki do wałków

Kellenberger S11

Niemcy

nieznany

używany

na żądanie

INNO29620

An older precision cylindrical grinding machine Kellenberger including accessories is available. Centre width: 200mm, centre height: 125mm, max. workpiece weight: 3kg, max. workpiece diameter: 245mm, max. workpiece length: 130mm. An on-site inspection is possible.

Szlifierka do zewnętrz wałków

Studer S 40-2

Niemcy

nieznany

używany

na żądanie

INNO29592

Centre height: 175mm, centre width: 1000mm, max. external grinding diameter: 350mm, max. grinding length: 1000mm, max. workpiece weight: 130kg, grinding wheel dimensions X/Y/Z: 400mm/80mm/127mm. Machine dimensions X/Y/Z: approx. 2700mm/1700mm/1700mm, weight: approx. 3300kg, operating hours: approx. 21315h. An on-site inspection is possible.

Szlifierka CNC

Hauser CNC 4SM

Niemcy

1980

używany

na żądanie

INNO29591

A CNC jig grinding machine Hauser is available. Weight: approx. 3000kg, control: ADCOS CNC 400, control option: ASS. Includes a coolant system and various accessories. An on-site inspection is possible.

Polerka przelotowa wibrościerna

Rösler R 280/24 SE

Niemcy

2008

używany

na żądanie

INNO29585

A complete Rösler mass finishing machine is available. 1) Central mass finishing machine (centrifugal system) Rösler RotoMatic R 280/24 SE, year of construction: 2008, connected load: 18kW, weight: approx. 7500kg. 2) Rotary dryer Rösler RT 550 EURO-So., year of construction: 2008, connected load: 8.9kW, weight: approx. 1050kg. 3) Rösler R 290/4500 FB/T conveyor belt, year of manufacture: 2008, belt width: 290mm, belt length: 4900mm, connected load: 0.55kW, weight: approx. 430kg. 4) Buffer chute Rösler R 16/6/4 PR, year of construction: 2008, connected load: 4kW, weight: approx. 570kg. 5) Feeding unit Rösler BE 200 K-So., year of manufacture: 2008, connected load: 1.1kW, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Szlifierka taśmowa

Grindingmaster MCSB/B2-900

Niemcy

1984

używany

na żądanie

INNO29580

A Grindingmaster wide belt sanding and brush deburring machine is available. Working width: 900mm, max. workpiece thickness: 150mm, belt speed: 20m/min, conveyor speed: 20m/min, table height adjustment: +/-75mm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 2000kg. The sanding brushes are defective. On-site inspection is possible.

Szlifierka powierzchniowa

Diskus DWH 1600/3000/ So

Niemcy

1972

używany

na żądanie

INNO29577

A horizontal double-sided face and surface grinding machine Diskus is available. Grinding wheel diameter: 600mm, grinding wheel width: 150mm, workpiece dimensions X/Y: 1600mm/3000mm, machine dimensions X/Y/Z: approx. 5000mm/5000mm/3000mm, weight: approx. 11000kg. Documentation available. On-site inspection is possible.

Szlifierki do wałków CNC

Gsn PF5 UM100

Niemcy

2013

używany

na żądanie

INNO29483

A CNC cylindrical grinding machine GSN Schleiftechnik including automatic paper belt filter, center point, diamond dressing tiles and grinding wheel changing aid is available. Workpiece length: 1500mm, max. workpiece diameter: 250mm, max. workpiece weight: 150kg, machine dimensions X/Y/Z: approx. 6300mm/2500mm/2500mm, weight: approx. 9000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Szlifierka powierzchniowa

Elb SWN 6 NPC-K

Niemcy

nieznany

używany

na żądanie

INNO29446

An ELB cycle-controlled surface grinding machine is available. Grinding length: 600mm, grinding width: 375mm, max. workpiece height: 375mm, magnetic clamping plate dimensions X/Y: 1000mm/375mm, table travel: 525mm, table speed: 30m/min, max. table load: 300kg. Machine dimensions X/Y/Z: approx. 2550mm/2050mm/2500mm, weight: approx. 4000kg. Including a coolant unit. st möglich.